ESP32 uart_poll_in should return 0 on success and not
the total amount of data read.
This also adds a check in fifo_fill call to
avoid negative values, otherwise it would send garbage
to uart
Closes#41352
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
The CTE type is used in two ways by HCI layer:
1) single value representing particular CTE type: AoA, AoD 1 us,
AoD 2 us
2) bit-filed where bits 0-2 represent particular CTE types AoA
AoD 1 us, AoD 2 us
The bit-field is used to inform Controller about allowed types
of CTE, hence single value carries more than one value.
To avoid confusion between these use cases in code that refers
to case 1) all named cte_type (singular form). For case 2)
cte_types (plural form) is used.
There is an enumeration that is used for both cases:
bt_df_cte_type. For cte_type only single value from the
enumeration may be assigned to variable except
BT_DF_CTE_TYPE_NONE and BT_DF_CTE_TYPE_ALL.
For cte_types all enum members may be used. Ocasionally
BT_DF_CTE_TYPE_NONE may be excluded. If that is true,
it is described in code documentation.
Thanks to that applications are released from requirement
to include hci.h header file.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There were no implementation for HCI_LE_Connection_CTE_Request_Enable
command from BT 5.3 Core specification.
The PR adds implementation and API to be used by applications.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Don't re-enable the DIO1 interrupt when the modem is in sleep mode. This
fixes the power regression introduced in Zephyr v2.7.0 #41026.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Validate unplug a already unplugged queue, this should not
affect the status of queue and return expected value.
Signed-off-by: Lixin Guo <lixinx.guo@intel.com>
Add test for cancelling unqueued(idle) work items, this should not
affect the work item and return value as expected.
Signed-off-by: Lixin Guo <lixinx.guo@intel.com>
The msg_sram resides in the sram region, where the
m_can controller direcly access it. Whenever the driver
writes to the msg_sram and operations are triggered, the
cache needs to be invalidated.
Signed-off-by: Alexander Wachter <alexander@wachter.cloud>
test_kernel_cpu_idle assumes that CPU's next timer wakeup will be
1 millisecond in the future based on kernel timer it sets. Move tick
synchronization delay into test loop so this will always be the case.
Fixes#41347
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
connect SPI1 MISO pin D12 (pa6) on SPI1 MOSI pin D11 (pa7)
on the ARDuino connector CN5 of the nucleo board
Signed-off-by: Francois Ramu <francois.ramu@st.com>
RM 0453: the sw is allowed to write the Oversampling
ratio or shift of the ADC Config.Reg.2 only when ADSTART = 0
(no conversion is on-going). So disabling it will be stopped.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
RM 0453: the sw is allowed to write the Data Resolution bits
of the ADC Config.Reg.1 only when ADEN = 0 (ADC disable).
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Remove the custom GPIO driver instantiation for `vnd,gpio` compatibles
in "build_all" tests. The devices are now instantiated in `gpio_test.c`.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Add a dummy driver for the `vnd,gpio` compatible to allow compilation of
drivers utilising GPIO when running "build_all" tests.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Code that is part of radio_df_cte_inline_set_enabled may be not
compilable for targets that do not have Direction Finding Extension
in Radio peripheral. Added condition with IS_ENABLED to execute
the code only for those SOCs that have the extension.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There were changes done to controller code that cause
tests to do not build and fail during execution.
Changes are related with:
- modified code related with extended advertising ADI
field handling
- added generic double buffer data structure that is
used in controller
- moved code that was building only when DF is enabled
- added EVENTS_PHYEND that is not available in nrfbsim
board
The PR addresses those issues.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Connectionless mode of direction finding was based on assumption
that PDU ends when EVENTS_END is generated.
Advertiser added CTE length to IFS duration to correctly maintain
IFS between consecutive PDUs.
Scanner was using separate API to configure radio to configure
software TX/RX mode switch to use PHYEND event instead of END.
Currently every SOC that has Direction Finding Extension in
Radio peripheral uses PHYEND event to mark end of PDU.
There is no need for separate API to configure software switch.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Radio peripheral that includes Direction Finding Extension is
able to generate EVENTS_PHYEND at very end of received PDU.
In case there is a Constant Tone Extensions in received packet
the EVENTS_PHYEND event is generated after end of CTE reception.
If the CTE is present in received packet, the EVENTS_PHYEND
event is generate in the same instant as EVENTS_END.
If CTEINLINE is enabled then Radio will do a runtime packet parsing
to check if CTEInfo is present in received packet. In case there
is no CTEInfo the EVENTS_PHYEND event will be generated with
16 us delay after EVENTS_END.
To maintain the IFS, additional EVENT_COMPARE is used that
will timeout earlier than regular EVENT_COMPARE for EVENTS_PHYEND
generated withtou delay. That additional EVENT_COMPARE will start
software switching of radio mode to TX. In case there is a CTEInfo
present in the packet, additional PPI wiring will cancell
EVENTS_COMPARE set for delayed EVENTS_PHYEND.
The commit provides changes to support delayed PHYEND for nRF53 SOCs.
Besides that there are small formatting corrections due to extended
max line length.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In connected mode when Receiving Constant Tone Extensions feature
is enabled, controller shall be able to receive CTE in any
data channel packet.
The commit adds required changes to allow receive of CTE for
all data channel packets in peripheral role.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
CTEInfo may be stored in S1 byte for BLE1M or BLE2M data channel
packet or in payload of advertising channel packet. To allow
selection of where to expect the CTEInfo to be Radio and
DF lower link layer API has to be changed. New parameter
cte_info_in_s1 was introduced.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
There are multiple places where double buffer is used in controlers
code. This commit adds generic implementation of the double buffer.
It can be used in future in all places where the data structure is
in use.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Radio peripheral that includes Direction Finding Extension is
able to generate EVENTS_PHYEND at very end of received packet.
In case there is a Constant Tone Extensions in received packet
the EVENTS_PHYEND event is generated after end of CTE reception.
If the CTE is not present in received PDU, the EVENTS_PHYEND
event is generate in the same instant as EVENTS_END.
If CTEINLINE is enabled then Radio will do a runtime packet parsing
to check if CTEInfo is present in received packet. In case there
is no CTEInfo the EVENTS_PHYEND event will be generated with
16 us delay after EVENTS_END.
To maintain IFS, additional EVENT_COMPARE is used that
will timeout earlier than regular EVENT_COMPARE for EVENTS_PHYEND
generated withtout delay. That additional EVENT_COMPARE will start
software switching of radio mode to TX. In case there is a CTEInfo
present in the packet, additional PPI wiring will cancell
EVENTS_COMPARE set for delayed EVENTS_PHYEND.
The commit add support for delayed PHYEND event for nRF52 SOCs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
To make possible to correclty receive PDUs that optionally include
Constant Tone Extension after CRC the PHYEND event must be used
instead of END event. PHYEND event is generated by Radio peripheral
for actual end of a PDU. In case there is a CTE the PHYEND event
is generated at end of the CTE. If PDU does not have CTE, then
PHYEND event is generated at end of CRC. In this case it is the
same instant as END event.
Use of PHYEND event is required only when BLE 5.1 Receiving Constant
Tone Extensions feature is supported. Because it is the same event as
END for SOCs that supports Direction Finding Extension, it is always
used for that SOCs.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Changed resource IDs 11 and 12 of the security object to use
signed integer as they are defined in the OMA specification.
Signed-off-by: Jarno Lamsa <jarno.lamsa@nordicsemi.no>
Update the connectivity monitor object to version 1.2.
OMA core specification for the object adds 2 optional
resources.
Signed-off-by: Jarno Lamsa <jarno.lamsa@nordicsemi.no>
According to MbedTLS API documentation, its session must be reset if
mbedtls_ssl_handshake returns something other than:
- 0
- MBEDTLS_ERR_SSL_WANT_READ
- MBEDTLS_ERR_SSL_WANT_WRITE
- MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS
- MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS
In MBEDTLS_ERR_SSL_ASYNC_IN_PROGRESS and
MBEDTLS_ERR_SSL_CRYPTO_IN_PROGRESS cases the function must be called
again when operation is ready. These cases now return -EAGIN or
continue to retry if it's a blocking call.
Signed-off-by: Ramiro Merello <rmerello@itba.edu.ar>
This commit adds the API of page_layout that will make test of
test/drivers/flash pass on it8xxx2_evb board.
Signed-off-by: Tim Lin <tim2.lin@ite.corp-partner.google.com>
Add the BT_GATT_WRITE_FLAG_EXECUTE flag that indicates
whether a write callback is from an ATT execute write.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The current implemenation of GATT long write
(ATT prepare + exec write) worked by sending
each segment individually to the application.
This was a simple and effective method, but
the application had no indication of when the
last segment had been written.
This commit reassembles all the prepare writes
for a specific handle, and then sends the combined
write data to the application.
The prepare+exec write may include multiple handles,
so the implementation has taken that into account,
and will loop over the prep_queue multiple times.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Change the type of the prep_queue to a linked list
instead of a fifo. The main reason for this, is
that we can then iterate over the content in it,
without popping it.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This sample requires to much flash compared to nucleo_l552ze_q
available resources.
Remove it from this sample.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add host API to allow execution of HCI_LE_Set_Connection_CTE_Transmit_-
Parameters HCI command.
The commit also provides a refactored version of hci_df_set_conn_cte_tx-
_param function. The function was aligned to other hci_df_XXX functions
structure with separated parameters validation and preparation of
command object before it is send to controller.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Co-authored-by: Emil Gydesen <Thalley@users.noreply.github.com>
Update outdated nrf21540 FEM pins configuration.
New pins have been added and the mcu selection is handled by the MPSL
FEM module.
The current setup would not work with TFM enabled since the mcu select
code would not be included in the secure image.
Since this is the responsebility of the MPSL FEM module remove it so
that there is only one place that needs to be updated for TFM.
Copy FEM pin configuration for Thingy:53 board from cpunet device tree
configuration to the application device tree configuration so that it is
added for both application and network core as documented in user guide
for FEM in GPIO mode.
Add nrf_radio_fem_spi node to application device tree configuration.
This removes the GPIO_PULL_DOWN configuration which was not correct.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Due to a recent change in TFM, some more space should be allocated
to mcuboot flash partition (some space should be allocated for OTP)
(Cf commit db07170a34f ("Platform: Allocate space in flash for OTP")
in trusted-firmware-m repo)
Take this into account and increase mcuboot flash partition for
nucleo_l552ze_q_ns target.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Due to a recent change in TFM, some more space should be allocated
to mcuboot flash partition (some space should be allocate for OTP)
(Cf commit db07170a34f ("Platform: Allocate space in flash for OTP")
in trusted-firmware-m repo)
Take this into account and increase mcuboot flash partition for
nucleo_l552ze_q_ns target.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
TFM disables the FPU on this target, so the test will usagefault
with a NOCP exception type when run.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
mps2_an521 and mps3_an547 need more time with TFM 1.5 to pass their
tests. This change gives it 2x as many instructions by changing the
tick speed of the watchdog to half it's prior frequency.
Signed-off-by: Jimmy Brisson <jimmy.brisson@linaro.org>
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In TF-M 1.5 some defaults changed. Some of our CMake code was
unfortunately making assumptions about the defaults.
This is now rectified. The TF-M CMake variables that had their
defaults changed are now always set dependent on the Kconfig values
and we no longer leave the CMake variables unset and with default
values.
A cleanup will be done later to not rely on default values for all
variables. This patch only fixes the defaults that have changed.
Also, TFM_PSA_API is removed as it is now an internal variable.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
OS_MGMT_TASKSTAT depends on THREAD_MONITOR, so when it defaults to y
and THREAD_MONITOR is disabled we get a build error.
Add a depends on to enforce a correct configuration.
Remove default y, as features should be default n.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
zephyr_os_mgmt_task_at and friends are ifdef'ing on a feature they
depend on instead of their own Kconfig option.
Which is not correct.
ifdef on CONFIG_OS_MGMT_TASKSTAT instead.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
