Provides interface, data structures and demuxing capability for ISO RX
PDU allocation and transport from LLL to HCI.
Uses the RXFIFO composite for simplicity and reduced overhead.
Signed-off-by: Morten Priess <mtpr@oticon.com>
The host reassembles fragmented advertising reports from the controller.
Non-complete advertising reports from different advertisers may not be
interleaved. If non-complete advertising reports from an advertiser
is received while advertising reports from another advertiser is
reassembled, an error message is logged and the advertising report is
discarded. Future scan results may be incomplete.
Advertising reports from legacy PDUs or complete extended advertising
reports may be interleaved as these do not require reassembly.
If the controller sends more advertising data than fits in the
reassembly buffer, the data is truncated. Further advertising reports
from the advertiser are discarded until the final complete advertising
report is received and discarded.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
There were changes done to controller code that cause
tests to do not build and fail during execution.
Changes are related with:
- modified code related with extended advertising ADI
field handling
- added generic double buffer data structure that is
used in controller
- moved code that was building only when DF is enabled
- added EVENTS_PHYEND that is not available in nrfbsim
board
The PR addresses those issues.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
In connected mode when Receiving Constant Tone Extensions feature
is enabled, controller shall be able to receive CTE in any
data channel packet.
The commit adds required changes to allow receive of CTE for
all data channel packets in peripheral role.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Test scripts should be executable.
The regression system will work around it by making them executable
if they are not, but that causes changes to the local tree.
Fix it instead so people doesn't get local changes when running regression.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Different tests should use different simulation ids so they don't
collide with each other at random when run in parallel.
Fix it.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
bsim test build system hides compile warnings.
The problem had been fixed before but due to a regression came again.
This commit adds extra cc flags to prevent this.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Updated the ISO BabbleSim test to use Periodic Sync Receive
enable command to disable Periodic Sync reports and yet
receive the BIGInfo report.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit adds 3 tests that check:
- Publish period state
- Publish retransmit count and interval steps states
- Canceling periodic publication and publication retransmission
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Bsim devices work asynchronously before access to Phy.
Interprocess OOB communication might be broken because of this.
PR adds synchronization for devices. Drift is 100ms between them.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Update the testnames according to the Bluetooth 5.3 specification
for inclusive naming
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
There is a common implementation of connection handling code
that may be shared by tests: connection_cte_req and connection_cte-
tx_params.
This commit removes code implemented in common.c and common.h
files. The same code is currently available in ../df/common/
directory.
All calls were updated to use function from common implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Add unit tests for HCI command HCI_LE_Set_Connection_CTE_-
Transmit_Parameters.
Part of a code that was available in df/connection_cte_req/common.c,
related with artificial handling of connection, is moved to
df/common/bt_conn_common.c.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
This commit adds 3 tests that check:
- Publish period state
- Publish retransmit count and interval steps states
- Canceling periodic publication and publication retransmission
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Increase the L2CAP buffer count, for the media control shell to work.
(The buffer count was set to an even higher value in the
topic-le-audio branch, but that setting was not upmerged.)
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
The le-audio host shell enables extended advertising. Therefore, for
the shell to be usable, extended and periodic advertising must also be
enabled for the controller.
The controller configuration are added to board-specific files for the
time being, as the advertising features are still experimental
upstream.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Update the configuration file to use BT_FILTER_ACCEPT_LIST
instead of the deprecated BT_WHITELIST.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The define for PDU_AC_LL_SIZE_EXTRA was removed in main, but not in
the topic-branch. The merge of topic/branch erroneously reintroduced
this define, so it needs to be removed
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
HCI tests HCI/DSU/BV-05-C and HCI/GEV/BV-01-C fail when
compiling with debug optimisations turned on.
Therefor revert to not compiling with debug optimisations.
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Update the macro prototype to explicitly require the length of the
desired user data. Update all in-tree usage of this macro.
Signed-off-by: Jordan Yates <jordan.yates@data61.csiro.au>
Adds preprocessor ifdefs to reconfigure() in L2CAP tester application
depending on the KConfig option CONFIG_BT_L2CAP_ECRED
Fixes issue #40456
Signed-off-by: Johan Lundin <johan.lundin@nordicsemi.no>
For consistency we run the gatt and gap tests also with the new
LLCP. The test lists for legacy and new LLCP are identical
and therefor no separate test lists have been introduced
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Rename the mockup file from ull_periph.c into ull_peripheral.c
so that it has the same name as its equivalent in the BT
controller
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
If IUT is acting as a central device and peer lost bond we need
to re-pair to restore bond. PTS is not sending any WID for this
so bonding needs to be initiated implicitly by IUT.
This was affecting GAP/SEC/AUT/BV-25-C qualification test case.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
Use the host BIG Sync APIs to test the BIG Sync establish
and Sync Terminate implementation in the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix the bsim test_iso application so as to sync with periodic
adveritising. Increase the timeout so that the test passes.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Construction of BIGInfo with mandatory parameters and
placing it in the ACAD of Periodic Advertising PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added tests to check Broadcast ISO allocations are released
on terminate, and new Broadcast ISO create is successful.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Remove option CONFIG_USB_UART_CONSOLE where it has no influence
or enable CONFIG_SHELL_BACKEND_SERIAL_CHECK_DTR without taking
a detour through CONFIG_USB_UART_CONSOLE.
Check the compatibility of chosen property instead
of usage of CONFIG_USB_UART_CONSOLE option.
Align how to wait for the readiness of CDC ACM UART.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Pushes all work done in the topic-ble-llcp branch into main branch
This is a refactoring of the LL control procedures; the refactored
control procedures are hidden behind a KConfig option and
per default disabled
Goal of the refactoring:
close issue Link Layer Control Procedure overhaul #15256
make it easier to add/update control procedures
Refactoring consists in principal of writing explicit state machines
for the control procedures.
To reduce the risk of regression errors unit-tests have been added
Following control procedures are implemented:
Connection update procedure
Channel map update procedure
Encryption procedure
Feature exchange procedure
Version exchange procedure
ACL termination procedure
Connection parameters request procedure
LE Ping procedure
Data Length Update procedure
PHY update procedure
Min. nr. Of channels used procedure
Constant Tone extension request procedure
This is a joined work by the people listed in the signed-off-by
list (in alphabetical order)
Signed-off-by: Andries Kruithof Andries.Kruithof@nordicsemi.no
Signed-off-by: Erik Brockhoff erbr@oticon.com
Signed-off-by: Piotr Pryga piotr.pryga@nordicsemi.no
Signed-off-by: Szymon Janc szymon.janc@codecoup.pl
Signed-off-by: Thomas Ebert Hansen thoh@oticon.com
Signed-off-by: Tommie Skriver tosk@demant.com
Signed-off-by: Andries Kruithof <Andries.Kruithof@nordicsemi.no>
Enable ISO (unicast and broadcast) for the BT shell.
This allows users to use the ISO features (if supported by
the controller) in the shell.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds support for reading multiple variable length characteristics.
Previously read_multiple() always set the variable flag to false.
This is used by GATT/CL/GAT/BV-03-C.
Signed-off-by: Herman Berget <herman.berget@nordicsemi.no>
A FEM in this case is an external Front-End Module. This is basically
a range booster with some extra amplification in the TX and RX paths.
This feature is supported for the Nordic open source controller. See
the changes to the ubx_bmd345eval_nrf52840 board for a quick summary
of what you have to do to take advantage of this.
(This patch doesn't actually remove the feature in the openisa HAL,
though, because that never implemented the required GPIO handling
routines.)
We are using the 'fem' property previously added to the
nordic,nrf-radio's devicetree binding, which points to the FEM that is
in use. If you have this property and the node it points to is
enabled, the controller subsystem respects it. Otherwise, FEM support
is disabled.
This obsoletes the following Kconfig options, which are now unused:
- CONFIG_BT_CTLR_GPIO_PA
- CONFIG_BT_CTLR_GPIO_PA_PIN
- CONFIG_BT_CTLR_GPIO_PA_POL_INV
- CONFIG_BT_CTLR_GPIO_PA_OFFSET
- CONFIG_BT_CTLR_GPIO_LNA
- CONFIG_BT_CTLR_GPIO_LNA_PIN
- CONFIG_BT_CTLR_GPIO_LNA_POL_INV
- CONFIG_BT_CTLR_GPIO_LNA_OFFSET
- CONFIG_BT_CTLR_FEM_NRF21540
- CONFIG_BT_CTLR_GPIO_PDN_PIN
- CONFIG_BT_CTLR_GPIO_PDN_POL_INV
- CONFIG_BT_CTLR_GPIO_CSN_PIN
- CONFIG_BT_CTLR_GPIO_CSN_POL_INV
- CONFIG_BT_CTLR_GPIO_PDN_CSN_OFFSET
The PA and LNA pins are now specified via fem-specific devicetree
properties in the FEM node:
- The "generic" PA/LNA case is handled with the ctx-gpios and
crx-gpios properties of the generic-fem-two-ctrl-pins compatible,
respectively.
- If the fem is an nRF21540, use the tx-en-gpios and rx-en-gpios
properties instead (and also respectively). This allows us to specify
FEM properties in a way that makes sense for the hardware datasheet,
while still handling them in a uniform way within the controller.
We support this in the nRF5 HAL with a new radio_nrf5_fem.h
sub-header, which pulls in radio_nrf5_fem_generic.h or
radio_nrf5_fem_nrf21540.h depending on the fem node's compatible, if
one is defined. These in turn let us replace the implementation
routines in radio.c with DT equivalents.
Keep in-tree users and devicetree binding documentation up to date.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Recently there was added ADI support to periodic advertising.
There was missing implementation of ADI for periodic advertising
chained PDUs and direction finding. Also unit tests for periodic
advertising chains required update to handle ADI field.
The commit provides missing implementation.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This commit add the BabbleSim tests for the media control client, the
media control service and the media proxy. This is a part of the
upmerge of the le-audio media control files.
These tests have been developed and maintained along with the media
control functionality. The tests are believed to cover all
implemented media control functionality.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the exception that some include paths have
been modified to correspond to new locations of files and that the
tests have been guarded with ifdefs.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
test guards
Add entries for media control builds to testcase list. This is a part
of the upmerge of media control from the topic-le-audio branch.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Upmerge of the project settings for media control from the
topic-le-audio branch.
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
audio.conf changes
