Kconfig options that enable I2C and SPI instances are no longer used
in nRF drivers. Remove all assignments done to these options in related
board definitions, samples, and tests.
For nrf52_pca20020, also no longer needed setting of default values
for GPIO_SX1509B* options is removed (now the gpio_sx1509b driver is
enabled by default when a corresponding devicetree node is enabled).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove prompts from Kconfig options `UART_x_NRF_UART*` that select
the type of nrfx driver (for UART or UARTE peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding UART node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between UART and UARTE for a given instance.
Since all `UART_x_NRF_UART*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove prompts from Kconfig options `I2C_x_NRF_TWI*` that select
the type of nrfx driver (for TWI or TWIM peripheral) to be used
for a given instance. This prevents the options from being modified
from configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding I2C node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between TWI and TWIM for a given instance.
Since all `I2C_x_NRF_TWI*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Remove prompts from Kconfig options `SPI_x_NRF_SPI*` that select the
type of nrfx driver (for SPI, SPIM, or SPIS peripheral) to be used
for a given instance. This prevents the options from being modified
in configuration files.
Instead, make one of these options selected by default according to the
"compatible" property set for the corresponding SPI node in devicetree.
This eliminates the need of changing both the "compatible" property in
devicetree and the Kconfig option selecting the driver type when a user
wants to switch between SPI, SPIM, and SPIS for a given instance.
Since all `SPI_x_NRF_SPI*` options are made "hidden" by this commit,
all their occurrences in configuration files are removed.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Convert driver to utilize the new DT_INST macros completely and remove
associated Kconfig symbols that now come from devicetree.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Move to using DT_NODELABEL to get references to specific GPIO ports on
various boards that utilize the arm,cmsdk-gpio controller.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Make the label property required for "arm,cmsdk-gpio" compatible
nodes. Update binding to mark the 'label' property required and updated
associated .dts files to add a 'label' property if it didn't exist.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use device node declaration instead.
Clean up GPIO_STM32_PORT* Kconfig symbols.
On some boards some gpio ports where disabled using Kconfig symbols.
Disable them now via device tree nodes in boards dts files.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Use "nRF9160 DK" throughout. Change the title to "Development Kit" and
introduce the abbreviation there.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
PWM and other flags were missing for PCA10059.
Aligned also RAM and Flash while comparing the files.
Signed-off-by: Markus Becker <markus.becker@tridonic.com>
This commit allows the `QEMU_KERNEL_OPTION` variable, which can be
overridden by the `board.cmake`, to contain references to the variables
that are not available at the time of `board.cmake` inclusion, by
expanding its escpaed variable references in `cmake/emu/qemu.cmake`
which is included nearby the end of the root `CMakeLists.txt`.
With this change, the `board.cmake` can escape variable references as
follows and allow them to be expanded later:
set(QEMU_KERNEL_OPTION "-device;loader,file=\$<TARGET_FILE:$\{...}>")
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add a k_timeout_t type, and use it everywhere that kernel API
functions were accepting a millisecond timeout argument. Instead of
forcing milliseconds everywhere (which are often not integrally
representable as system ticks), do the conversion to ticks at the
point where the timeout is created. This avoids an extra unit
conversion in some application code, and allows us to express the
timeout in units other than milliseconds to achieve greater precision.
The existing K_MSEC() et. al. macros now return initializers for a
k_timeout_t.
The K_NO_WAIT and K_FOREVER constants have now become k_timeout_t
values, which means they cannot be operated on as integers.
Applications which have their own APIs that need to inspect these
vs. user-provided timeouts can now use a K_TIMEOUT_EQ() predicate to
test for equality.
Timer drivers, which receive an integer tick count in ther
z_clock_set_timeout() functions, now use the integer-valued
K_TICKS_FOREVER constant instead of K_FOREVER.
For the initial release, to preserve source compatibility, a
CONFIG_LEGACY_TIMEOUT_API kconfig is provided. When true, the
k_timeout_t will remain a compatible 32 bit value that will work with
any legacy Zephyr application.
Some subsystems present timeout (or timeout-like) values to their own
users as APIs that would re-use the kernel's own constants and
conventions. These will require some minor design work to adapt to
the new scheme (in most cases just using k_timeout_t directly in their
own API), and they have not been changed in this patch, instead
selecting CONFIG_LEGACY_TIMEOUT_API via kconfig. These subsystems
include: CAN Bus, the Microbit display driver, I2S, LoRa modem
drivers, the UART Async API, Video hardware drivers, the console
subsystem, and the network buffer abstraction.
k_sleep() now takes a k_timeout_t argument, with a k_msleep() variant
provided that works identically to the original API.
Most of the changes here are just type/configuration management and
documentation, but there are logic changes in mempool, where a loop
that used a timeout numerically has been reworked using a new
z_timeout_end_calc() predicate. Also in queue.c, a (when POLL was
enabled) a similar loop was needlessly used to try to retry the
k_poll() call after a spurious failure. But k_poll() does not fail
spuriously, so the loop was removed.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
In the current implementation both SPSR and ELR registers are saved with
the callee-saved registers and restored by the context-switch routine.
To support nested IRQs we have to save those on the stack when entering
and exiting from an ISR.
Since the values are now carried on the stack we can now add those to
the ESF and the initial stack and take care to restore them for new
threads using the new thread wrapper routine.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Add a deprecation warning for nrf9160 DK when the old names
(nrf9160_pca10090, nrf52840_pca10090) are used instead of the
new board name. For nRF9160 SoC: do this for both secure and
non-secure board targets.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We rename the nRF91 Dev Kit board target for the NRF52840
controller (nrf52840_pca10090) to nrf9160dk_nrf52840. We
update all associated references in the supportive
documentation and all nRF9160-related cofigurations and
overlay files in the samples and tests in the tree. We
also remove an un-referenced board image file that had
erroneously been part of the documentation of this platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We rename the nRF91 Dev Kit board target (nrf9160_pca10090)
to nrf9160dk_nrf9160. We update all associated references
in the supportive documentation and all nRF9160-related
cofigurations and overlay files in the samples and tests
in the tree.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds a new `sam_v71_xult` variant with the chip revision B
device tree.
In addition, this commit enables the newly added GMAC device tree
instance.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
This commit adds a new `sam_e70b_xplained` variant with the chip
revision B device tree.
In addition, this commit enables the newly added GMAC device tree
instance.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Replace all occurences of BUILD_ASSERT_MSG() with BUILD_ASSERT()
as a result of merging BUILD_ASSERT() and BUILD_ASSERT_MSG().
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Enable the lptim1 timer on the Nucleo L432KC board. It can work with
both the LSI and the LSE as the board has a 32.768 kHz crystal.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Added properties to support the core interrupt controller on the NIOS2
cpu cores and enable that support for the NS16550 UART.
We rename some compatibles so that the cpu core compatibles is unique.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove DT_ defines in board_soc.h now that we have a device tree. We
remove all devices from the device tree that aren't known to be part
of the NRF52 BSIM simulation.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add shield definition for the MikroElektronika ADC Click. The ADC
Click carries a MCP3204 12-bit Analog-to-Digital converter in a
mikroBUS form factor.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
The board target for emulation of nRF52811 on nRF52840 DK, so far
known as nrf52811_pca10056, is renamed to nrf52840dk_nrf52811.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The nRF52840 DK board target, so far known as nrf52840_pca10056,
is renamed to nrf52840dk_nrf52840.
Its documentation and all references to its name in the tree are
updated accordingly. Overlay and configuration files specific to
this board are also renamed, to match the new board name.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This board is no longer a Preview DK but it is still described as such
in its documentation. Update its description and picture.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This adds multi-processing support for Intel Apollo Lake ADSP.
Some of the start-up code is borrowed from ESP32.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
