These were part of latency_measure benchmark, but was
used in all benchmarks.
legacy symbols in timestamp.h were replaced to unified
ones. Tick based checks have been replaced with ms based
checks in line with the new APIs.
Change-Id: I1d27310023be4cafbceccf50cb87d72b6681443d
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Instead of using a hard-coded string, make the sample use the Kconfig
variable for the device name.
Change-Id: Ib09f594e1cba221f9064318572bd90d38bd2733a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Change BREDR_NAME to DEVICE_NAME so it can also be used as the LE
device name.
Change-Id: I9ef55d9dff098372d47d9d5754ad7a7163a65bc0
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The for loop could exit with a out of bounds (variable j) value for
the delayed_threads array, we verify for the variable value before
operating on the array
This issue was reported by Coverity
Coverity-CID: 160078
Change-Id: I6aa1cc325cc363be48cd72b2a58d0a55ec3854bc
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Option CONFIG_NET_IPV6_NO_DAD is not used anymore, clean project
configuration files.
Change-Id: I368e076d2f79f1d4bc86edee11ff5befe37362c8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Routing tests uses ND so do not disable it, otherwise tests might fail
if disabling ND supported.
Change-Id: Ie020de8dac4447931d1067f1ed781a72cf05e8af
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The cause for this change is TCP. Until now, the radio strategy driver
(ALOHA or CSMA) was providing the actual nbuf, and not the buffer
fragment, counting on the fact that the loop was using
net_buf_frag_del() which made so, iteration after iteration, buffer
framgent to be always buf->frags. The problem with this logic is loosing
the fragments that might be still referenced by TCP, in case the whole
buffer did not make it so TCP can retry later and so on.
Instead, TX now takes the nbuf and the actual frag to send. It could
have been working with just a pointer on the data, and the whole length
of the frame. But it has been avoided due to possible future devices,
that will be smarter and run CSMA directly in the hw, thus it will
require to access the whole buffer list through the nbuf.
Change-Id: I8d77b1e13b648c0ec3645cb2d55d1910d00381ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The option is no longer used so it can be removed.
Use CONFIG_NET_IPV6_ND option instead.
Change-Id: Ibaa3d3deb52b8b176e85f8b9e1d8c80c1026aea1
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Use printk(), snprintk() instead of printf() and snprintf().
CONFIG_STDOUT_CONSOLE is anyway disabled by default so printf()
will not output anything without it.
Change-Id: I5899741df2e187dae7b4602d074e9b4cbb9952aa
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The debug config was incorrect.
Change-Id: Id32cbcfb809acc9e4ab202b401d25e41a7531c42
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
We're using SPDX tags for Apache 2.0 licensing instead of the
Apache 2.0 boilerplate comment block.
Change-Id: I9e56f918ab4ed4d127dbe64538c9fa62886386a8
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Remove dev driver and integrate it in the default pinmux driver.
Jira: ZEP-958
Change-Id: I55670240f8a21749d3a6ae22e300e16ba80a2fb6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to include/gpio.h, GPIO_INT_LEVEL is 0,
which means the branch to test GPIO_INT_LEVEL is
always false and GPIO_INT_LEVEL cases will always
pass.
This patch also fixes another minor bug in main.c.
Coverity-CID: 160074
Change-Id: I1fefa978e65bf801f244b4c2960cb87a26b0829e
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
According to Coverity, rand() is a risk function.
So we use another method to generate random value.
Coverity-CID: 160070
Change-Id: Icb7e06cd43cb8bade6596cc37e9d04bfc59e1de7
Signed-off-by: Qiu Peiyang <peiyangx.qiu@intel.com>
In RISCV, stack always grows by a multiple of 16 bytes, even if we are saving
data of size < 16 bytes onto the stack.
Hence, for riscv32 architecture increase stack size to 512 for
threads_customdata, otherwise we experience stack overflow.
Change-Id: I805bc346b8a2c2f4ad6d0db622eb262290af942b
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
In RISCV, stack always grows by a multiple of 16 bytes, even if we are saving
data of size < 16 bytes onto the stack.
Hence, for riscv32 architecture a bigger stack size is required for
test_mpool_concept, otherwise we experience stack overflow.
Change-Id: I938aa511efcae66f0131fa1bc23bd68600421885
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
When trying to build with newlib we get:
hci_driver.c: In function 'hci_driver_open':
hci_driver.c:389:10:
error: format '%d' expects argument of type 'int', but argument 2 has
type 'uint32_t {aka long unsigned int}' [-Werror=format=]
BT_ERR("Required RAM size: %d, supplied: %u.", err,
^
This is because we have different types for {u}int32_t between newlib
and mini-libc. We have to decide how we are going to handle this going
forward. Various options include use of PRIu32, making mini-libc match
newlib's types, disabling the -Werror=format, etc.
Change-Id: I5df8fa05dd7658e1f6b2eeb8fa84e3270f3dd208
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
"struct k_mbox_msg mmsg" should be initialized before using.
"int" value returned by k_mem_pool_alloc() should be checked.
Coverity-CID: 160083
Coverity-CID: 160470
Change-Id: I35714bf9d76723c5fdd8c2963bf76b42ae1b1867
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
assert should not contain "i++" which might work differently in a non-debug
build.
Coverity-CID: 160469
Change-Id: Id8fd50127dd93de1676b812ac0888c9ec2e1b5de
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
"int" value returned by k_mem_pool_alloc() should be checked.
Coverity-CID: 160471
Change-Id: I7ec19147e7a51997fed890075b06eba30bef9126
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This patch changes Quark SE power drivers to support multicore scenarios
e.g. both LMT and ARC core are enabled and manage power.
Handling LPS states in multicore scenarios are dead simple because LPS
states are core-specific states. It means that putting the LMT core in
LPS doesn't affect the ARC core, and vice-versa. DEEP_SLEEP state, on
the other hand, affects both cores since it turns power off from the SoC
and both cores are shutdown. It means that if LMT puts the system in
DEEP_SLEEP, ARC core is shutdown even if it is busy handling some task.
In order to support the multicore scenario, this patch introduces the
SYS_POWER_STATE_DEEP_SLEEP_2 state to both ARC and x86 power drivers.
On ARC, this state works as following:
1) Save ARC execution context;
2) Raise a flag to inform the x86 core that ARC is ready to enter in
DEEP_SLEEP;
3) Enter in the lowest core-specific power state, which in this case is
LPSS.
On x86, DEEP_SLEEP_2 is very similar to DEEP_SLEEP. The difference relies
in the post_ops() which calls _arc_init() in order to start ARC core so
it can restore its context.
This patch also adds the test/power/multicore/ directory which provides
sample application to x86 and ARC cores in order to easily verify the
multicore support. In test/power/multicore/README.rst you can find more
details regarding the applications.
Jira: ZEP-1103
Change-Id: Ie28ba6d193ea0e58fca69d38f8d3c38ca259a9ef
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
"ret" returned from k_msgq_put() should be checked.
Coverity-CID: 160084
Change-Id: I192db3a67ab9489e8338f6636d4c2a6935e98d74
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
This avoids asm files from having to explicitly define the _ASMLANGUAGE
symbol themselves.
Change-Id: I71f5a169f75d7443a58a0365a41c55b20dae3029
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
The K_<thread option> flags/options avaialble to users were hidden in
the kernel private header files: move them to include/kernel.h to
publicize them.
Also, to avoid any future confusion, rename the k_thread.execution_flags
field to user_options.
Change-Id: I65a6fd5e9e78d4ccf783f3304b607a1e6956aeac
Signed-off-by: Benjamin Walsh <walsh.benj@gmail.com>
Convert testcases to use the CMSIS NVIC APIs or direct NVIC register
access rather than the internal ones so we can remove them in the future.
Change-Id: I2a5a3eae713e66944cf105e7fffa603b88522681
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
_NvicSwInterruptTrigger is only utilized by a testcase for irq handling
on ARM-V7M. Just put the code into the testcase so we dont need to
support an additional interface.
Change-Id: I763c63c32a7a52918250458351d08b8fa54069dd
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Some new tests were added that had the Apache 2.0 boilerplate licensing
instead of the SPDX licensing tag.
Change-Id: I4bde8c9c6e7a6d44bceeffb6bbcff9f62d417648
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
It is useful that the user API can know whether the connection
was established properly or not. So this commit adds status
parameter to connect callback in net_context API.
The call to connect callback needs to be set properly in TCP
code. This commit does not fix the connect callback call which
is not properly done right now in net_context.c.
Change-Id: I284a60ddd658ceef9e65022e96591f467a936a09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the prefix length % 8 is not 0, then the remaining
bit length was calculated incorrectly and the prefixes
were claimed to match even though they might not be the
same.
Adding a test cases for testing this properly.
Coverity-CID: 157591
Change-Id: I9cb5a73d5cc211ec183176400fa5e2dfd209e2da
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
- Introduce NET_LINK_ADDR_MAX_LENGTH which is either 6 or 8
depending on whether CONFIG_NET_L2_IEEE802154 is used
- Instead of being a placeholder single index array of uint8_t,
let's use NET_LINK_ADDR_MAX_LENGTH to assign the size of the
"addr" array field in the net_linkaddr_storage structure.
- Now that the "addr" field of net_linkaddr_storage contains the
true size of the link address, we can remove "storage" field
which was hard coded to 8 bytes (2 uint32_t's).
- Fix 2 references to the "storage" field of the net_linkaddr_storage
structure.
Change-Id: I2ea12058280b289f65085964eb7d503d4fd260c2
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Add kernel pipe test cases which cover basic pipe apis usage
across thread and isr
Change-Id: I11899411b305535297f2e25056678d5b7df8fb95
Signed-off-by: jing wang <jing.j.wang@intel.com>
Add fifo/fifo test cases with unified kernel, which cover
basic apis across differnt contexts - thread and isr
Change-Id: Icb61d3dcd564167b0bd70419c652e0b000869959
Signed-off-by: jing wang <jing.j.wang@intel.com>
TestPurpose: verify memory pool concepts.
All TESTPOINTs extracted from kernel documentation.
https://www.zephyrproject.org/doc/kernel/memory/pools.html#concepts
ZEP-1210
Change-Id: I6250e4c26ddf361e74a76c23082cfdb376705560
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
TestPurpose: verify memory pool APIs.
All TESTPOINTs extracted from kernel-doc comments in <kernel.h>
ZEP-1210
Change-Id: I7dcc0638e7b9c4d6b5ffe282e4fe41ca520d003f
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
TestPurpose: verify API thread safe in multi-threads environment.
Thread safe test is explained with more details here:
https://gerrit.zephyrproject.org/r/#/c/9464/7/ test_mpool_threadsafe.c
Please comment if you think it necessary as an extensive kernel test.
Jira: ZEP-1209
Change-Id: I52a7ff393d72785622c047289e7d92286e131cc7
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
TestPurpose: verify memory pool concepts.
All TESTPOINTs extracted from kernel documentation.
https://www.zephyrproject.org/doc/kernel/memory/slabs.html#concepts
ZEP-1209
Change-Id: I95c6cd666212218b9928356f9439e67a2fcf9b73
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
TestPurpose: verify memory slab APIs.
All TESTPOINTs extracted from kernel-doc comments in <kernel.h>
ZEP-1209
Change-Id: I80bc85e96110e7106b3fc5883b982d71c6a7e50b
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
tests/kernel/mem_slab --> tests/kernel/mem_slab/test_mslab
For the purpose to hold other mslab test apps.
Jira: ZEP-1209
Change-Id: I4a72b02a0a5095bb7cfbf73396b6d003ea63f92e
Signed-off-by: Sharron LIU <sharron.liu@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
