Bluetooth Mesh Protocol 1.1 is backward compatible with Bluetooth Mesh
Profile 1.0.1, therefore the stack can still be qualified for 1.0.1 if
needed. But explicit support for both versions requires additional
maintenance efforts and doubles the CI time. To make the stack
qualifiable for 1.0.1, the one needs to remove Private Beacons reception
and compile out SHA256 algorithm support.
What is changed:
- Removed `CONFIG_BT_MESH_V1d1` option.
- Removed `transport_legacy.c` which was using 1.0.1 implementation. The
new transport layer has new SaR logic that should still be possible to
qualify for 1.0.1.
- Removed the legacy transport Kconfig options. They are superseded by
the new transport Kconfig options.
- Tester app: `overlay-mesh-v1d1.conf` is merged into
`overlay-mesh.conf`.
- Removed BabbleSim tests for 1.0.1.
- Updated documentation.
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Implement DHCPv4 shell module, which allows to start/stop DHCPv4 server
operation, and print server status (address leases).
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Increase socket services thread default stack size when DHCPv4 server is
enabled, as it uses synchronous processing.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
So that it's possible to register ARP entries manually. Needed for DHCP
server implementation, which in unicast mode needs to reply to an IP
address that is not registered on the peer interface yet (hence no ARP
reply will be sent). It's needed to add an ARP entry manually in that
case, as hardware address is already known at that point.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
There is a possibility that the SPI STM32 Host Command backend is being
suspended, without earlier initialization.
Make sure we are not accessing uninitialized pointer, namely the cs
structure.
Signed-off-by: Dawid Niedzwiecki <dawidn@google.com>
Remove the CAN_FILTER_FDF flag for filtering on classic CAN/CAN FD frames
as it is not supported natively by any known CAN controller.
Applications can still filter on classic CAN/CAN FD frames in their receive
callback functions as needed.
Fixes: #64554
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Add new kconfig CONFIG_LWM2M_QUEUE_MODE_NO_MSG_BUFFERING.
When enabled and device is sleeping, Reqistration Update
message is skipped and messages from send operation and
notifications are sent right away.
Reqistration update message is also skipped when
lwm2m_engine resumes from pause state.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
L2 PPP is not able to handle the carrier being lost gracefully,
nor is it able to gracefully close the PPP connection when
net_if_down() is called.
This patch refactors the L2 PPP module to use the carrier state
to either properly close or simply terminate the PPP connection.
Additionally, it ensures that the PPP session is closed properly
before calling ppp->stop().
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Get TLS_DTLS_CID_STATUS and TLS_DTLS_PEER_CID_VALUE utilize
mbedtls_ssl_get_peer_cid, which expects that mbedtls_ssl_setup
has been done.
Signed-off-by: Markus Lassila <markus.lassila@nordicsemi.no>
Fixes an issue whereby a message which is too large was attempted
to be sent via the UDP transport would wrongly give an error in
value error
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
User is able to tweak the socket service dispatcher thread
priority in order to get better performance from the system
if needed. By default the dispatcher thread runs in lowest
application thread priority (K_LOWEST_APPLICATION_THREAD_PRIO).
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The thread name output field was a bit too short in "net sockets"
command, so make it 25 char long.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The "net sockets" command was not checking if there is any
sockets in the system before trying to access them.
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
When using the auto discover CCC, and the function is called
more than once with the same parameters before the previous
discovery has completed, then that may cause issues when we
reset the parameters when we get the response.
This commit adds a small check for the callback function
which is only set to the specified function when the
discovery is in progress. This way we can return an error
if the application calls bt_gatt_subscribe multiple times
before the previous discovery has completed, rather
than asserting.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Fixes:
/__w/zephyr/zephyr/subsys/usb/usb_c/usbc_tc_src_states.c:260:21: error:
declaration of 'ret' shadows a previous local [-Werror=shadow]
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The channel extraction from string directly uses the end variable with
limited data type, this causes issue if an invalid channel that exceeds
the data is given as an input e.g., 300, which would end up as a valid
channel 44.
Use an intermediate variable with type that can hold all possible
combinations (valid and invalid) and only after validation assign that
to the end type.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
For none and WPA-PSK MFP isn't applicable, it was only introduced in
WPA2-PSK (RSN) and later.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Do not process SegAcks which were not targeted to the node.
They were rejected in the next if statement always, but generated
the annyoing warning "No matching TX context for ack".
Signed-off-by: Pavel Vasilyev <pavel.vasilyev@nordicsemi.no>
Add calls to the PPC API that enables and disables the sink and source
paths in the appropriate USB-C stack states.
Signed-off-by: Michał Barnaś <mb@semihalf.com>
When device runtime pm is enabled on console device, do not suspend
device synchronously on each char transmission, but rather use asynchronous
suspension request.
This will save useless and costly suspension/resumption procedure, which
can involve uart device clock suspension but also pin configuration
to sleep state (which itself involves gpio clock activation ...).
On STM32, using asynch device suspension allows to divide by 3 the
transmission time of a character chain.
Signed-off-by: Erwan Gouriou <erwan.gouriou@st.com>
Add support for controlling whether the local controller
should transcode, or whether it will be done by another
module (e.g. the host).
By default when using the macros,
controller transcoding will be disabled.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The read callbacks may be called with conn == NULL if the device
does a local read of the attributes. This commit ensures that all
the read callbacks can handle the case where conn == NULL.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Various network shell commands like ping need floating
point support from libc so select the CONFIG_REQUIRES_FLOAT_PRINTF
option for it.
Fixes#67601
Signed-off-by: Jukka Rissanen <jukka.rissanen@nordicsemi.no>
The place where TF-M places its non-secure api header files has changed
Therefore changing it for for all applications that use it.
Signed-off-by: Markus Swarowsky <markus.swarowsky@nordicsemi.no>
Use transmit idle event to synchronize with data transmitted
through DLCI pipes to test TRANSMIT_IDLE implementation.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
Implement transmit idle event both for transmitting data to the
bus, and for the individual DLCI channels.
Signed-off-by: Bjarki Arge Andreasen <bjarki@arge-andreasen.me>
