This commit adds the Media Control Client from the topic-le-audio
branch. This is a part of the upmerge of the le-audio media control
files.
This client has been developed and maintained over a couple of years
now, and is mature. During the development it has passed both
IOP-testing and PTS qualification testing.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
some include paths updated as a consequence
- as a consequence, CMake files and Kconfig files updates are done in
other locations
- a macro for debug output of Object ID values has been (temporarily)
added to mcc.h, to avoid a dependency
- a blank line added after a declaration and an overlong line split,
to pass check_compliance
- copyrights have been updated
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
This commit adds the Object Transfer client from the topic-le-audio
branch. This is a part of the upmerge of the le-audio media control
files. Media control depends upon Object Transfer for feature
completeness.
This client works, and has been used for IOP- and PTS-testing of the
media control server and client. It does, however, need an overhaul
before being made "Zephyr official", so for now it will be kept as an
internal file to the le-audio code.
The commit is a pure copy of the files and content in the
topic-le-audio branch, with the following exceptions:
- files are in bluetooth/audio instead of bluetooth/host/audio, with
an include path updated as a consequence
- a sa consequence, CMake files and Kconfig files updates are done in
other locations
- In otc.c a superfluous semi-colon has been removed to please
check_compliance
- Kconfig.ots has been renamed to Kconfig.otc, as there is only
otc-content left in that file
- copyrights have been updated
- add TODO that these files are to be cleaned up and moved
The Object Transfer Client in this commit was originally written by
Leif Aschehoug <Leif-Alexandre.Aschehoug@nordicsemi.no>.
It has later been updated and maintained by
Emil Gydesen <emil.gydesen@nordicsemi.no> and
Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
Signed-off-by: Asbjørn Sæbø <asbjorn.sabo@nordicsemi.no>
ots
The RSSI measurement was not enabled while receiving periodic
advertising. The function responsible for enable the feature
in radio was called, but it was done too early.
It was overwritten by radio_switch_XXX function that assigns
a value to RADIO->SHORTS register.
Signed-off-by: Piotr Pryga <piotr.pryga@nordicsemi.no>
If an LTK or an STK is available and encryption is required
(LE security mode 1) but encryption is not enabled, the
service request shall be rejected with the error code
"Insufficient Encryption".
This is affecting L2CAP/LE/CFC/BV-25-C and L2CAP/ECFC/BV-32-C
qualification test cases.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This was affecting L2CAP/LE/CFC/BV-26-C, L2CAP/LE/CFC/BV-27-C,
L2CAP/ECFC/BV-33-C and L2CAP/ECFC/BV-34-C qualification test cases.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This comment was previously associated with a stand-along net_buf_ref
call. Now it's not clear what exactly it's referring to, and the
additional reference to net_buf_put() is fairly self explanatory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Move the header file csis.h from the internal location to
the public include directory. This file is supposed to provide
the public API for CSIS and the CSIS client, but is not fully
complete yet.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the coordinated set identification service (CSIS) client.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adds the coordinated set identification service (CSIS) server.
This is still a work in progress and thus there are no public
API for it yet, and some code changes will still be needed.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Adding a KConfig to allow for disabling of the passing of invalid SDUs
through the ISOAL HCI data path.
Defaults to keeping current behavior.
Signed-off-by: Erik Brockhoff <erbr@oticon.com>
The mesh shell module owns the composition data for the shell
application, which makes it impossible to use it outside of the
application itself. To support the shell as a generic debugging
component that can be added to any application, we have moved the
composition data out of shell.c, and into the application.
Signed-off-by: Ingar Kulbrandstad <ingar.kulbrandstad@nordicsemi.no>
bt_ccm_encrypt only works when encrypting in place. To fix this
ccm_auth() inside bt_ccm_encrypt() must take plaintext instead of
enc_data, to not rely on assumption that plain and cypher data are the
same memory.
Signed-off-by: Ilya Makarov <ilya.makarov.592@gmail.com>
Fixes: #40069
Fix missing auxiliary context release when reception of
Periodic Advertising Chain PDU fails due to header complete
timeout, i.e. no reception of on-air PDU. Also, fix missing
generation of auxiliary reception failure notification when
no auxiliary context was allocated for chain PDU reception.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When an CIS is connected, the peripheral did not have
any information about the QoS settings. This commit
adds information about the PHY and SDU. For some reason
the peripheral won't ever have information about the RTN.
The remaining values in the event (interval, delay and
latency) are still not exposed, nor is framing or
packing, the latter of which are not part of the event.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
When Device use pb-gatt bearer provisioning, and first
provisioning failed due to some reasons(invalid oob etc..).
Which cause `proxy:gatt_disconnectd` incorrected write `conn_count`
Cause this var euqals `-1`.
Signed-off-by: Lingao Meng <menglingao@xiaomi.com>
Fix Advertising LLL header initialization to be done early
so that other functions like Periodic Advertising Parameter
set functions can use LLL context to reference ULL conttext.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Move Periodic Advertiser List option check in LE Periodic
Advertising Create Sync command to HCI.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix Extended Scan Duplicate Filtering to consider different
advertising mode and multiple advertising set id from same
advertiser Bluetooth device address.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use function to get the set/clear AD data parameter to
populate the common extended payload format field.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Updated the implementation to allow population of auxiliary
pointer field as necessary to append PDU chains.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing traversal of TargetA field in advertised Common
Extended Payload Format. This will cause invalid offset used
for fields following the TargetA when Extended Directed
Advertising is used.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix ASSERTION FAIL [!hdr->disabled_cb] @ ull_conn.c:882
When initiating a connection using continuous scan window
if there is preemption by the next window then the ISR
callback was overwritten to switch to next scan window
instead of the initiator event being closed.
Fixed by not aborting the initiating state when requested
by the next continuous scan window.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use define for maximum number of primary advertising radio
channels used while scanning.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
In HCI event, PHY indices start at 1 compare to 0 indexed in
aux_ptr field in the Common Extended Payload Format in the PDUs.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Minor changes to remove redundant whitespaces and to use
uint8_t instead of uint32_t to return true or false.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing reset of LLL scheduling flag when auxiliary PDU
scan scheduled in LLL is aborted due to preemption.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix continuous skipping of Extended Scanning of Auxiliary
PDUs. Due to duplicate prepare events of continuous scanning
present before the auxiliary scanning prepare, preemption
schedules only the primary scan prepare and auxiliary scan
infinitely is postponed.
This is a revert of commit 190532bcc4 ("Bluetooth:
Controller: Only remove duplicate resume events").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Implementation to fragment the list of received Extended
Advertising PDUs into HCI LE Extended Advertising report
events.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix missing implementation to setup the PDU radio end
timestamp capture for Scan Response PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Use variable names lll and lll_aux for struct lll_scan and
struct lll_scan_aux respectively.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add implementation to check auxiliary PDU device address
match by comparing the address in the AUX_ADV_IND PDU with
the addresses in the filter accept list.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
