This test works both with native_posix and native_sim.
native_sim will eventually not set NATIVE_SIM_NATIVE_POSIX_COMPAT
(i.e. not pretend to be native_posix) so let's correct this ifdef
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Current clocks configuration for the platform makes it impossible
to pass the IDLE_EVENT_STATS_PRECISION check. This is to be addressed
in the future.
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
Cortex-R8 emulated in Renode doesn't trigger exceptions on divide by zero.
We only skip the virtual SoC, so the test will still apply on a physical
target.
Signed-off-by: Marek Slowinski <mslowinski@antmicro.com>
Signed-off-by: Mateusz Hołenko <mholenko@antmicro.com>
The unicast_stop function is changed to primarily do a
BAP disable instead of a release, with optional
support for releasing the streams once they have been disabled.
This also adds unittests for the procedure which also
allow us to remove the invalid param testing from the BSIM tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Updated overlay files to test using nocache.
and run outside of usersapce mode to avoid
inaccessible memory regions when using nocache on RT parts.
Also updated testcase file to reflect nocache testing.
Signed-off-by: Emilio Benavente <emilio.benavente@nxp.com>
Increasing the number of max tx segments to be able to fit composition
page 0 into composition data status message.
After the subnet bridge config client and server are added to the
tester, the size needed to report composition data page 0 increased.
Current behaviour of the tester is correct, dropping the element when
there is not enough space in data field, however the PTS application
does not handle the composition data status message without element.
Signed-off-by: alperen sener <alperen.sener@nordicsemi.no>
Fixes: #79052
The yaml CMake tests overwrites `message()` in order to verify correct
error handling. This was original done in a function and then using
a return call when an expected error has been raised.
Using a function() means the `return()` only returns the `message()`
and thus wrongly continue processing rest of the yaml file.
Change `message()` to macro so the return call correctly returns from
the calling yaml functions.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Make sure that CONFIG_ZVFS_OPEN_MAX in the tests and samples is at
least the same value as CONFIG_NET_SOCKETS_POLL_MAX so that we
cannot have more polled sockets than there are available file
descriptors.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
This region is only required if certain fast peripherals make use of such
region for DMAing. It was now enabled on all builds, often resulting in:
```
[134/134] Linking C executable zephyr/zephyr.elf
Memory region Used Size Region Size %age Used
FLASH: 24372 B 248 KB 9.60%
RAM: 4448 B 256 KB 1.70%
DMA_RAM21: 0 GB 16 KB 0.00% <~~ Not used!
DMA_RAM3x_APP: 40 B 4 KB 0.98%
IDT_LIST: 0 GB 32 KB 0.00%
```
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
- Exclude `app.overlay` from DTC_OVERLAY_FILES in
`drivers.gpio.build.adc_ads1145s0x_gpio` tests to avoid duplicate builds.
- Modified so that adc_ads1145s0x_gpio.overlay can be tested alone.
- Delete the conffile and move its contents to extra_configs.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
The following devices enable TRIGGER in a way that is different from the
template definition, so add these settings to sensos_no_default.conf.
- bosch,bmc150
- bosch,bmm150
- bosch,bmp150
- ti,ina230
- we,wsen-itds
- lm77
- st,lsm9ds0-gyro
- ti,tmag5170
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Since fc007eeef5 TLS sockets support
timeout based on CONFIG_NET_SOCKETS_CONNECT_TIMEOUT value. The TLS test
suite reduced this config value to speed up the tests, however it turns
out the 100ms timeout is too low to finalize the handshake on slower
platforms (nrf52840 specifically). Therefore increase the timeout value
to 200ms to prevent test failures on those.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
-add nucleo_u083rc and stm32u083c_dk overlays files
for testbench purpose.
- add platform_exclude property to skip test on boards
with little ram size.
Signed-off-by: Fabrice DJIATSA <fabrice.djiatsa-ext@st.com>
tests: drivers: adc: adc_api: update adc_api test
Added support for dynamic registration and unregistration of the
Broadcast Audio Scan Service (BASS) within the scan delegator.
This enables both scan delegator and BASS to be registered or
unregistered dynamically at runtime.
Signed-off-by: Babak Arisian <bbaa@demant.com>
Test did not support PPR core due to failing GRTC channel allocation.
This change fixes the channel allocation and enables PPR core test.
Signed-off-by: Bartosz Miller <bartosz.miller@nordicsemi.no>
As confirmable requests will stay allocated for (3 * ACK_TIMEOUT), we
need to adjust the timings so all requests are unallocated by the end
of the test.
Signed-off-by: Francois Gervais <francoisgervais@gmail.com>
This commit makes the device tree configuration decide
which link layer is compiled in. We do this to avoid
hard-to-understand linker errors referencing device tree nodes.
The following configuration creates a difficult to parse
linker error:
* BT_LL_CHOICE contains multiple entries, BT_LL_SW_SPLIT
is selected.
* Each BT_LL_CHOICE has its own unique device tree node with its
own "compatible".
* Only one of the link layer device tree nodes has status "okay",
but not the one corresponding to BT_LL_SW_SPLIT.
The linker error indicates that code using the HCI driver fails
to link with the controller. This because the HCI driver device
tree node references the link layer selected in devicetree which
is not compiled in.
By adding a dependendency to the device tree node, this can no longer
happen. Instead, if BT_LL_SW_SPLIT is now selected in a configuration
file, a Kconfig warning will be issued:
```
warning: The choice symbol BT_LL_SW_SPLIT
(defined at subsys/bluetooth/controller/Kconfig:129) was
selected (set =y), but BT_LL_SOFTDEVICE (defined at
/home/ruge/ncs/nrf/subsys/bluetooth/controller/Kconfig:11)
ended up as the choice selection.
```
This should be easier to understand than:
```
...(hci_core.c.obj):(.data.bt_dev+0x16c):
undefined reference to `__device_dts_ord_132'
```
After this commit we should consider getting rid of link layer
selection from Kconfig completely as the link layer is in practice
selected through device tree.
Unit tests have been updated to satisfy the dts dependency.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
Add support in this IPC backends for POSIX arch targets in general,
and ensure the nrf5340bsim defines the buffer which will be used.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Provide a new function for initializing the Rx side,
so users do not need to initialize the pointers by hand
if they did not use PBUF_DEFINE().
Let's also rename pbuf_init() to pbuf_tx_init() to clearly
signify the previous function was only meant to be used
by the Tx side.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Align all existing samples/tests/applications which
contains nrf54l15pdk/nrf54l15/* by adding
nrf54l15dk/nrf54l15/* to enable twister builds.
Signed-off-by: Katarzyna Giądła <katarzyna.giadla@nordicsemi.no>
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Evaluate CONFIG_LINKER_ITERABLE_SUBALIGN in CMake instead of in the
linker script.
It cannot be assumed that a linker generator implementation is
pre-processed and therefore Kconfig settings cannot be used in those
but must be evaluated in CMake.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Current folder name is set to "espressif_esp32" and
might not reflect all kinds of SoCs as such as esp8684.
Rename the folder to "espressif" only.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Add a new test to the simple llext test suite that verifies that DT
devices are properly exported to extensions. This is done by obtaining a
device handle from the DT and then trying to get the same handle at
runtime using the device_get_binding() API.
This test is optional because the current qemu_xtensa platform does not
have any usable DT devices to test with.
The LLEXT heap size is also increased to 64 kbytes to avoid heap
exhaustion when running the new test on mps2_an385.
Signed-off-by: Luca Burelli <l.burelli@arduino.cc>
Since the same test might be run in parallel on different platforms,
the one that it's started later will fail due to port re-use for
the OpenSSL server.
Since it's not really required to run the tests on native_sim and
native_sim/native/64, the latter is removed in order to solve this
problem.
Signed-off-by: Valerio Setti <vsetti@baylibre.com>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
native_posix is now deprecated.
Building these tests in both native_sim and native_posix does not
improve coverage for the tests or subsystem but doubles CI time.
As anyhow native_posix will be removed all together in
2 releases, let's remove it already for these.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
