Logging shall not use character pointers with %p because in
certain configurations it may lead to memory faults. A compile
time detection is added. If faulty usage is detected then
message is replaced with error message which indicates which
message failed and what shall be done (casting to a pointer
of different type).
Validation is enabled only for configurations which remove
strings from binary as otherwise it may impact CI execution
time.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
By making short inputs optional, the user can bypass short-events all
together if necessary (e.g. custom button-press listener).
Signed-off-by: Juliane Schulze <juliane.schulze@deveritec.com>
This moves including of demand_paging.h out of kernel/mm.h,
so that users of demand paging APIs must include the header
explicitly. Since the main user is kernel itself, we can be
more discipline about header inclusion.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Initially, the command/reply ID byte was not part of the data length
macros. But later, when it was changed to include it, the buffer length
checks was not adjusted. Due to this, we were not using the last byte in
the buffer. Fix this issue by correcting the condition.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Commit c7fec71193 ("mgmt/osdp: Add length checks for commands and
replies") attempted to remove code duplication by adding a macro to perform
a length check. At the time, a CI linter did not like macros with control
flow so the code was switched to a method which called __ASSERT() on this
condition.
The __ASSERT() macro is a nop if CONFIG_ASSERT=n (which is the default) and
causes the buffer access to be unguarded which may lead to OOB accesses.
This patch fixes the issue by reintroducing the if check.
Fixes: c7fec71193.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Zbus uses mutexes internally that are available
only when MULTITHREADING is enabled so add
it to fix the following error:
/opt/zephyr-sdk-0.16.3/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/
12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd: zephyr/subsys/
zbus/libsubsys__zbus.a(zbus.c.obj): in function `k_mutex_init':
/builds/zephyr/mcuboot/zephyr/include/generated/syscalls/kernel.h:969:
undefined reference to `z_impl_k_mutex_init'
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Improved the updates to the name ID metadata (NVS_NAMECNT_ID) item
in the Settings NVS backend implementation. The improvements should
make the implementation more robust in handling edge cases such as:
power downs, resets or a case in which the storage partition is
full. In the last case, the NVS backend could return an ENOSPC error
in the context of the settings_delete API. This change also fixes
this issue.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
When a client uses wildcard subscription and a new message is
published to the matching topic for the first time, the gateway
sends REGISTER message to the client, containing the exact
topic name and a new topic ID.
This change fixes adding these topic ID and name to the internal
topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
Add a function to MQTT-SN library API to get topic name by ID
from the internal topics list.
Signed-off-by: Alexander Vasiliev <alexander.vasiliev@siemens.com>
This adds non-volatile settings for the HAS Server. Those are needed to
restore the client awareness of preset list entries exposed by the
server. Based on the settings, the implementation determines how to
notify the client about the HAS related characteristic value changes.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Added igmpv3 support based on the already existing structure for igmpv2.
The already existing api is not modified to prevent breaking exisiting
applications.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Added igmpv3 checksum function to make it possible to calculate the
checksum of a complete igmpv3 pkt at once.
Signed-off-by: Ibe Van de Veire <ibe.vandeveire@basalte.be>
Fix the CMakeLists of the tls_credentials and sockets folders
to link/interface to the net library instead of the zephyr library.
This fixes issues where some files are not found in the link interface
when compiling the sources in this folder.
Signed-off-by: Declan Snyder <declan.snyder@nxp.com>
Make sure we send the entire packet buffer before bumping the packet
counter, send() does not guarantee that all of the requested data will
be sent at once with STREAM socket.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case underlying socket reported error while waiting for TX, the
errno value was not set accordingly. This commit fixes this.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Otherwise, if the application was for example blocked on poll() pending
POLLOUT, it won't be notified.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Rework how data is queued for the TCP connections:
* net_context no longer allocates net_pkt for TCP connections. This
was not only inefficient (net_context has no knowledge of the TX
window size), but also error-prone in certain configuration (for
example when IP fragmentation was enabled, net_context may attempt
to allocate enormous packet, instead of let the data be fragmented
for the TCP stream.
* Instead, implement already defined `net_tcp_queue()` API, which
takes raw buffer and length. This allows to take TX window into
account and also better manage the allocated net_buf's (like for
example avoid allocation if there's still room in the buffer). In
result, the TCP stack will not only no longer exceed the TX window,
but also prevent empty gaps in allocated net_buf's, which should
lead to less out-of-mem issues with the stack.
* As net_pkt-based `net_tcp_queue_data()` is no longer in use, it was
removed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Add new function to allocate additional buffers for net_pkt, w/o any
additional preconditions/checks. Just allocate what was requested.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The UART flush is not relevant for the async UART implementation.
UART drivers should handle this internally.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Use single ring buffer and protect it with a spinlock as it is
shared between backend and UART thread (ISR). This is simpler
than the double ring buffer setup.
The receive idle timeout has also been made configurable
instead of being a hardcoded value.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
The current implementation only waits for the RX disabled event
to determine if the UART is closed. It should wait for all RX
buffers to be released, and the TX to be done as well.
We now also call uart_tx_abort() when closing the pipe.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
RSRQ is the ratio between send and received signal strength and usually
understood/expected to be represented as a ratio in dB and as such always
has a negative range. So to allow RSRQ to be represented correctly the
resource must allow negative values, but currently it's limited to unsigned
8bit integers.
Signed-off-by: Henning Fleddermann <henning.fleddermann@grandcentrix.net>
BINDESC can be used with any POSIX arch based target,
not just native_posix.
Fix the kconfig filter and the sample yaml filter.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Possible NULL pointer dereferences where discovered by static
code analysis, they are addressed in this commit.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Network interface numbering starts from 1, therefore when accessing
help/index array, the interface index should not be used directly, but
rather decremented by 1, to avoid out-of-bound access on those arrays.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Make sure that the error message does not overflow the transmit buffer
when copying the error message string.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There's not really much to do when the transmission of the error reply
fails, but we can at least log the failure.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The result of string to float conversion in LwM2M shell write command
was not verified, which could result in incorrect data being written to
the resource.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix potential integer overflow by casting one of operands to int64_t.
Coverity-CID: 329961
Fixes#65356
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
The Private Beacon Client API requires a response argument to allow to
call the API in the asynchronous manner
(https://github.com/zephyrproject-rtos/zephyr/pull/56426).
Because the removal of the EXPERIMENTAL tag for this API was not
released yet, it should be OK to change this API.
The EXPERIMENTAL tag has been removed here:
https://github.com/zephyrproject-rtos/zephyr/pull/64866
Coverity-CID: 330039
Coverity-CID: 330029
Coverity-CID: 329977
Fixes#65336Fixes#65338Fixes#65354
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Verify the return value of net_pkt_skip() function, in case the parser
ignores the unrecognized options, so that in case the option was
malformed and the actual provided option length exceeds the packet
length, it is recognize (net_pkt_skip() should fail then).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
As reported by Coverity, cpkt was being used before checking it's not
NULL.
Fixes#65372 / CID: 323075
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
the reason is that the Mesh Profile clearly stipulates that Mesh nodes
cannot change their own element definitions.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Do not enable subsystem/driver shell modules by default and stop abusing
CONFIG_SHELL_MINIMAL, which is internal to the shell subsystem, to decide
when to enable a driver shell.
The list of shell modules has grown considerably through the
years. Enabling CONFIG_SHELL for doing e.g. an interactive debug session
leads to a large number of shell modules also being enabled unless
explicitly disabled, which again leads to non-negligible increases in
RAM/ROM usage.
This commit attempts to establish a policy of subsystem/driver shell
modules being disabled by default, requiring the user/application to
explicitly enable only those needed.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Since lwm2m_load_tls_credentials(ctx) will assume that the ctx has a
valid security object assigned to it, it should not be called at all
when ctx.use_dtls == false.
This solves a major bug where LwM2M comms are DTLS encrypted but FOTA is
allowed to be plain-text.
Signed-off-by: Benjamin Lindqvist <benjamin@eub.se>
No issues with gcc but clang gives this error for
the *v4 variable few lines below.
.../lib/dns/mdns_responder.c:712:2: error: expected expression
struct net_context *v4;
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Instead of just listening first network interface in the system,
install a multicast listener to all available network interfaces.
Fixes#18748
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add a helper macro that can be used at runtime to return
the number of network interfaces in the system.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Allow user to bind to different network interface. This is
useful if binding a multicast address to a certain network
interface.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
