Now that k_poll landed in the kernel, it's worth using it to save
memory and reduce the number of threads at runtime.
Such switch has been first done in bluetooth (see hci_core.c and conn.c
in subsys/bluetooth/host). Since network interfaces kind of follows the
same design for sending data, it was then easy to copy the same change as
in bluetooth.
Change-Id: I7f9734b88ac818284bbabaedc946b4765b905ebb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch automates flashing process for arduino_due board. Just make flash will able
to flash binary file on the board.
Bossa tool(http://www.shumatech.com/web/products/bossa) manual flashing process is
automated through shell script and currently this binary is only available for
x86_64 architecture.
JIRA : ZEP-145
Change-Id: Ib7b525466239d0437e449c56827f8a9b3e5a96a1
Signed-off-by: Punit Vara <punit.vara@intel.com>
This is a corner case that barely hits and thus we had not seen it
before.
Change-Id: Ie1420a4c866834e5a233985c6b8a19643426a1f5
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Adjust the checkpatch script to recognize the volatile keyword as
forming part of a declaration. This prevents inappropriate checkpatch
gripes for patches such as:
https://gerrit.zephyrproject.org/r/#/c/10345/
Change-Id: Ia29a9002bb9ef15f747d29231d938ae12790724d
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
We default DTC to /usr/bin/dtc so we can build targets that are using
devicetree and not using the zephyr SDK (which provides a version of
dtc).
Change-Id: I84c3e3181eda75b4da715e16bbde2e67f28785e7
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the hardwired #! python path with a PATH search. This is
necessary to allow build tools to execute from a virtualenv.
Change-Id: Ib83131fd96656bc9f76c606356b1f92c877cc117
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
By convention Kconfigs are in all uppercase, but not strictly
required to be so. Currently the Xtensa build defines
CONFIG_${XTENSA_CORE} which can have lowercase letters. This
is marked for cleanup in ZEP-1711.
Issue: ZEP-1711
Change-Id: Ia901ea1688202129f1629001a77f498522859f14
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This toolchain Makefile defines CC/CXX directly so we need to add
a USE_CCACHE case here.
Change-Id: Iee8dc6ab030db8dc45b16e21c5b17864e51341b4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
A ctrl-c in the script wouldn't terminate the child process.
Only do the pid trick if we're communicating with sanitycheck over
pipes.
Change-Id: I79da7362958b5fac00defd74d4b709076085575b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Manu command lin eoption are not supported by xt-c++. There are filtered out
when calling Makefile.toolchain.xcc.
Change-Id: I1e60843d2b23f90250fbb493487c6fc838b7485a
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
If passed after the file they are just ignored silently!
Change-Id: Ic9b04c3023e4d312382850fa5e1b5ae4ef555856
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
When current directory is a symbolic link or in a symbolic link then os.getcwd
return the real path leading to os.path.relpath returning not so nice relative
path.
Change-Id: I3e24d3e6f1fe7185992f64803d3728e9588d67e1
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Sanitycheck actually creates the pipes, using a naming convention imposed
by QEMU. We also need to leave a PID file.
'xt-run' Make target removed, we don't need it.
Change-Id: Ie9fd9dbb1327eb4b10424e7ee5d2f4dc09b121a4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This allows handling options like --fatal-warnings that are passed by
sanitycheck.
Change-Id: Ia78dcef480d9d81cab6051453204c05d52917af2
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This completely breaks all the cc-option checks. It's not clear
why this was done for everyone running sanitycheck.
Change-Id: I3f944423869ccb15fab29c28130820a93cd94917
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
In scripts/Makefile.qemu, the target qemu is already an alias for taget run.
In scripts/Makefile.xt{,sc}-run there is no target qemu but a target run.
Change-Id: Ib9dce3561ef9367b17d30070354e709df4d7e528
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
XCC does not recognize __builtin_unreachable() and thus cause a link error.
Change-Id: I5dadf5a49d971d5e0a5ef88d582bb5ad2c36bced
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
These libraries are unlikely to be uesd by GCC port and thus should not be in
a generic make file. Moved to specific toolchain make file.
Change-Id: Ib585b87700e409d678f7a5cb60cff67b6022ab05
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This patch adds the base DTS support for the V2M Beetle board. The
initial set of changes include SRAM, FLASH, and IRQ controller support.
Change-Id: I06685622b9c57ac358544c71350074ce06e3371e
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds support for using device tree configuration files for
configuring ARM platforms.
In this patch, only the FLASH_SIZE, SRAM_SIZE, NUM_IRQS, and
NUM_IRQ_PRIO_BITS were removed from the Kconfig options. A minimal set
of options were removed so that it would be easier to work through the
plumbing of the build system.
It should be noted that the host system must provide access to the
device tree compiler (DTC). The DTC can usually be installed on host
systems through distribution packages or by downloading and compiling
from https://git.kernel.org/pub/scm/utils/dtc/dtc.git
This patch also requires the Python yaml package.
This change implements parts of each of the following Jira:
ZEP-1304
ZEP-1305
ZEP-1306
ZEP-1307
ZEP-1589
Change-Id: If1403801e19d9d85031401b55308935dadf8c9d8
Signed-off-by: Andy Gross <andy.gross@linaro.org>
Use this configuration file with the uncrustify tool to fix style
issues. the configuration should apply the zephyr coding style on
source code files with a few minor excrption. Do not take the output for
granted, always check for correctness after running.
To use, for example:
uncrustify --replace --no-backup -l C -c $ZEPHYR_BASE/scripts/uncrustify.conf
This will do the changes inline.
Change-Id: Iecfd2e10bc7e475ca83de0d921ebb5d72156d286
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Many users set USE_CCACHE=1 in their envionment. Sanitycheck was
disregarding that and placing USE_CCACHE=0 in the generated
Makefile unless --ccache was added to the command line every time
it was invoked.
Issue: ZEP-1663
Change-Id: Id3c1379f5039d4d2f4a3ae01d2ec8d0dd216f523
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
As decided during the Zephyr Mini Summit in December 2016, we're going
to use the same Device Tree format as used by the Linux kernel to store
device configuration from vendors.
This is a parser written during the summit that will parse *.dts files,
and will be used as part of the solution to read in the files provided
by manufacturers and generate board configuration files.
The script will also optionally generate files in the DOT language so
that DTS files can be graphed using the Graphviz suite.
Change-Id: I6e2b7a64a6dcc349b2888332a660b4700af6cd63
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Adds initial support and documentation for the frdm_kw41z board.
- Configures the kw41 to use the 32 MHz external oscillator on the board
to generate a 40 MHz system clock. The clock settings match the MCUX
SDK hello_world example project.
- Provides pinmux settings for the uart, i2c, LEDs, and switches
- Enables pinmux, gpio, uart, and i2c driver instances
- Configures the fxos8700 accelerometer/magnetometer driver
Jira: ZEP-1390
Change-Id: I025a0eae3d380eaf90b02683acf5c592e2204a2e
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This reverts commit 9fb0c2af5c.
SDK 0.9 has now been released.
Change-Id: I676b6f0e31ab48fde3dda41b681abf53964ea9f9
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The 0.9 SDK is not released yet!!
This reverts commit 7995e6207c.
Change-Id: I550d1aa27ba7a06ff2cda09496ceb92645a17460
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Introduce support to tag some issues as warnings, that can be printed
but not considered errors.
Added the ability to write the errors and warnings to split files, for
later reporting.
Added a more consistent help.
Change-Id: Ia75430c3337385afca59595437168ab643c92911
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
ARM's Cortex-M Prototyping System (MPS2) is a board with an FPGA that
can be programmed with different 'SoCs'. To use these in Zephyr we need
a set of board files for each variant.
This adds a board for a variant which implements a Cortex-M3 CPU; the
naming of this matches that used for the Zephyr SoC (which is itself
based on ARM's documentation nomenclature).
Change-Id: Ie02a67a03016b8aeee31e3694f0edbcc37f9ee64
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
