* current supported boards:
* emsk, iotdk, nsim, emsdp, hsdk.
* for the unsupported future boards, pls take a
reference of supported boards' board.cmake.
* mdb runner is required and the default runner for SMP
case, e.g., HSDK and nsim_hs_smp.
* other ARC boards can also choose to use mdb by
setting runner as mdb, e.g. west flash --runner mdb.
* with mdb runner, user can make a debug through mdb gui
* with arc_nsim or opencod runner (default runner), user
can make a debug through gdb cmdline.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
As a slow FPGA platform with max. freq < 25 Mhz,
the default CON_SYS_CLOCK_TICKS_PER_SEC=10000 is
not suitable. CON_SYS_CLOCK_TICKS_PER_SEC=100 is
a better value.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
The Kconfig I2C_[0-9] sybmols don't have any meaning for the majority of
SoCs. The drivers doesn't utilize them and no sample or test code does
either so we can remove setting them in board Kconfig.defconfig files.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert linker scripts and arc_mpu_regions.c setup to use new
devicetree.h macros to extract the base address and size of the various
memory regions (DDR, SRAM, FLASH, DCCM, ICCM). We also remove the
scaling up and down since DT_REG_SIZE() returns the value in bytes.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Given that nsim_em can run the tests instead of just building them as
with em_starterkit_em7d, make it a default platform instead of
em_starterkit_em7d to get most of the testing when nsim simulator is
installed on the developer machine.
Tests run are 1000x more useful than just building them, even if we do
not have a large installed base of nsim.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Now the ARC SecureShield related features are experimental. The ARC
normal application cannot run alone, need the secure service example to
initialize the context and boot.
Here move ARC normal related configurations out of board dir to
avoid the impact of CI test and the confusion to users.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Should not be set to a default platform, this is unnecessarily causing
builds of all tests on this platform for all PRs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change to code to use the automatically generated DT_INST_*
defines and remove the now unneeded configs and fixups.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Now when ARC development boards are switched to generic OpenOCD
runner we need to explicitly instruct the runner to load Elf but not
binary image (which is a default for OpenOCD runner).
This might be done either manually adding "--use-elf" option to
west's command line or that might be added by default fro affected
boards, which we do exactly now.
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/22888.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
For the non-secure image, the architecture still supports secure
execution, so express that in the defconfig.
See #22474.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some ARC deveopment boards have q bit funny memory maps.
For example IoT Development Kit board has those areas
that we use in Zephyr:
1. 256 KiB of ICCM @ 0x2000_0000 for code
(i.e. ".text" section goes here)
2. 128 KiB of DCCM @ 0x8000_0000 for data
(i.e. ".data" section goes here)
And so objcopy dumps 0x6000_0000 bytes (which is ~ 1.5Gib or raw data)
in zephyr.hex which gives us ~ 4.3 GiB of resulting zephyr.hex size.
W/o gap filling we're back at normal tens of KiB.
Given we have currently no need to fill the gaps anyways we disable it
for all ARC devboards.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
We used to use "em-starterkit" runner for ARC which is
basically heavy-modified "openocd" runner tweaked to
use GDB for loading and starting Elf files.
Now when loading and running Elf files is possible with generic
"openocd" runner we may us it. So we switch and get rid of
"em-starterkit" as well since we no longer need it.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
To be used in setups with multiple boards attached to the same one
host we need to have an ability to specify precisely which JTAG probe
to use for a particular board.
This is done by passing "ftdi_serial XXX" command to OpenOCD.
And the serial ("XXX") is supposed to be passed from higher level,
typically via west's options.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Same deal as in commit eddd98f811 ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for the remaining cases outside defconfig
files. See that commit for an explanation.
Will do the defconfigs separately in case there are any complaints
there.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Same deal as in commit eddd98f ("kconfig: Replace some single-symbol
'if's with 'depends on'"), for all symbols defined within defconfig
files. See that commit for an explanation.
Maybe 'if's were used originally to mirror the 'if's in the main Kconfig
files, and then it got copied around by people assuming 'if' must work
differently from 'depends on'. It doesn't match in every spot at least.
Better to keep it simple and just consistently use 'depends on' when
it's a single symbol/choice I think. Helps reinforce that 'if' isn't
magic too.
Verified by printing all Kconfig menu nodes (symbols, choices, menus,
etc.) before and after the change and diffing (should show no
difference).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
All board defconfig files currently set the architecture in addition to
the board and the SoC, by setting e.g. CONFIG_ARM=y. This spams up
defconfig files.
CONFIG_<arch> symbols currently being set in configuration files also
means that they are configurable (can be changed in menuconfig and in
configuration files), even though changing the architecture won't work,
since other things get set from -DBOARD=<board>. Many boards also allow
changing the architecture symbols independently from the SoC symbols,
which doesn't make sense.
Get rid of all assignments to CONFIG_<arch> symbols and clean up the
relationships between symbols and the configuration interface, like
this:
1. Remove the choice with the CONFIG_<arch> symbols in arch/Kconfig and
turn the CONFIG_<arch> symbols into invisible
(promptless/nonconfigurable) symbols instead.
Getting rid of the choice allows the symbols to be 'select'ed (choice
symbols don't support 'select').
2. Select the right CONFIG_<arch> symbol from the SOC_SERIES_* symbols.
This makes sense since you know the architecture if you know the SoC.
Put the select on the SOC_* symbol instead for boards that don't have
a SOC_SERIES_*.
3. Remove all assignments to CONFIG_<arch> symbols. The assignments
would generate errors now, since the symbols are promptless.
The change was done by grepping for assignments to CONFIG_<arch>
symbols, finding the SOC_SERIES_* (or SOC_*) symbol being set in the
same defconfig file, and putting a 'select' on it instead.
See
https://github.com/ulfalizer/zephyr/commits/hide-arch-syms-unsquashed
for a split-up version of this commit, which will make it easier to see
how stuff was done. This needs to go in as one commit though.
This change is safer than it might seem re. outstanding PRs, because any
assignment to CONFIG_<arch> symbols generates an error now, making
outdated stuff easy to catch.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Fix the following device tree warnings:
unit-address and first reg (0x20000) don't match for iccm@0
unit-address and first reg (0x80010000) don't match for dccm@80000000
Since the em_starterkit_em7d_normal has a different base address for
iccm & dccm, and most of the em_starterkit variants have different sizes
for iccm & dccm. Just define the nodes in the specific
em_starterkit*.dts file and remove them from emsk.dtsi. This removes
the issue reported in the warning.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
generated_dts_board.h is pretty redundant and confusing as a name. Call
it devicetree.h instead.
dts.h would be another option, but DTS stands for "devicetree source"
and is the source code format, so it's a bit confusing too.
The replacement was done by grepping for 'generated_dts_board' and
'GENERATED_DTS_BOARD'.
Two build diagram and input-output SVG files were updated as well, along
with misc. documentation.
hal_ti, mcuboot, and ci-tools updates are included too, in the west.yml
update.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use this short header style in all Kconfig files:
# <description>
# <copyright>
# <license>
...
Also change all <description>s from
# Kconfig[.extension] - Foo-related options
to just
# Foo-related options
It's clear enough that it's about Kconfig.
The <description> cleanup was done with this command, along with some
manual cleanup (big letter at the start, etc.)
git ls-files '*Kconfig*' | \
xargs sed -i -E '1 s/#\s*Kconfig[\w.-]*\s*-\s*/# /'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The ARC HS is a family of high performance CPUs from Synopsys
capable of running wide range of applications from heavy DPS
calculation to full-scale OS.
Still as with other ARC cores ARC HS might be tailored to
a particular application.
As opposed to EM cores ARC HS cores always have support of unaligned
data access and by default GCC generates such a data layout with
so we have to always enable unaligned data access in runtime otherwise
on attempt to access such data we'd see "Unaligned memory exception".
Note we had to explicitly mention CONFIG_CPU_ARCEM=y in
all current defconfigs as CPU_ARC{EM|HS} are now parts of a
choice so we cannot simply select ether option in board's Kconfig.
And while at it change "-mmpy-option" of ARC EM to "wlh1"
which is the same as previously used "6" but matches
Programmer's Reference Manual (PRM) and is more human-friendly.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
The ARC timer is a MHz-scale cycle counter and works very well with
the new 10 kHz default tick rate. Remove the settings for ARC
hardware.
Note that the nsim board definitions are left at 100 Hz. That is a
software emulation environment that (like qemu) exposes the host clock
as "real" time and thus is subject to clock jitter due to host
scheduling.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The DT spec. only has "okay" and not "ok". The Linux kernel has around
12k "okay"s and 300 "ok"s.
The scripts/dts scripts only check for "disabled", so should be safe re.
those at least.
The replacement was done with
git ls-files | xargs sed -i 's/status\s*=\s*"ok"/status = "okay"/'
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Change code from using now deprecated DT_<COMPAT>_<INSTANCE>_<PROP>
defines to using DT_INST_<INSTANCE>_<COMPAT>_<PROP>.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert all board_set_xxer(foo) calls to board_set_xxer_ifndef(foo),
which allows the user to make their own decision at CMake time.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This helps by letting us add checks for when the runner has already
been set. There is documentation saying you can set
-DBOARD_DEBUG_RUNNER at the command line and have it take effect,
which turns out not to be true for a large number of boards.
A status message helps the user debug.
(We'll address the existing in-tree boards in the next patch.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
ARC EM4 is just a baseline configuration of ARC EM family of CPU cores.
But with addition of more featuers like caches, DSP extensions etc
we're effectively getting EM6, EM5D etc templates.
So to not confuse users let's talk about families of ARC cores
as that's what makes sense together with extra features but not
templates itself.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Update the files which contain no license information with the
'Apache-2.0' SPDX license identifier. Many source files in the tree are
missing licensing information, which makes it harder for compliance
tools to determine the correct license.
By default all files without license information are under the default
license of Zephyr, which is Apache version 2.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
As em7d is configured with HARVARD, CCM will be used not DDR,
SRAM should point to DCCM.
This bug will cause the wrong caculation of heap area,
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
* separate the ARC MPU driver into 2 parts
* arc_mpu_v2_internal.h for ARC MPUv2
* arc_mpu_v3_internal.h for ARC MPUv3
* For ARC MPUv2, keep the main design, but update and optimize the code
* For ARC MPUv3, implement mpu region split to supprt MPU region overlap
* misc updates and bug fixes
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
Maybe this is some "just in case" thing that got copied around. There's
no need to have a blank line at the beginning or end of Kconfig files.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A new role :zephyr_file: is available that renders to a link to the file
or folder in GitHub. Find appropriate references using :file: and
convert to :zephyr_file: to take advantage of its linking capability.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Be consistent in how board docs are named and move all to index.rst.
This will make the URL to the board documentation predictable and easier
to remember.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This was never a long-term solution, more of a gross hack
to get test cases working until we could figure out a good
end-to-end solution for memory domains that generated
appropriate linker sections. Now that we have this with
the app shared memory feature, and have converted all tests
to remove it, delete this feature.
To date all userspace APIs have been tagged as 'experimental'
which sidesteps deprecation policies.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Removed Console dependencies from shell uart backend.
Generated define: CONFIG_UART_SHELL_ON_DEV_NAME for each board.
Fixes#10191
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
There are different interrupt numbers for R22 v R23. Before this was
being handled via using Kconfig symbol CONFIG_BOARD_EM_STARTERKIT_R23 in
emsk_dt.h. Since we want to remove use of Kconfig in dts we handle this
via different dtsi files and having the proper one included by the
proper board revision dts file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Towards removing Kconfig from DTS we need to move setting of the sizes
of ICCM/DCCM into the SoC specific DTS files and out of emsk_dt.h
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This can help find unused symbols. Those end up without a type if
'default' is used instead of 'def_bool', which generates a warning.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
a longer explanation.
Keep the 'def_bool' for the following symbols, which seem to be
deliberately defined only in Kconfig.defconfig files:
- ALTERA_AVALON_I2C
- ALTERA_AVALON_MSGDMA
- ALTERA_AVALON_PIO
- ALTERA_AVALON_QSPI
- ALTERA_AVALON_SYSID
- CLOCK_CONTROL_IMX_CCM
- CPU_EM4_DMIPS
- CPU_EM4_FPUDA
- CPU_EM4_FPUS
- FP_FPU_DA
- I2C_GECKO
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Turning 'def_bool' in Kconfig.defconfig files into 'default' revealed
three unused symbols (confirmed with 'git grep'). Remove them.
Search for "Kconfig.defconfig" in
https://docs.zephyrproject.org/latest/application/kconfig-tips.html for
an explanation of how def_bool->default can reveal undefined symbols.
Removed unused symbols:
- SPI_DW_CLOCK_GATE
- PINMUX_MPS2
- BOARD_XTENSA
Also remove an assignment to the promptless symbol ALTERA_AVALON_SYSID,
in tests/boards/altera_max10/sysid/prj.conf. Assignments to promptless
symbols have no effect.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
These changes were obtained by running a script created by
Ulf Magnusson <Ulf.Magnusson@nordicsemi.no> for the following
specification:
1. Read the contents of all dts_fixup.h files in Zephyr
2. Check the left-hand side of the #define macros (i.e. the X in
#define X Y)
3. Check if that name is also the name of a Kconfig option
3.a If it is, then do nothing
3.b If it is not, then replace CONFIG_ with DT_ or add DT_ if it
has neither of these two prefixes
4. Replace the use of the changed #define in the code itself
(.c, .h, .ld)
Additionally, some tweaks had to be added to this script to catch some
of the macros used in the code in a parameterized form, e.g.:
- CONFIG_GPIO_STM32_GPIO##__SUFFIX##_BASE_ADDRESS
- CONFIG_UART_##idx##_TX_PIN
- I2C_SBCON_##_num##_BASE_ADDR
and to prevent adding DT_ prefix to the following symbols:
- FLASH_START
- FLASH_SIZE
- SRAM_START
- SRAM_SIZE
- _ROM_ADDR
- _ROM_SIZE
- _RAM_ADDR
- _RAM_SIZE
which are surprisingly also defined in some dts_fixup.h files.
Finally, some manual corrections had to be done as well:
- name##_IRQ -> DT_##name##_IRQ in uart_stm32.c
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
