Zephyr's DHCPv4 server does not implement persistent storage of address
leases. In result, all leases are lost on reboot, which can cause
delays with clients starting in INIT-REBOOT state and thus sending
(potentially several) Requests before attempting full Discover-Request
procedure.
Add option to override RFC defined behavior, which states that if we
don't recognize the client sending the Request, the server shall remain
silent. Enabling that option allows the server to send NAK reply in case
client is not recognized, informing the client it should proceed with
full procedure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
RFC6842 updated RFC2131 in terms of including client ID option in
responses sent from the server. According to that RFC, the server MUST
include the client ID option in Offer/Ack/Nak replies, if it was
provided by the client.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case ACK from the server was lost, we'd not reply Request
retransmissions, as the lease state is already in allocated state on the
server side. Therefore we also need to allow to reply with ACK in such
case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
5 seconds turned out to be too short timeout in case retransmissions
kicked in at DHCP level, hence increase the timeout.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add message types for line coding and contol line state updates.
Add a publish message function that takes a pointer to a device
structure as payload, and use USB notification in the CDC ACM
implementation.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
The implementation uses the system workqueue and a callback provided
and registered by the application. The application callback is called in
the context of the workqueue. Notification messages are stored in a
queue and delivered to the callback in sequence.
We cannot call application callback directly from the USB device stack
thread because the behavior of arbitrary code provided by the
application is unpredictable, and we do not want it to be executed in
the same context where all events from the device controller are
handled.
Nor can we use the ZBUS subsystem directly. ZBUS offloads responsibility
for defined behavior to the observers and application, and does not
provide any way for the publisher to enforce defined behavior and
execution context.
ZBUS listener would be called from the USB thread context and is not
acceptable. ZBUS subscriber does not provide delivery guarantee and
cached message can be overwritten. ZBUS message subscriber has
cumbersome global configuration and buffers that are too complicated to
handle from USB configuration, and even if we would use it, defined
behavior is not possible because of how listener and subscriber are
handled.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Debugging IPv6 Neighbor Discovery issues requires to enable full IPv6
logs, which can get bloated given it provides logs for every single
packet. We should be able to focus on IPv6 ND logs only, hence introduce
a separate log module for IPv6 ND.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Recently (during Bluetooth UPF), a lot of developers experience
confusion due to weird errors in SMP, etc, which are actually irrelevant
and caused by the connection never having existed.
As a stop-gap measure, until upper layers properly report lower layer
failures, add a warning in the logs to stop wasting developer time.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Since the cap_common.c rely on CONFIG_BT_MAX_CONN, and is
only used for connected procedures, it should be guarded
by CONFIG_BT_CAP_INITIATOR_UNICAST instead of
CONFIG_BT_CAP_INITIATOR
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Increase the timeouts to be 60 instead of 6.
The reason for this is that some controllers (like the Zephyr
controller) will reserve some of these to ensure stability,
and in fact with skip = 5 and retry = 6, it would still
send the PA reports at every interval.
To accomodate a higher timeout value, the functions used to
convert PA intervals to PA timeouts have been updated.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Added the CONFIG_MCUMGR_TRANSPORT_BT_DYNAMIC_SVC_REGISTRATION Kconfig
option to manage how the SMP service should be registered.
By default the SMP service must be registered at runtime.
If this Kconfig option is disabled, the SMP service is statically
defined and registered.
This change allows to opt out of using the CONFIG_BT_GATT_DYNAMIC_DB
Kconfig option and as a result, lower the memory usage.
Signed-off-by: Mateusz Kapala <mateusz.kapala@nordicsemi.no>
Linkable loadable extensions can only use syscalls if they are exported
via EXPORT_SYSCALL (or EXPORT_SYMBOL). Instead of enabling used syscalls
one by one, this patch exports all of them automatically via
`gen_syscalls.py`. If CONFIG_LLEXT=n, the section where the exported
symbols live is discarded, so it should be a non-op when llext is not
enabled.
This patch also removes the now redundant EXPORT_SYSCALL macro. Note
that EXPORT_SYMBOL is still useful on different situations (and is
indeed used by the code generated by `gen_syscalls.py`).
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
Sets the retries in cmd struct to their Kconfig value. This fixes
an issue in imx_usdhc.c where retries would be used uninitialized. That
leads to a loop not being entered and subsequently no data being read
from the controller.
Tested on mimxrt1170_evk.
Signed-off-by: Jakob Genßler <jakob.genssler@gin.de>
As we are replacing native_posix with native_sim, let's
refer to native_sim instead of native_posix in the comments.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
There is no need to validate stream_param->data if it is NULL.
Fixes failing PTS BAP/BSRC test cases.
Signed-off-by: Magdalena Kasenberg <magdalena.kasenberg@codecoup.pl>
When the policy returns NULL pm_system_suspend was assuming that
the current state in z_cpus_pm_state was ACTIVE, since that is the
state set after the core wakes and return to this function. The
problem is that in cases where the cpu does not preserve the context,
and returns to this function, z_cpus_pm_state has the value of the
last state used and the cpu use it again.
Fix it setting z_cpus_pm_state to ACTIVE every time the policy returns
NULL.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The function inteval_timeout() was missing "r", the function
should be called interval_timeout()
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Tracing with sysview is missing both
sys_port_trace_k_thread_abort_enter()/_exit() which exist on
other tracing backends. So add them.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
As per current definition of the Z_TEST macro, defined in
include/zephyr/ztest_test_new.h, the passed parameter is named
'fixture', not 'this'.
Signed-off-by: Reto Schneider <reto.schneider@husqvarnagroup.com>
Rename the internal input callback structure to input_callback. This is
for coherency with "INPUT_CALLBACK_DEFINE" and other similar code paths
in Zephyr, and also to avoid confusion with terminology.
This is an internal structure, applications should not have any
references to it so there should be no need for any release note
entries.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Remove SCO security management code block.
Currently, security related checks are not
necessary. It can be added if needed.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Call bt_sco_server_register to register SCO
server. Manage the SCO connection request.
Get SCO connect/disconnect status via SCO
channel ops.
Notify the uppper layer of the SCO connection
status changes through bt_hfp_hf_cb::
sco_connected and bt_hfp_hf_cb::
sco_disconnected.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Currently, SCO connections and disconnections
are agnostic to upper-layer.
Add two functions, bt_sco_connected and
bt_sco_disconnected, to notify the SCO
connect changes.
For Central side, pass "struct bt_sco_chan"
object when calling bt_conn_create_sco. it
uses to manage the SCO channel for upper-
layer.
For Peripheral side, two functions
bt_sco_server_register and
bt_sco_server_unregister are added to monitor
SCO connection request for upper-layer. The
upper-layer could accept or reject SCO connect
When the connection request received. If the
connect is accepted, the "struct bt_sco_chan"
object could be passed by "sco_server->accept".
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
The codecs used for the bap bt_bap_stream_config was only
valid for the lifetime of the procedure, which meant
that by the end of the procedure the stream->codec_cfg
became invalid.
This is fixed by using the pointer provided to the
CAP API, and documentating the lifetime of the codec_cfg.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
IGMP queries sent out by a proxy querier can have
a source IP address 0.0.0.0
Allow these incoming packets.
Fixes#69917
Signed-off-by: Savin Weeraratne <savin.weeraratne@audinate.com>
When we receive Router Advertisement with life time,
we will add this as default router, like typing command "net iface"
and has show below
IPv6 default router :
fe80:xxxx::xxxx
When this default router is backend A and
we ping backend B with link local address,
we will use default router A and send echo request
to backend A instead of B, which will receive Redirect and no reply.
Fix it by link local address does not check route.
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
When calling `mesh prov beacon-listen on` shell command before
provisioning the local device, the stack won't report unprovisioned
beacons. This is because the scanner has not been started yet. This
behavior confuses users. Print a warning that the device needs to be
provisioned first before it can listen to unprovisioned beacons.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
In the simulated bsim boards there is no jittery delay
from a (D)PPI event until a TIMER starts.
The timer starts instantaneously so we do not need to
compensate for it.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The building error is reported in Ubuntu if
CONFIG_NET_BUF_LOG is true.
Change __line__ to __LINE__ to fix building
error.
Signed-off-by: Lyle Zhu <lyle.zhu@nxp.com>
Use the HAL always when setting the TIMERs CC registers,
(also for coded Phy) to ensure things work properly for simulation.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add HCI input parameter validation according to spec for passing
qualification tests.
- Conditional compile of LE Set PA Receive Enable feature
- Store BIGinfo encryption state and number of streams
- Do not report BIGinfo if phy is invalid or unsupported
- Return disallowed ll_read_iso_tx_sync uses sync recever handle
- Validate BIS indices in ll_big_sync_create
Signed-off-by: Morten Priess <mtpr@oticon.com>
Debug logs in helper functions like tcp_unsent_len() or
tcp_window_full() are not very helpful and generate a heavy, unnecessary
log output. Therefore, tcp_unsent_len() will no longer generate log, and
tcp_window_full() will print out a log only when the window is actually
full, which could be an useful information.
Also, reduce the log load during TX, as currently redundant logs were
printed in tcp_out_ext(), tcp_send_process_no_lock() and finally in
tcp_send().
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
If send the igmp packet when lower interface is down, the packet will be
freed twice and show error log. Remove the net_pkt_unref in igmp_send(),
and let the caller free it.
Signed-off-by: Maochen Wang <maochen.wang@nxp.com>
Zperf upload multicast always use default interface.
Zperf download multicast cannot receive packets from other than
224.0.0.1 which is default multicast group.
Add zperf upload/download option -I <interface name> for multicast.
So that user can select interface for multicast.
Add join multicast group for zperf download.
Use the "device list" command to get the interface name as
follows:
"- ua (READY)" #uAP interface name
"- ml (READY)" #STA interface name
Multicast traffic commands:
zperf udp upload -a -I ua 224.0.0.2 5001 10 1470 1M
zperf udp download -I ua 5001 224.0.0.3
Signed-off-by: Fengming Ye <frank.ye@nxp.com>
Fix compilation warning due to taking member from a packed structure
and assigning it to a pointer. Compiler warns that it may be
unaligned. However, it is ensured that it will be aligned by
operations preceding this assignment.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
A lot of the log messages are using highest level, optimize
them to recycle as much messages as possible.
When building the sample with `CONFIG_HAWKBIT_LOG_LEVEL_DBG`
on `frdm_k64f`, the FLASH size is reduced from 150860 B to
150048 B, saving ~800 bytes.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
