To move forward and remove use of Kconfig in dts files lets just create
SoC specific dtsi files that the boards can include. This lets us
remove:
CONFIG_SOC_CC3220SF
CONFIG_SOC_MSP432P401R
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
As far as possible SoC-specific code should be contained to it's
directory and core systems should not be referencing specific
SoCs. This keeps the common code clean and makes it easier to maintain
out-of-tree SoCs.
To this end we move CONFIG_SOC_TI_LM3S6965_QEMU's soft-reset related
code out of arch/arm/core/cortex_m and into arch/arm/soc/ti_lm3s6965.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This test is intended to validate k_pipe_alloc_init()
and k_pipe_cleanup(), when CONFIG_USERSPACE is not defined.
Also added test to validate pending reader and pending writer
feature in pipe.
Signed-off-by: Ajay Kishore <ajay.kishore@intel.com>
Module refactored: splitted data into read-only part and control block,
adding macro for creating log_output instance
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Generate CONFIG_DT_COMPAT flags using available nodes
'compatible' property.
Store them in a bogus node_address key of defs dict so
duplicates could be removed.
Signed-off-by: Bobby Noelte <b0661n0e17e@gmail.com>
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Add 'generation: define' directive to 'compatible' property.
When existing for a type of device, move compatible property
description in device base structure (eg: i2c.yaml)
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This changed added notification complete callback which
gives information if a given notification has been sent.
Signed-off-by: Kamil Gawor <Kamil.Gawor@nordicsemi.no>
sockets_tls subsystem uses entropy driver, yet it does not include
entropy header. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Origin: Apache Mynewt NFFS
URL: https://github.com/apache/mynewt-nffs/tree/master
Commit: a2f679afe6323310ab1000385f41115df7da326e
Maintained-by: External
This patch introduce version which fixes following bug:
While inode is updated it is possible that Garbage Collection
is called which caused overwrite of inode's filename as the same
buffer was used to keep the filename and copping data in GC.
This patch uses buffer on the stack for keeping filename while inode
is updated which fix the issue.
The patch cause 128 B increase of stack consumption during inode
update the file name might be corrupted
Fixes#9749
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Contains defines enough to compile BSD Sockets subsystem. Values are
compatible with Newlib.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The implementation of this syscall can return either 0 or -ENOMEM, but
when USERSPACE is enabled and it is called through syscall it always
return 0.
Just change this syscall implementation to return the value of
_impl_k_stack_alloc_init
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
When checking availability of soc/${ARCH}/CMakeLists.txt,
we should use ${ZEPHYR_BASE} as path base.
Fixes#9956
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
menuconfig was being invoked without an initialized SOC_DIR, leading to
errors when parsing the top-level Kconfig.zephyr file.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Example of st_stm32 soc tree structure was instantiating
'stm32l0' dir as subdir of 'common' which is not the case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Added a new command, which can be used to test the directed advertising
API. This command allows user to turn on directed advertising in two
modes: low and high duty. High duty mode is the default one.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
Added implementation to the directed advertising API in the Connection
Management module. Introduced a new connection state for this type of
advertising. The new state is symmetric to the connection state used for
scanning.
Added a new advertising option that can be used to trigger low and high
duty directed advertising. Added macros for default values of
Advertising Parameters, which are used to trigger directed advertising.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
- Up to net_context to give the source port.
- net_udp_append is unused anywhere: let's remove it.
- left over macros on _raw versions removed as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The sensor driver Kconfigs are sourced inside an "if SENSOR..endif"
conditional, so it is redundant for sensor drivers to explicitly
"depends on SENSOR".
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
For each sensor driver, wrap all Kconfig symbols in a big if/endif
conditional rather than repeating "depends on" for each symbol.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Rather than do that for each architecture, source SoC Kconfigs where the
code is maintained, under ZEPHYR_BASE/soc.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move the SoC outside of the architecture tree and put them at the same
level as boards and architectures allowing both SoCs and boards to be
maintained outside the tree.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
MISRA-C requires that every switch clause has a break instruction.
Changing gen_kobject_list script to generates compliance code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
There is no reason why this sample should have a higher version required
of CMake in order to build.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
'find_program' should be used instead of 'set' for determining the
paths of host programs. It resolves#9582 and various other issues.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
In the BLE controller, NRF radio HAL, for the PPI registers used
for the SW TIFS.
To allow easier testing, replace direct use of registers
from Nordic's nrfx MDK with accesses via its HAL inlined functions
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
As per PTS, IUT is expected to return success for the
Range Get messages (Light Lightness Range Get for
MMDL/SR/LLNS/BI-01-C, Light CTL Temperature Range Get
for MMDL/SR/LCTLS/BI-01-C). This commit take care of
this issue.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Now if transition (instantaneous or non-instantaneous) is due
to delta level, then state binding would be as per it.
This is as per 3.3.2.2.3 of Bluetooth Mesh Model
Specification.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Corrected spelling mistakes for content of enum defined in
transition.h & renamed some functions. Corrected comments
in main.c
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
With this it is possible to get proper target value & remaining
time in status response from Servers when transition in progress.
If transition is not in progress then those things would not
get integrate into status response. This is as per Bluetooth
Mesh Model specification.
It is inspired concept from Bluetooth Mesh Developer study
Guide.
Also updated Transition Time (TT) related parameter calculation.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
