This change adds DTS definition of SPI device for nRF chips.
It also removes SPI pin configuration from Kconfig and moves it to
chip DTS.
Signed-off-by: Filip Kubicz <filip.kubicz@nordicsemi.no>
Add RX API to LLDP. Caller should register callback which is called
from ethernet_recv().
Fixes#9407
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
The new "net ipv6" command which will print general IPv6 configuration
and information about autoconfigured IPv6 addresses.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_if_ipv6_prefix_get() function will return the proper prefix
for a given IPv6 address and network interface. This is used when
checking which source address should be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Refactor IPv6 address lifetime timer setting in net_if_addr to support
longer lifetime than 24 days.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
POSIX defines INET_ADDRSTRLEN and INET6_ADDRSTRLEN as max sizes of
textual form of IP addresses (including terminating NUL):
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/netinet_in.h.html
We already define INET6_ADDRSTRLEN, so it makes sense to define
INET_ADDRSTRLEN too.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Using sizeof() is a common best practice in C, because it allows to
adjust size in one place instead of many.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Fixed misspellings, Synopsis DesignWare references, move Synopsys nSIM
support to boards/SoC section.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This adds Central Address Resolution characteristic that is required
to check by peer if it's about to send directed advertisements where
initiator address is set to RPA.
Zephyr supports the Address Resolution, so the characteristic value
is hard-coded.
Please check Core 5.0 Vol 3 Part C 12.4 CENTRAL ADDRESS RESOLUTION
Related PTS test case: GAP/CONN/ACEP/BV-03-C
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
This ensures the core services are always registered first and the
gatt_sc work is initialized.
Fixes#9785
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The test for IS_ENABLED(BT_SETTINGS) in mod_reset()
should be IS_ENABLED(CONFIG_BT_SETTINGS).
Signed-off-by: David Leach <david.leach@nxp.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add additional test scenarios to validate signal event
APIs such as setting signal from ISR, setting/clearing
each unique flag and few negative test cases too.
Signed-off-by: Praful Swarnakar <praful.swarnakar@intel.com>
Introduce test to check that only the thread which locks the mutex
shall be able to release it.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The BT threads are interfering with the main thread priority selection
and the test fails semi-spuriously on NRF5x boards with "threads ran
too soon" (i.e. not an EDF failure per se, but the fact that the new
threads at K_LOWEST_APPLICATION_PRIO are running instead of the test
thread). This is a reasonable workaround for testing the
SCHED_DEADLINE ordering behavior, though.
Fixes#9843
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commits adds detailed description of Armv8-M features that
are introduced in the 1.13 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit includes the basic support for ARM TrustZone-M
in the list of key features for 1.13 release.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The latest mbedTLS (2.12) release increased resources requirements on
Zephyr, so it was required increasing the minimum SRAM to run this test
and the main stack size.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Since 2.9.0 release mbedTLS has some minor functional improvements,
security fixes and bug fixed. A list with all changes can be found
in:
./ext/lib/crypto/mbedtls/ChangeLog
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
While it's possible to define which mbedTLS config header to use, our
samples should use config-tls-generic.h as default because this header
is configurable through Kconfig.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Simple test for CONFIG_SCHED_DEADLINE. It creates a bunch of threads
at randome deadlines but within the same priority, and validates that
they run in the correct order.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The interval_us is supported by the adc_context code. It is not a
feature that the driver writer needs to code to support. Fixes
bug #9723.
Signed-off-by: Justin Watson <jwatson5@gmail.com>
This reverts commit 17e9d623b4.
Single thread keep introducing more issues, decided to remove the
feature completely and push any required changes for after 1.13.
See #9808
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 8dcd5f8c77.
Single thread keep introducing more issues, decided to remove the
feature completely and push any required changes for after 1.13.
See #9808
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
comparing int i with size_t size generates a sign-compare warning.
This commit solves the issue by giving i the type needed.
As older c standards do not allow to declare i after stack += 4 I
inserted the variable checked_stack that gets the type we need in the
comparison.
Signed-off-by: Alexander Polleti <metapsycholo@gmail.com>
Before dtc 1.4.7 we'd get something like the following for an interrupt
property in which #interrupt-cells is 2.
interrupts = <1 2 3 4>;
After dtc 1.4.7 we get:
interrupts = <1 2>, <3 4>;
We should handle both cases in the extract interrupt handling code. So
if we see a list of lists, we flatten it to a single list to normalize
the property.
Fixes: #9558
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
