Add Models Metadata Page 128 support to tester.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This allows to advertise beacons with Private Node Identity on demand,
like was available for regular Node Identity.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
- Add entry for client and server in composition data.
- Add Client commands to aggregate and send messages.
MESH/SR/AGG/BV-02-C requires more key slots.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Adding support for automatic testing BLOB, DFU and DFD models.
Co-authored-by: Agata Ponitka <agata.ponitka@codecoup.pl>
Co-authored-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
This enables Remote Provisioning in tester application. Adds basic
setup and required structures/functions.
add BTP API for Remote Provisioning Client
This adds BTP commands for RPR Client API.
Signed-off-by: Krzysztof Kopyściński <krzysztof.kopyscinski@codecoup.pl>
- Adds Large Comp Data Server and Client
- Defines some dummy metadata for Health Server
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Some test cases require more control over transmission parameters used
when sending access messages.
Signed-off-by: Michal Narajowski <michal.narajowski@codecoup.pl>
Removed the tests for invalid bt_bap_broadcast_source_reconfigure
parameters and state, as those tests now implemented as unit tests.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Add a simple central and peripheral CIS test that
exercises the ISO host API for unicast ISO (CIS).
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This sample is an alternative implementation of hci_uart. The new sample
differs from the existing sample in that it uses the async UART API
instead of the interrupt driven API.
Included in this commit is a new test for HCI UART flow control. It's
enabled for hci_uart_async. The test can excercise also the existing
hci_uart sample (with some minimal changes to allow compiling in the
mock controller and test suite). The existing hci_uart sample currently
fails the flow control test.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Add tests for the DHCPv6 library. The tests verify that:
* message format is valid for the outgoing messages
* incoming messages are only processed in respective states
* processing through standard DHCPv6 transactions is correct
(Solicit/Confirm/Renew/Rebind)
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Previous commit reverted the `link_encrypted` filed of CCC config.
Update the test to match the new expected behavior.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
Test that SC Indication is correctly sent when the client reconnect and
the server updated the GATT database since last connection. Test that
the indication is sent even if the bond is not restored.
Signed-off-by: Théo Battrel <theo.battrel@nordicsemi.no>
This patch shows an example of how to use the timer behavior external
tool testing, using the Saleae Logic 2 application.
Also, some board overlays were added as examples.
Finally, testcase.yaml updated with parameters for the Saleae sample.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
This patch adds a way to simplify using an external tool to measure
timer behaviour on Zephyr. It modifies the timer behaviour
jitter_drift.c tests to toggle a GPIO pin (defined via a new DTS
compatible, "test-kernel-timer-behavior-external") that can be connected
to an external tool, such as a logic analyzer, to measure timer
behaviour.
This GPIO pin toggle is behind a new CONFIG_TIMER_EXTERNAL_TEST Kconfig.
A new pytest test is added so that it can collect the statistics from
the external tool and assert some measurements. To collect statistics
from the external tool, one needs to provide a Python module which
provides a `run(seconds, config)` method, that will perform the test and
return the statistics. Check the README file for more information about
this interface.
Finally, this on twister, this new test is behind a new fixture,
"gpio-timerout".
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Signed-off-by: Tom Burdick <thomas.burdick@intel.com>
Adds a test for the data sharing retention feature of MCUboot
configuration to an application.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Replaces the previous approach to define bands via hardware capabilities
by the standard conforming concept of channel pages.
In the short term this allows us to correctly calculate the PHY specific
symbol rate and several parameters that directly depend from the symbol
rate and were previously not being correctly calculated for some of the
drivers whose channel pages could not be represented previously:
* We now support sub-nanosecond precision symbol rates for UWB. Rounding
errors are being minimized by switching from a divide-then-multiply
approach to a multiply-then-divide approach.
* UWB HRP: symbol rate depends on channel page specific preamble symbol
rate which again requires the pulse repetition value to be known
* Several MAC timings are being corrected based on the now correctly
calculated symbol rates, namely aTurnaroundTime, aUnitBackoffPeriod,
aBaseSuperframeDuration.
In the long term, this change unlocks such highly promising functional
areas as UWB ranging and SUN-PHY channel hopping in the SubG area (plus
of course any other PHY specific feature).
Signed-off-by: Florian Grandel <fgrandel@code-for-humans.de>
903a79431a
seems to have attempted to limit in how
many platforms this test runs due to issues in some
platforms. But how it was done (using platform allow apart
from integration platform) it prevents it running on
other platforms in which it works.
Add the nrf52_bsim target to this allow list so the
test can be run on it too.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Mesh1d1 uses EHP wth SHA256 algorithm as the main one.
This mandates to use 32 bytes static oob if static oob
has been chosen.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Add BT_CTLR_EVENT_OVERHEAD_RESERVE_MAX Kconfig to allow the
omit of EVENT_OVERHEAD_START_US and EVENT_OVERHEAD_END_US in
the time reservation calculations.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added retry mechanic to CSIP notifications by adding them into system
workqueue. Bookkeeping is done for notifications for all clients, and
potentially disconncted clients will also receive notifications on
reconnect. This also adds mechanic to restore the local clients list
upon registration of the service, as well as BSIMs to test notify on
reconnect.
Signed-off-by: Fredrik Danebjer <frdn@demant.com>
lwm2m_udp_receive() is only called with same function
pointer, so there no need to carry that in the parameter.
Signed-off-by: Seppo Takalo <seppo.takalo@nordicsemi.no>
Added application based on SMP Server Sample. Application is built together
with MCUboot using sysbuild and is flashed onto device in one step.
Tests are automated with pytest - new harness of Twister.
The image for upgrade is prepared using west sign command
then is uploaded by mcumgr into device and tested.
Automated scenarios to test upgrade (image upload, test, revert, confirm),
to test downgrade prevention mechanism and to test upgrade with image,
that is signed with an invalid key.
Signed-off-by: Grzegorz Chwierut <grzegorz.chwierut@nordicsemi.no>
Based on review of the similar charger driver API, it's been demonstrated
from the community that embedding a per value property type when fetching
properties. Separating off the property types from the property values
themselves also allow an array of property types to declared as static
const.
Break up fuel_gauge_property struct into a fuel_gauge_prop_val union and a
fuel_gauge_prop_t property type as inputs into fuel gauge API functions.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
Based on review of the similar charger driver API, it's been demonstrated
from the community that embedding a per value status code when fetching
multiple properties isn't particularly wanted or needed. It was largely
considered not worth the additional maintenance to have the extra per
property error information.
Remove the status field from the fuel_gauge property value structs.
Signed-off-by: Aaron Massey <aaronmassey@google.com>
