Adds a shim layer around the mcux adc16 driver to adapt it to the Zephyr
adc interface.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds common and Kinetis-specific adc device tree properties, and updates
all Kinetis SoC and board dts files to include adc nodes.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The Kconfig assumed that there would only ever be one instance of an
adc, but some Kinetis devices have multiple adc instances.
Jira: ZEP-1396
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch addresses the following issues:
* Aligns the Kconfig code style with Zephyr projects requirements.
* Removes redundant "depends on" from Kconfig.
Change-Id: I46a156581cdf79d0ba8f0030ce7b595469db1bcb
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Correct an error in ADC Kconfig. The # in the beginning of
the code lines unintentionally commented out the "if" condition.
Jira: ZEP-645
Change-Id: Ieee1bdbf4865fc39aef9a0986036fd81a75e5b58
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
Correct ADC resolution definition and default value in Kconfig.
QMSI uses different definition for sensor. But, Kconfig did not
reflect the difference.
Change-Id: I8e57aa5670bff0e5b29bf0772159834e4b902d88
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
ADC driver is now using new system log macros, also update the Kconfig
variable to be a level rather than a bool.
JIRA: ZEP-311
Change-Id: Iac96c37989e44484808ded515397d457186240e0
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
Convert leading whitespace into tabs in Kconfig files. Also replaced
double spaces between config and <prompt>.
Change-Id: I341c718ecf4143529b477c239bbde88e18f37062
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
I noticed that even though I was building w/o ADC, that some
ADC config symbols were still defined. Adding some "depends on"
to clean that up.
Change-Id: Ie73d131ba1ad63b5f3d920e17b4c7b5a0d785609
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Fix naming and use a global driver name for instance.
Change-Id: I30a54cb9c20773e1b6fdc57b934aa564612a6c45
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This moves the kconfig options for each drivers into their own
submenus. This makes menuconfig easier to navigate.
Change-Id: I2bdc8c3b61e424248ffb65385a7eabc797d89684
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Config options 'Clock Radio and 'Serial Delay' appeared out of ADC menu
due to a missing dependency on ADC_QMSI.
Change-Id: Ia1ca0d5a4ea676205a5928689c2adee9e26c2691
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This creates the QMSI ADC driver which is simply a shim driver based
on the ADC driver provided by QMSI BSP.
In order to enable this driver, the following options should be set:
CONFIG_QMSI_DRIVERS=y
CONFIG_QMSI_INSTALL_PATH="/path/to/libqmsi/directory"
CONFIG_ADC=y
CONFIG_ADC_QMSI=y
Optionally this can be set:
CONFIG_ADC_IRQ
CONFIG_ADC_PRI
CONFIG_ADC_QMSI_POLL
CONFIG_ADC_QMSI_INTERRUPT
CONFIG_ADC_QMSI_CALIBRATION
CONFIG_ADC_QMSI_CLOCK_RATIO
CONFIG_ADC_QMSI_SERIAL_DELAY
CONFIG_ADC_QMSI_SAMPLE_WIDTH
Origin of the file: This file has been created from scratch
Change-Id: Ie04776ac2ed88e56852409070edec568974f8e0d
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Part of making the device model work, is using a more generic name for
the devices. Currently the ADC uses 2 possible solutions, when it should
be using just one name for them all.
Change-Id: Id9b78b3edf234391819847bb9b8534747d7d4409
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
There can only be one instance of an ADC, but we have code setup for
multiple.
Change-Id: I94eae2450bdc6b138ebad66f80a7c451cefe32a9
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The ADC for DesignWare is currently setup to handle multiple dev entries,
but there only ever exists one. No reason to add to complexity for multiple
if there is only going to be one.
Change-Id: I0b77ef91160776dcf0aea1a50b144fff2b2be9e2
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
The numeric code to configure sample width in ADC needs correction.
Change-Id: I6d73db674852650f70178322d949f9b2b49f97af
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
On Curie SoC the ADC must always be configured in single ended mode.
Change-Id: Ie59b4180358153865c961b66f98321db60d4269f
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
After exiting a deep power down mode a dummy conversion is required.
Change-Id: I98dad19e168984efe7af6ad360d0cc46e6603736
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
ADC DW IP requires a calibration process each time the
IP recovers from a deep power down mode.
Change-Id: I2e02d1987af9addd9cb08a4e4e8d3848ad5b623c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Use a default priority to avoid Kconfig blocking when priority
is not set in SoC or Board.
Change-Id: I4edda47b955a7ee834f04dc40d0decbd8dee6305
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit adds the Synopsys source code for the arc ADC driver.
Change-Id: I140a63505685cda8ec9d3174b7cf4fc1e2e91b06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The ADC implementation requires that the kconfig option NANO_TIMEOUTS be
enabled as it uses the routine fiber_delayed_start().
Change-Id: Iec49fec4badd3fcf173a2d2cc9d2924299190150
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It's an SPI driven chip and proposes up to 8 channels for input
conversion. It's found on Galileo board.
Change-Id: I916367e9be0849812c6a509082a501730a01ce60
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
