Adds the chip select devicetree flags to the spi_cs_control instance.
ISM43362 chip select is ACTIVE_LOW.
Signed-off-by: Parthiban Nallathambi <parthiban@linumiz.com>
This change removes references to raw POSIX types and functions,
allowing the drivers to build without NET_SOCKETS_POSIX_NAMES.
After this, the dependency between NET_SOCKETS_OFFLOAD and
NET_SOCKETS_POSIX_NAMES can be removed.
See issue #26033 for additional context
Signed-off-by: Adam Porter <porter.adam@gmail.com>
Updating the eswifi driver to provide port information (along with
IP / net context) whenever an async message is received. This is
needed to fully populate the "remote" info in "net_context"
required whenever net_context_send is called.
Also adding code to populate "remote" info in "net_context"..
Tested with STM32 disco IOT kit. Fixes#25621
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
Updating the eswifi driver to indicate "scan completion"
to WiFi Management once scanning is done.
Tested with STM32 disco IOT kit.
Signed-off-by: Bilal Wasim <bilalwasim676@gmail.com>
By changing the various *NET_DEVICE* macros. It is up to the device
drivers to either set a proper PM function or, if not supported or PM
disabled, to use device_pm_control_nop relevantly.
All existing macro calls are updated. Since no PM support was added so
far, device_pm_control_nop is used as the default everywhere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This API will be deprecated in favor of the new API that clearly
specifies whether it works on logical or physical levels.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
net_pkt_write() function returns 0 on success. But in this driver a
warning is thrown when zero is returned. Hence fix the driver to throw
the warning only when the negative value is returned.
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Re-run with updated script to convert integer literal delay arguments to
k_sleep to use the standard timeout macros.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Use the int_literal_to_timeout Coccinelle script to convert literal
integer arguments for kernel API timeout parameters to the standard
timeout value representations.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Newly implement socket based communication on eswifi mainly to
achive TLS. Tested with Inventek ISM43362-M3G-L44.
Signed-off-by: Saravanan Sekar <saravanan@linumiz.com>
Start es-wifi TCP server on accept.
An asynchronous (spi) message is received on client connection.
Only one connection is supported at a time.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
In order to prevent potential deadlock in various callbacks such as
accept, recv, etc... Add support for nested eswifi locking, allowing
callee to safely access back to the eswifi methods.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The eswifi controller can generate events via asynchronous messages
which can be polled via the 'MR\r' command. The messages will have a
Start Of Message Asynchronous [SOMA] and End Of Message Asynchronous
[EOMA] delimiters.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
move misc/printk.h to sys/printk.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move spi.h to drivers/spi.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
move gpio.h to drivers/gpio.h and
create a shim for backward-compatibility.
No functional changes to the headers.
A warning in the shim can be controlled with CONFIG_COMPAT_INCLUDES.
Related to #16539
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Convert DT_.*_GPIO_{CONTROLLER,PIN,FLAGS} ->
DT_.*_GPIOS_{CONTROLLER,PIN,FLAGS)
Used the following commands to make these conversions:
git grep -l DT_.*_GPIO_CONTROLLER | xargs sed -i 's/DT_\(.*\)_GPIO_CONTROLLER/DT_\1_GPIOS_CONTROLLER/g'
git grep -l DT_.*_GPIO_PIN | xargs sed -i 's/DT_\(.*\)_GPIO_PIN/DT_\1_GPIOS_PIN/g'
git grep -l DT_.*_GPIO_FLAGS | xargs sed -i 's/DT_\(.*\)_GPIO_FLAGS/DT_\1_GPIOS_FLAGS/g'
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add UDP support for eswifi driver. eswifi now can co-exist
with TCP and UDP functionality with 4 as max socket connection.
Tested UDP with custom DNS sample (wifi connect + DNS)
Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Initialize the net_pkt cursor to begining after net_pkt_write.
Without which recv_cb can't peek/get net_pkt
Signed-off-by: Parthiban Nallathambi <parthitce@gmail.com>
Per guidelines, all statements should have braces around them. We do not
have a CI check for this, so a few went in unnoticed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In the conversion of net_pkt_read_new to net_pkt_read, we missed
changing the function in the eth_smsc911x and eswifi_offload.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This parameter was removed from net_context already thus applying the
change also on net_offload API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These symbols appear within an 'if WIFI' (in drivers/wifi/Kconfig).
'if FOO' is just shorthand for adding 'depends on FOO' to each item
within the 'if'. Dependencies on menus work similarly. There are no
"conditional includes" in Kconfig, so 'if FOO' has no special meaning
around a source. Conditional includes wouldn't be possible, because an
if condition could include (directly or indirectly) forward references
to symbols not defined yet.
Tip: When adding a symbol, check its dependencies in the menuconfig
('ninja menuconfig', then / to jump to the symbol). The menuconfig also
shows how the file with the symbol got included, so if you see
duplicated dependencies, it's easy to hunt down where they come from.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
There are issues using lowercase min and max macros when compiling a C++
application with a third-party toolchain such as GNU ARM Embedded when
using some STL headers i.e. <chrono>.
This is because there are actual C++ functions called min and max
defined in some of the STL headers and these macros interfere with them.
By changing the macros to UPPERCASE, which is consistent with almost all
other pre-processor macros this naming conflict is avoided.
All files that use these macros have been updated.
Signed-off-by: Carlos Stuart <carlosstuart1970@gmail.com>
If status is 0, both ip_hdr and proto_hdr will own a pointer to the
relevant IP and Protocol headers. In order to know which of ipv4/ipv6
and udp/tcp one will need to use respectively net_pkt_family(pkt) and
net_context_get_ip_proto(context).
Having access to those headers directly, many callbacks will not need
to parse the packet again no get the src/dst addresses or the src/dst
ports. This will be change after this commit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Move to using the generated DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_pin and
DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_CONTROLLER defines and drop the
DT_ESWIFI0_CS_GPIOS_PIN & DT_INVENTEK_ESWIFI_ESWIFI0_CS_GPIO_PIN from
dts_fixup.hl
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The eswifi controller is capable of acting as an Access Point.
Implement ap_enable/ap_disable methods.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Create eswifi_at_cmd and eswifi_at_cmd_rsp helpers, allowing to send an
at command and parse the at response. These methods return success if
the response contains the OK* string. The eswifi_at_cmd_rsp method
extracts response content/size (DATA) on success.
*Response format is:
\r\n[DATA]\r\nOK\r\n>
Where DATA can be arbitrary (ASCII or not).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
The introduction of -fno-common caused a link error in eswifi driver due
to lack of missing extern on eswifi_bus_ops_spi. Adding the extern
resolves the link error.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This patch adds support for blocking tcp receive (with timeout).
This patch removes dedicated socket polling thread to use common
eswifi workqueue instead.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Current implementation unconditionnaly performs blocking connect
and send. Add support for non-blocking version using eswifi workqueue.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>