EATT is the only user of `bt_l2cap_chan_send_cb`, and not necessary. We
can maintain the same functionality without it.
Instead of passing and storing the callback into l2cap, we can store it
in a callback queue in the ATT bearer struct.
This will allow us to remove that internal API later, in order to
streamline the l2cap API.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
Replace hardcoded value `8` with `CONFIG_BT_CONN_TX_USER_DATA_SIZE`,
that is `8` but is going to change.
Signed-off-by: Aleksander Wasaznik <aleksander.wasaznik@nordicsemi.no>
If some specific option is not enabled, then add missing
ARG_UNUSED() calls in relevant functions.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option setters for bool, uint8_t and uint16_t
values. Use those generic setters when storing the desired
option value.
The uint16_t option setter stores the value to uint16_t variable
and expects that user supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Set separate option getters for bool, uint8_t and uint16_t
values. Use those generic getters when fetching the desired
option value.
Noticed mixed usage (bool vs int) for txtime option. Changed
the code to use int type like in other options.
The uint16_t option getter gets the value from uint16_t variable
but returns int value to the caller, and also expects that user
supplies int value.
For uint8_t value, it is expected that uint8_t value is supplied
instead of int.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
slab_buff size is calculated based on size of osdp_ephemeral_data union
so it is safer to use same structure for slab init.
Changes in osdp_event or osd_cmd structures can cause crashes without this.
Signed-off-by: Arkadiusz Wadowski <wadowski.arkadiusz@gmail.com>
This allows external applications wishing to report coverage data over
different interfaces the ability to do so by exposing the gcov list.
Signed-off-by: Joshua Lilly <jgl@meta.com>
This allows HCI drivers to expose vendor-specific functions to set the
public address.
Signed-off-by: Armin Brauns <armin.brauns@embedded-solutions.at>
The Zephyr's core ethernet code had to be adjusted to support setting T1S
PLCA parameters from user Zephyr programs.
Such approach allows more flexibility, as T1S network configuration;
especially PLCA node numbers, can be assigned not only via device tree
at compile time. For example user can read them from EEPROM and then
configure the network accordingly.
For now - the union in struct ethernet_t1s_param only consists of plca
structure. This can change in the future, when other T1S OA parameters -
like Receive/Transmit Cut-Through Enable (bits RXCTE/TXCTE in OA_CONFIG0
register) are made adjustable from user program.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
As other helper functions were introduced for the LE Power Control
Request Feature (see CONFIG_BT_TRANSMIT_POWER_CONTROL), it was noticed
that the return statements of switch cases should be on the next line
generally. This will align phy2str with the rest in bt.c.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
To use LE commands of Le Power Control Request Feature one must utilize
the BT_TRANSMIT_POWER_CONTROL config.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
This commits adds the LE API's for the LE Power Control Request Feature
in Zephyr.
The support of feature is provided with the controller-based feature
selection with BT_CTLR_LE_POWER_CONTROL_SUPPORT and is selectable via
BT_TRANSMIT_POWER_CONTROL.
With the new APIs, the applications will:
get improved reading of local and remote tx power
be aware of changes in remote or local tx power
Defined HCI commands in Core Spec v5.4:
7.8.117 LE Enhanced Read Transmit Power Level command:
improvement to existing local tx power reading.
7.8.118 LE Read Remote Transmit Power Level command:
Remote tx power is read through an event (LE Transmit Power Reporting)
7.8.121 LE Set Transmit Power Reporting Enable command:
Enables local or remote tx power reporting to monitor changes in tx power
7.7.65.33 LE Transmit Power Reporting event
Note: to utilize the Feature fully Nordic-LL-only vendor-specific commands
are needed. These will not be added in RTOS zephyr but instead
implemented in a maintainable way in sdk.
Signed-off-by: Kyra Lengfeld <kyra.lengfeld@nordicsemi.no>
Protected credential storage makes use of the PSA API, therefore it must
be present in the library include path. This was missed during the
recent CMakeLists.txt rework of this library.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Fix l2cap error handling generally not properly disposing of tx buffers for
enhanced channels; Any callbacks have to be called and the
l2cap_tx_meta_data has to be freed
Signed-off-by: Troels Nilsson <trnn@demant.com>
Add a name for the Kconfig choice symbol
indicating the Zbus subscriber buffer allocation
and adjust the name of the existing choices.
Signed-off-by: Bartosz Bilas <bartosz.bilas@hotmail.com>
atomic_*_bit functions work with atomic_t arg as with array, therefore
the atomic variable should be declared using ATOMIC_DEFINE.
Coverity-CID: 333358
Fixes#65588
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Regular OpenThread upmerge to commit `75694d2`.
Move CONFIG_OPENTHREAD_PLATFORM_KEY_REFERENCES_ENABLE
from header file to Kconfig.
Signed-off-by: Maciej Baczmanski <maciej.baczmanski@nordicsemi.no>
If we for some reason are supplied unsupported socket type in
recvfrom(), then return ENOTSUP error to the caller instead of
silently accept it by returning 0.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
If user has set either IP_PKTINFO (for IPv4) or
IPV6_RECVPKTINFO (for IPv6) socket options, then the system
will return relevant information in recvmsg() ancillary data.
Fixes#36415
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add IP_PKTINFO or IPV6_RECVPKTINFO BSD socket options that
can be used to get extra information of received data in
the ancillary data in recvmsg() call.
For IPV6_RECVPKTINFO see RFC 3542 for details.
For IP_PKTINFO see Linux ip(7) manual page for details.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Add low level support for setting IP_PKTINFO or IPV6_RECVPKTINFO
socket options. The support is disabled by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
Using this new library it is now possible to leverage the memory
attribute property 'zephyr,memory-attr' to define and create a set of
memory heaps from which the user can allocate memory from with certain
attributes / capabilities.
When the CONFIG_MEM_ATTR_HEAP option is set, every region marked with
one of the memory attributes listed in
include/zephyr/dt-bindings/memory-attr/memory-attr-sw.h is added to a
pool of memory heaps used for dynamic allocation of memory buffers with
certain attributes.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
This removes spurious error message printed when CIS has been
disconnected and it was not used by any of the endpoints.
This case is valid and may happen on Connection Timeout when the
controller reports ACL Disconnection first.
When the CIS Disconnection is reported after, the ASE is already in idle
state and the referenece to CIS has been already removed (on ACL
disconnection).
Fixes: #64896
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
Revert back to implementation that did early abort of
previous prepare when a short prepare is enqueued.
Adds back implementation deleted in
commit 7f388bb70a ("Bluetooth: Controller: Fix short
prepare when many enqueued in pipeline").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor refactor of Kconfig order such that the advanced
feature Kconfig is just above the enabling/visible of the
advanced features menu.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
The original SHI module only has one output FIFO buffer. It costs a lot
when the driver has to send/change the protocol control code because it
must fill out all 128 bytes of output FIFO. In npcx4, we introduce
another output buffer in 1-byte depth. These two buffers can switch back
and forth during the transaction. We can use the single-byte buffer
to send the control code and the 128-byte FIFO to send the data payload.
It helps improve the SHI driver's efficiency.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Implement the pm_policy lock to prevent the chip enters the deep slepp
mode while shi transaction is ongoing.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
Changes of call state were not notified. Fixed by calling notify_calls
in respective functions.
Signed-off-by: Lukas Streitenberger <lukas.streitenberger@wsa.com>
Since sending of public key was moved into system
work (https://github.com/zephyrproject-rtos/zephyr/pull/62331)
it uses the same context as a Host Tx buffer
allocator for gatt sending. Host cannot wait for
free buffer anymore. Mesh requires 4 buffers
to send max size frame(public key) during
provisioning.
Signed-off-by: Aleksandr Khromykh <aleksandr.khromykh@nordicsemi.no>
Logging shall not use character pointers with %p because in
certain configurations it may lead to memory faults. A compile
time detection is added. If faulty usage is detected then
message is replaced with error message which indicates which
message failed and what shall be done (casting to a pointer
of different type).
Validation is enabled only for configurations which remove
strings from binary as otherwise it may impact CI execution
time.
Signed-off-by: Krzysztof Chruściński <krzysztof.chruscinski@nordicsemi.no>
By making short inputs optional, the user can bypass short-events all
together if necessary (e.g. custom button-press listener).
Signed-off-by: Juliane Schulze <juliane.schulze@deveritec.com>
This moves including of demand_paging.h out of kernel/mm.h,
so that users of demand paging APIs must include the header
explicitly. Since the main user is kernel itself, we can be
more discipline about header inclusion.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Initially, the command/reply ID byte was not part of the data length
macros. But later, when it was changed to include it, the buffer length
checks was not adjusted. Due to this, we were not using the last byte in
the buffer. Fix this issue by correcting the condition.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Commit c7fec71193 ("mgmt/osdp: Add length checks for commands and
replies") attempted to remove code duplication by adding a macro to perform
a length check. At the time, a CI linter did not like macros with control
flow so the code was switched to a method which called __ASSERT() on this
condition.
The __ASSERT() macro is a nop if CONFIG_ASSERT=n (which is the default) and
causes the buffer access to be unguarded which may lead to OOB accesses.
This patch fixes the issue by reintroducing the if check.
Fixes: c7fec71193.
Signed-off-by: Siddharth Chandrasekaran <sidcha.dev@gmail.com>
Zbus uses mutexes internally that are available
only when MULTITHREADING is enabled so add
it to fix the following error:
/opt/zephyr-sdk-0.16.3/arm-zephyr-eabi/bin/../lib/gcc/arm-zephyr-eabi/
12.2.0/../../../../arm-zephyr-eabi/bin/ld.bfd: zephyr/subsys/
zbus/libsubsys__zbus.a(zbus.c.obj): in function `k_mutex_init':
/builds/zephyr/mcuboot/zephyr/include/generated/syscalls/kernel.h:969:
undefined reference to `z_impl_k_mutex_init'
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
