The fuel_gauge_set_prop() function prototype declares a function that sets
multiple fuel gauge properties at once. The naming suggests it ought to
fetch a singular property at a time. Moreso, some clients may just want to
set properties one at a time and may feel uncomfortable using a prototype
for fetching multiple properties when wanting to fetch them one at a time.
Modify fuel_gauge_set_prop() to fetch a single property and add
fuel_gauge_set_props() to support fetching multiple properties. Modify
existing tests/drivers/samples.
This is part of #61818 work.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
The fuel_gauge_get_prop() function prototype declares a function that
retrieves multiple fuel gauge properties at once. The naming suggests it
ought to fetch a singular property at a time. Moreso, some clients may just
want to fetch properties one at a time and may feel uncomfortable using a
prototype for fetching multiple properties when wanting to fetch them one
at a time.
Modify fuel_gauge_get_prop() to fetch a single property and add
fuel_gauge_get_props() to support fetching multiple properties. Modify
existing tests/drivers/samples.
This is part of #61818 work.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Changes the Kconfig symbols for the sys_heap based memory management option
and removes the notion of `BLOCKS` with a more concise single
`LV_Z_MEM_POOL_SIZE` option. Also adds `LV_MEM_CUSTOM` to the lv_conf.h,
since in any option the memory management is considered to be custom.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Use the new Pytest integration to run testcases against Leshan.
Test with:
twister -T tests/net/lib/lwm2m/functional -p native_posix -vv
This requires Leshan running in localhost using following setup:
tcp/8080 Leshan web interface and REST API
tcp/8081 Leshan bootstrap server REST API
udp/5683 Leshan non-secure CoAP
udp/5684 Leshan DTLS CoAP
udp/5783 non-secure Bootstrap CoAP
udp/5684 DTLS Bootstrap CoAP
Leshan and Boostrap server must be reachable from native_posix
run using IP address 192.0.2.2 as in most of the examples.
Tests are written from test spec;
OMA Enabler Test Specification (Interoperability) for
Lightweight M2M
Following tests are implemented in this commit:
* LightweightM2M-1.1-int-0 – Client Initiated Bootstrap
* LightweightM2M-1.1-int-1 – Client Initiated Bootstrap Full (PSK)
* LightweightM2M-1.1-int-101 – Initial Registration
* LightweightM2M-1.1-int-102 – Registration Update
* LightweightM2M-1.1-int-104 – Registration Update Trigge
* LightweightM2M-1.1-int-105 - Discarded Register Update
* LightweightM2M-1.1-int-107 – Extending the lifetime of a registration
* LightweightM2M-1.1-int-108 – Turn on Queue Mode
* LightweightM2M-1.1-int-109 – Behavior in Queue Mode
* LightweightM2M-1.1-int-201 – Querying basic information in Plain Text
* LightweightM2M-1.1-int-203 – Querying basic information in TLV format
* LightweightM2M-1.1-int-204 – Querying basic information in JSON format
* LightweightM2M-1.1-int-205 – Setting basic information in Plain Text
* LightweightM2M-1.1-int-211 – Querying basic information in CBOR format
* LightweightM2M-1.1-int-212 – Setting basic information in CBOR format
* LightweightM2M-1.1-int-215 – Setting basic information in TLV format
* LightweightM2M-1.1-int-220 – Setting basic information in JSON format
* LightweightM2M-1.1-int-221 – Attempt to perform operations on Security
* LightweightM2M-1.1-int-401 – UDP Channel Security – PSK Mode
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Added a test case that generates a 160 MHz system clock
using a 16777216 Hz HSE clock and also using a 16 MHz HSI
Signed-off-by: Jatty Andriean <jandriea@outlook.com>
Add support for using the sub second registers. It allows reading and
setting alarm with the sub second tick resolution.
The RTC module is configured to get as high frequency as possible, which
equals the source clock (RTCCLK) divided by 2. To get such frequency,
the asynchronous prescaler is set to 1.
According to RM, setting the asynchronous prescaler to a high value
minimize consumption, so the change increase the power consumption.
Use a config to enable the sub second support.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Reduce the unnecessary hidding and indirection,
as it makes the scripts more difficult to follow
for no benefit.
If somebody wants to debug these tests, they'll want
to see the sim_id, and won't benefit from going around
opening files needlessly.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Introduce support for Texas Instruments TMAG5170
high-precision linear 3D Hall-effect SPI sensor.
This driver allows to configure measurements on
magnetic and temperature channels. It is also
possible to read rotation of the magnet.
Signed-off-by: Michal Morsisko <morsisko@gmail.com>
Adds initial support for hm330x dust sensor series. Allows to read PM1,
PM2.5 and PM10 concentrations in atmospheric environment. A further
update to the driver may add support for also reading "standard" CF1
concentrations by exposing of a custom sensor attribute or a Kconfig
option. Tested with Grove - Laser PM2.5 Sensor (HM3301) attached to a
Wio Terminal.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Fix the print format string so the "%" is printed
instead of a bogus value.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Fix regression in sw switch single timer id use for nRF53x
series SoC.
Regression introduced in commit cfcbe5d68e ("Bluetooth:
Controller: Remove redudant header file includes").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Update the code in the generic test to work with the updated sensor
decoder API that retrieves data vertically by channel.
Signed-off-by: Tristan Honscheid <honscheid@google.com>
Introduce PRI style formatting for DSP values. These require the use
of another separate macro to set up the argument (PRIq_arg).
Signed-off-by: Yuval Peress <peress@google.com>
This adds the cmsis-nn module since it moved to its own realm.
This also adds a kconfig for the long short-term memory.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
Use CMSIS-DSP from its new realm. This also changes change how you
initialize FFT tables as well to use arm_cfft_init_64_f32 if you
know the FFT size in advance rather than the generic initialization
arm_cfft_init_f32.
Signed-off-by: Ryan McClelland <ryanmcclelland@meta.com>
This board seems to have issue with data alignemnt after 843f66f and is
failing in CI. Exclude it while the problem is investigated.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
