Rename reserved function names in arch/ subdirectory. The Python
script gen_priv_stacks.py was updated to follow the 'z_' prefix
naming.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
* the nsim host timer does not work as expected,
disable it, use cycle count to simulate timer tick
* optmize the freq definition of nsim_em
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
This reverts commit d4b4b99272 as it
introduced unwanted side effect: It moved the k_busy_wait() to other
clock that the one driving system timer and k_cycle_get_32(). As result,
delays created using these interfaces not matched each other.
Signed-off-by: Piotr Zięcik <piotr.ziecik@nordicsemi.no>
Not all i.mx rt socs have the same number of irqs, so move the default
configuration from the soc series level to the individual socs. The
rt1020 hardware reference manual (IMXRT1020RM Rev.1 12/2018) incorrectly
documents 160 irqs (#142-159 reserved), but the soc actually has 142
irqs.
Fixes tests/kernel/gen_isr_table for the mimxrt1020_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Add SYS_POWER_ prefix to HAS_STATE_SLEEP_, HAS_STATE_DEEP_SLEEP_
options to align them with names of power states they control.
Following is a detailed list of string replacements used:
s/HAS_STATE_SLEEP_(\d)/HAS_SYS_POWER_STATE_SLEEP_$1/
s/HAS_STATE_DEEP_SLEEP_(\d)/HAS_SYS_POWER_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
This commit cleans up names of system power management functions by
assuring that:
- all functions start with 'sys_pm_' prefix
- API functions which should not be exposed to the user start with '_'
- name of the function hints at its purpose
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
There exists SoCs, e.g. STM32L4, where one of the low power modes
reduces CPU frequency and supply voltage but does not stop the CPU. Such
power modes are currently not supported by Zephyr.
To facilitate adding support for such class of power modes in the future
and to ensure the naming convention makes it clear that the currently
supported power modes stop the CPU this commit renames Low Power States
to Slep States and updates the documentation.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Plain 'source' is globbing. 'gsource' is a leftover from an older
design, and works as a synonym for 'source'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Since commit 0906a51dac, the driver
fails the test: tests/drivers/adc/adc_api. Some of the workflow
turns out to be incorrect (e.g. not doing dummy conversion after
getting out of deep power down, and not clearing interrupt status
bits). So take some time to overhaul the driver. Also rename
the driver to adc_intel_quark_se_c1000_ss because the inner
working of this driver is tied to Quark SE C1000 SoC.
Fixes: #12632
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
On STM32F3 devices, a trick was required for normal use of registers.
This was actually an issue in flash registers defintions which should
be defined as volatile.
Fix this and additionaly, fix definition for STM32F1 which was also
lacking the volatile instruction.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
(OPTIONAL) was a vestiage from the initial import of the Zephyr code
base and we dont utilize it with the GNU linker. Additionally, the way
(OPTIONAL) gets defined to nothing creates a linker script that lld
(from llvm) doesn't like.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The iMX RT1060 and RT1064 have additional dedicated 512KB on-chip ram.
This OCRAM2 is mapped at 0x20200000, formerly OCRAM1 (flexram) mapping
which is moved to 0x20280000 in order to guarentee global OCRAM memory
continuity regardless OCRAM1 size configuration (256KB by default).
In default configuration, this gives 768KB (512+256) on-chip ram:
0x20200000 to 0x202BFFFF.
OCRAM2: 0x20200000 - 0x2027FFFF
OCRAM1(FlexRam): 0x2028FFFF - 0x202BFFFF
Add this memory region as a single node in the rt1060 device tree.
Note: MPU expects power of two memory region, in case of 768KB, let
the MPU configure 1MB instead.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
On stm32f4 series, uart4 is not an usart, so generated with
'st,stm32-usart' compatible and hence generated defined should be
prefixed with DT_ST_STM32_UART_ rather than DT_ST_STM32_USART.
Fixes#14542
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The clang ARM assembler is a bit stricter than GNU as, make a few
changes so things build with both
Signed-off-by: Peter Smith <peter.smith@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Apply a similar fix to commit 0289a410ba
to the openisa_rv32m1 linker script for handling .srodata sections.
Otherwise we get oprhan read-only data section. Fix this by adding
the .srodata section to the RISC-V linker script.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
We can turn this off in application code, but the default should be
SMP.
Oddball note: the SMP setting is in the soc layer and not arch, even
though I think it would be better there. We don't actually have a
per-arch defconfig file included by kconfig.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Redefining the config will not let another (out-of-source) driver be
chosen instead of the default. The driver is practically forced by the
soc settings. This commit moves default settings from soc/arm/nordic_nrf
into the drivers themselves.
Signed-off-by: Thomas Stenersen <thomas.stenersen@nordicsemi.no>
Update reserved function names starting with one underscore, replacing
them as follows:
'_k_' with 'z_'
'_K_' with 'Z_'
'_handler_' with 'z_handl_'
'_Cstart' with 'z_cstart'
'_Swap' with 'z_swap'
This renaming is done on both global and those static function names
in kernel/include and include/. Other static function names in kernel/
are renamed by removing the leading underscore. Other function names
not starting with any prefix listed above are renamed starting with
a 'z_' or 'Z_' prefix.
Function names starting with two or three leading underscores are not
automatcally renamed since these names will collide with the variants
with two or three leading underscores.
Various generator scripts have also been updated as well as perf,
linker and usb files. These are
drivers/serial/uart_handlers.c
include/linker/kobject-text.ld
kernel/include/syscall_handler.h
scripts/gen_kobject_list.py
scripts/gen_syscall_header.py
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The Kconfig.defconfig.efr32* files added redundant dependencies on
SOC_EFM32* that are already added in the Kconfig.defconfig.series files
that source them.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Adds a new config HAS_MCUX_FTFX to conditionalize the mcux flash driver
on socs that support it. Selects HAS_MCUX_FTFX on all kinetis socs
except kw40z, because even though this soc has the relevant hardware,
its CMSIS header file is not compatible with the mcux flash driver in
ext/.
This change also prevents enabling the mcux flash driver on lpc and imx
rt boards.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
There are some implicit rules in STM32 family Kconfig.defconfig
fragments organizations.
Add comments to explicit these rules.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
GPIO port H is available on all SoCs of L4 series.
Move Kconfig GPIO_STM32_PORTH symbol deifnition to series Kconfig
fragment Kconfig.defconfig.series.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This value always comes from DTS. No Kconfig symbol named
NS16550_REG_SHIFT ever existed.
Might've been missed in commit 603f068690 ("uart/ns16550: Use DT_ prefix
for remaining device configs").
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The INTMUX_LABEL define generated by DTS is marked as deprecated us
DT_OPENISA_RV32M1_INTMUX_INTMUX_LABEL instead.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
nRF52810 Flash and SRAM sizes do not have power-of-two values.
This commit reduces the amount of MPU regions reserved at boot
time to enforce basic permissions in Flash and SRAM memory. It
does this by selecting the next power-of-two size for the Flash
and SRAM regions, respectively. In this way we can cover the
entire Flash and SRAM space each with a single MPU region, thus,
save two MPU regions to be used by the kernel/application.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
These options were removed from kconfig in previous patch. So rename
the leftovers as shared_irq driver options are defined in DTS now.
Fix#13746
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Implements sys_arch_reboot() on the openisa_rv32m1 soc to enable zephyr
micropython on the rv32m1_vega board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Some more were added since the cleanup pass in June 2018. See e.g.
commit 2d50da70a1 ("drivers: ipm: Kconfig: Remove redundant 'default n'
properties") for a motivation. It also avoids people wondering whether
or not they need to put in 'default n'.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The IRQ defined in DTS has already been shifted so there is
no need to shift again in dts_fixup.h.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Due to fake IDT_BASE address, zephyr_prebuilt.elf is about 1.1GB
in size due to all the empty space between end of SRAM and IDT_BASE.
So move the IDT_BASE to the empty space just after SRAM. The section
will be discarded in the final zephyr.elf so it should not be a big
issue. After this change, zephyr_prebuilt.elf is now a bit smaller
than 5MB.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Previous rename from CONFIG_* to DT_* left a few remaining
CONFIG_*. So rename them manually now.
Fix#13753
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In the recent MDK brought by nrfx 1.6.2, these legacy peripherals have
been revealed as available also in nRF52810. This patch allows their
use in Zephyr drivers.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The i.MX RT1064 evk has one ethernet (10/100M) connector via KSZ8081RNB
phy. Enable related dts nodes and config flags
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
iMXRT1064 has 4MB on-chip Flash memory (flexspi2) mapped to 0x70000000.
Add it as configurable code location for MIMXRT1064-EVK board.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
CPU_LPS_n name used to indicate a low power state is cryptic and
incorrect. The low power states act on the whole SoC and not exclusively
on the CPU. This patch renames CPU_LPS_n states to LOW_POWER_n. Also
HAS_ pattern for Kconfig options is used in favor of a non standard
_SUPPORTED. Naming of deep sleep states was adjusted accordingly.
Following is a detailed list of string replacements used:
s/SYS_POWER_STATE_CPU_LPS_(\d)_SUPPORTED/HAS_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_CPU_LPS_(\d)/SYS_POWER_STATE_LOW_POWER_$1/
s/SYS_POWER_STATE_DEEP_SLEEP_(\d)_SUPPORTED/HAS_STATE_DEEP_SLEEP_$1/
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
