This allows to do directed advertising with peer address set to RPA.
To do this according to specification IUT must first read Central
Address Resolution characteristic to check if peer supports it.
This is affecting GAP/CONN/DCON/BV-05-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Move the header file csis.h from the internal location to
the public include directory. This file is supposed to provide
the public API for CSIS and the CSIS client, but is not fully
complete yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the coordinated set identification service (CSIS) client.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the coordinated set identification service (CSIS) server.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The mesh shell module owns the composition data for the shell
application, which makes it impossible to use it outside of the
application itself. To support the shell as a generic debugging
component that can be added to any application, we have moved the
composition data out of shell.c, and into the application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
As the already existing macro K_MEM_SLAB_DEFINE results in
two variable definitions, the preceding static modifier leads to
a seemingly working solution, though linkage conflicts will occur
when the same memory slab name is used across multiple modules.
The new K_MEM_SLAB_DEFINE_STATIC macro duplicates the functionality of
K_MEM_SLAB_DEFINE with the difference that the static keywords are
internally prepended before both variable definitions.
The implementation has been tested on my Zephyr project (the build
issue faded out). The documentation has been updated altogether
with all incorrect occurences of static K_MEM_SLAB_DEFINE.
Signed-off-by: Pavel Hübner <pavel.hubner@hardwario.com>
Add iterations of connections and disconnections to
Babblesim test of Bluetooth Low Energy Central role
functionality by scanning for other devices and establishing
connection to upto 62 peripherals with a strong enough
signal.
Enable Auto PHY Update and Auto Data Length Update procedure
in the central_multilink sample.
Enable Auto PHY Update and Auto Data Length Update procedure
in the peripheral_identity sample. Fixed issues related to
rotation of identities after maximum number of connection
iterations are repeated.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add mixed Legacy Directed Advertising and Extended Advertising
test in the babblesim coverage for Extended Advertising
feature.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
bt_conn_unref() requires valid conn pointer but could be called with
NULL in case valid connection was not found in disconnect_eatt_chans().
Fixes#39851
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Migrating the test suites to the register functionality allows the
main.c source to focus on the state of the system instead of "which"
test to run. In this example, test_main() now calls:
* ut_bt_setup() and updates the state
* common_create_adv_set(), updates the state, and notifies the
registered tests that the state has been updated which would trigger
a run.
* common_delete_adv_set(), updates the state, and again notifies
the registered tests that the state has been updated.
Signed-off-by: Yuval Peress <peress@chromium.org>
This allows to track security levels and check for lost bond of peer
peripherals.
This was affecting GAP/SEC/AUT/BV-21-C qualification test.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Move the LE audio configuration to a new audio.conf file
in the bluetooth shell project, similar to the mesh.conf
file.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This allows for better control over IUT behaviour by Upper Tester.
PTS and TS require inconsistent behaviour in terms of how IUT should
return credits. Some tests require return on explicit UT request and
some require that IUT returns credits autonomously.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
PR adds testing of subscription of the tree of extended models.
Extended models should share subscription list among them.
Signed-off-by: Aleksandr Khromykh <Aleksandr.Khromykh@nordicsemi.no>
The receiver and transmitter in the test are synchronized by
use of sleep functions. The change in handling of periodic
advertising synchronized event caused missmach in waiting
times. Receiver is notified about established synchronization
later that it was in the past. Due to that the wait for end
of transmitter operation was too long.
Temporary fix for the problem is decrease of receiver sleep
time by one periodic advertising interval.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In test cases MESH/NODE/TNPT/BV-04-C and MESH/NODE/TNPT/BI-01-C
the PTS is sending incomplete Seg Ack 3 times and in some cases we run
out of retransmit attempts before PTS sends complete Seg Ack. As a
workaround, increase Segment Retransmit Count to improve stability of
these tests.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
In some scenarios when there is a need for multiple re-transmissions of
segmented messages the default value of 2 seconds may be not enough.
In my experience this improves stability of Configuration Client tests
involving multiple PTS instances.
Signed-off-by: Michał Narajowski <michal.narajowski@codecoup.pl>
Remove explicit disable of Channel Selection Algorithm #2
in the mesh tests that use Extended Advertising.
Fixes#39188.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This allows UT to reconfigure MTU of a channel and get notfied when
channel configuration changed.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Implement support for Periodic Advertiser List to be used
in LE Periodic Advertising Create Sync command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add unit tests that will ensure the CTE disable operation does not
cause breaking of LLL operations by too early release of chained PDUs.
The tests verify if numbers of PDUs in free PDUs fifo and free PDUs
memory pool are correct.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Use separate DUT and TST builds in EDTT HCI tests so that
the tester can send Data Length Requests with txOctets and
maxTxTime as required by the test specification. TST build
has HCI parameter checks disabled.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
PR includes test that combines and checks OOB public key
provisioning with all possible OOB authentications
and OOB public key provisioning without auithentication.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
BubbleSim tests that check provisioning with all possible (from spec)
OOB authentications
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
bsim test build system hides compile warnings.
This commit adds extra cc flags to prevent this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Replace the old whitelist-related terms with the new filter accept list
one from the Bluetooth spec v5.3.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For ECFC L2CAP test we user overlay with disabled EATT and
bt_eatt_disconnect_one() is available only with EATT enabled.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The Bluetooth Core Specification, version 5.3, has introduced multiple
changes to several widely-used terms in order to make them inclusive.
Update the public API to reflect this, excluding hci.h, which will be
done in a subsequent commit.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
