Always generate the comment text specifying a node's path identifier.
Add the DT_ prefix so it matches the actual macro usable from C. This
will make a following patch which adds support for accessing a node's
parent result in a generated header file which is easier to read.
Put the node's path right after "Devicetree node:" in the comment.
This makes the section for that node easier to grep for.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
The root node's z_path_id value for the duration of this script
doesn't match the value DT_ROOT is defined to in devicetree.h.
I didn't notice this because the root node's compatible doesn't have a
matching binding in practice, so no macros are generated for it, but
we're about to start looking at node parents explicitly and this is an
issue for that. Fix it so the root node's z_path_id is "N", since
DT_ROOT is the token "DT_N".
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add generation of the following macros:
DT_N_<node-id>_REG_IDX_<idx>_EXISTS 1
DT_N_<node-id>_IRQ_IDX_<idx>_EXISTS 1
This will allow us to use IS_ENABLED() in DT_REG_HAS_IDX and
DT_IRQ_HAS_IDX which matches behavior of other DT_*_HAS_* macros as
well as lets use these with COND_CODE_1.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add generation of the following macros:
DT_N_<node-id>_P_<prop-id>_NAME_<NAME>_EXISTS
DT_N_<node-id>_P_<prop-id>_IDX_<idx>_EXISTS
This will be useful to check availability of named or indexed
property like dmas/dma-names.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
The last user of the .conf file format DTS data has been removed. We
can now remove the generation and associated support for the .conf file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Due to the use of UTIL_EVAL*() macros, the UTIL_LISTIFY() macro used
by DT_INST_FOREACH(foo) can cause long build errors when there is a
build error in the expansion for "foo". More than a thousand lines of
build error output have been observed for an error in a single line of
faulty C.
To improve the situation, re-work the implementation details so the
errors are a bit shorter and easier to read. The use of COND_CODE_1
still makes the error messages quite long, due to GCC generating notes
for various intermediate expansions (__DEBRACKET,
__GET_ARG_2_DEBRACKET, __COND_CODE, Z_COND_CODE_1, COND_CODE1), but
it's better than the long list of UTIL_EVAL notes.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
And implement DT_ANY_INST_ON_BUS() in terms of it.
This makes some error messages quite a bit shorter by avoiding
UTIL_LISTIFY(), which has a nasty temper and tends to explode if not
treated gently.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We get the following error:
ValueError: max() arg is an empty sequence
if the compatiable section of the device tree is empty or doesn't exist.
Fix this by havingin max_len get a default value of 0.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is joint work with Kumar Gala (see signed-off-by).
This supports a new devicetree macro syntax coming. It's not really
worth mixing up the old and the new generation scripts into one file,
because:
- we aim to remove support for the old macros at some point, so it
will be cleaner to start fresh with a new script based on the old one
that only generates the new syntax
- it will avoid regressions to leave the existing code alone while
we're moving users to the new names
Keep the existing script by moving it to gen_legacy_defines.py and
changing a few comments and strings around. It's responsible for
generating:
- devicetree.conf: only needed by deprecated kconfigfunctions
- devicetree_legacy_unfixed.h: "old" devicetree_unfixed.h macros
Put a new gen_defines.py in its place. It generates:
- zephyr.dts
- devicetree_unfixed.h in the new syntax
Include devicetree_legacy_unfixed.h from devicetree.h so no DT users
are affected by this change.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If the #address-cells property for a register is 0 than we set the addr
value of the reg to None. Similar, if #size-cells is 0 than we set the
size value to None for the reg.
Fixup kconfigfunctions.py to handle reg.size and reg.addr being None.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This rename is mostly to easy git managment and review so any changes or
the addition of the new gen_defines.py doesn't look like a diff against
the old code if you look at just that commit.
We keep changes to a minimum to just keep things building with the
renamed gen_legacy_defines.py.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This returns the entire logical {name: Node} dictionary which is
currently being accessed element by element via chosen_node(name).
It will be used in a new gen_defines.py for moving the handling of
chosen nodes into C from Python.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Pad node identifiers to 60 characters. This results in better
alignment in practice than the current value of 40, which is a bit
low.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This too is an attempt to reimplement the previous behavior exactly,
modulo the order in which things are defined.
This is the last function which is calling into the previous
implementation's out_node and node_*_alias() functions, so these can
be removed now.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This is similar to the work already done for regs.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
We're intentionally leaving some of the helpers in module scope here
to use some of the subroutines elsewhere later on when reworking
write_spi_dev().
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Mirror the change already done to write_regs().
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Use augmented nodes to print macros grouped by namespace.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Group the macros together by namespace rather than putting all the
BASE_ADDRESS macros together and all the SIZE macros together. E.g.,
all the DT_INST_<x> namespace macros for each node now appear
consecutively.
Add a comment making it clear that this output comes from "regs",
since "BASE_ADDRESS" and "SIZE" are not property names.
Other than the order in which they appear and comments, the output
before and after this patch should be exactly the same.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Add additional attributes to each edtlib.Node we process, before
calling into the write_foo() routines.
This includes the identifier returned by node_ident(), which is used
as the primary identifier for the node, as well as lists for instance
and aliases nodes, and a catchall list that contains all the other
identifiers in addition to the primary one.
Use this information in a new for_each_ident(node, ident) def that
will be put to use in the various write_foo() routines.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
spi_dev_cs_gpio() takes a Node and returns the chip select GPIO for it.
Having that information available directly from Node is neater, so turn
it into a Node.spi_cs_gpio property instead.
That gets rid of the only public global function in edtlib, which might
make the API design clearer too.
Tested with the sensortile_box board, which uses SPI chip select.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
It's better to allow per-instance EDT configuration than to set a global
variable on the edtlib module. Enable/disable the warning for reg/unit
address mismatches via a flag to EDT.__init__(), instead of via a global
variable. That makes it consistent too.
Another option would be to pass the 'dtc' flags to EDT.__init__(), but
it makes the interface a bit ugly. Maybe if it needs to emulate lots of
other flags later.
Clarify that edtlib itself isn't meant to have any state in the comment
at the top of the module.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a 'deprecation_msg' string/flag to out_dev(). When 'deprecation_msg'
is passed, all generated macros include
__WARN(<deprecation_msg>)
which prints a custom warning if the macro is used.
Meant to be used when improving the output format.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Single-bus warning in python parsing of device tree is suppressed if
this is also suppresed in the device tree compiler.
Signed-off-by: Andrei Gansari <andrei.gansari@nxp.com>
Change the key function used to sort nodes so that unit addresses, if
present, break ties between sibling nodes. This orders siblings in
increasing order by unit-address in any gen_defines output that is
sorted by ordinal.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This makes the results easier to read, since node output appears in
the same order as the top level comment summarizing the tree.
Reorganize how flash partitions are emitted so they also appear in
dependency order, allowing us to extend the comment at the top of the
file to say that nodes are emitted in that order, along with other
useful information.
Print comments even for nodes that are disabled or have no binding,
to make it clearer that the script considered them and decided not to
output anything for them.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
Change the output during CMake configure from
Devicetree configuration written to .../devicetree.conf
Parsing /home/ulf/z/z/Kconfig
Loaded configuration '.../frdm_kw41z_defconfig'
Merged configuration '.../prj.conf'
Configuration saved to '.../.config'
to
Devicetree header saved to '.../devicetree_unfixed.h'
Parsing /home/ulf/z/z/Kconfig
Loaded configuration '.../frdm_kw41z_defconfig'
Merged configuration '.../prj.conf'
Configuration saved to '.../.config'
Kconfig header saved to '.../autoconf.h'
devicetree_unfixed.h is more useful to be aware of than devicetree.conf
(still hoping we can get rid of it at some point), and seeing the
Kconfig header clarifies things to.
"Saved" instead of "written" for consistency. Maybe it could say
"Kconfig configuration" instead of "configuration" too, though it gets a
bit spammy in other contexts where the message shows up.
Updates Kconfiglib (and menuconfig/guiconfig, just to sync) to upstream
revision 061e71f7d7, to get this commit in, which is used to print the
header path:
Return a message from Kconfig.write_autoconf()
Like for Kconfig.write_config() and Kconfig.write_min_config(),
return a string from Kconfig.write_autoconf() with a message saying
that the header got saved, or that there were no changes to it. Can
be handy in tools.
Also make the "no change" message for the various files more
specific, by mentioning what type of file it is (configuration,
header, etc.)
Return True/False from Kconfig._write_if_changed() to indicate if
the file was updated. This also allows it to be reused in
Kconfig.write_min_config().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a '--dts-out <file>' flag to gen_defines.py that saves the final
devicetree to <file>, in DTS format, using the new EDT.dts_source
attribute.
Handy to have available as a debugging aid. Unused otherwise.
Also write a dummy <BOARD>.dts_compiled file that tells people to look
at zephyr.dts, for people that might be used to that file. It was
removed in commit 8d8b06978c ("dts: Remove generation of
<BOARD>.dts_compiled").
Fixes: #22272
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add an EDT.compat2enabled attribute that maps compatibles to enabled
devicetree nodes that implement them. For example,
EDT.compat2enabled["foo"] is a list of all enabled nodes with "foo" in
the 'compatible' property.
The old Node.instance_no functionality can be implemented in terms of
EDT.compat2enabled, so remove Node.instance_no. EDT.compat2enabled is
more flexible and easier to understand.
Simplify main() in gen_defines.py by using EDT.compat2enabled to
generate the DT_COMPAT_<compatible> existence macros. The behavior is
slightly different now, as DT_COMPAT_<compatible> is generated for
enabled nodes that don't have a binding as well, but that might be an
improvement overall. It probably doesn't hurt at least.
EDT.compat2enabled simplifies the implementation of the new
$(dt_compat_get_str) preprocessor function in
https://github.com/zephyrproject-rtos/zephyr/pull/21560. That was the
original motivation.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
'type: path' was added to edtlib for completeness in commit 23a5b4963b
("dts: edtlib: Add 'type: path' for path references"). gen_defines.py
crashes if it's ever used though, because it gets confused for a
'type: phandle-array'.
Ignore 'type: path' properties in gen_defines.py, like how
'type: phandle' and 'type: phandles' are currently ignored too.
(Note that gen_defines.py is only one possible user of edtlib.)
Fixes: #22197
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Use f-strings instead of .format() to makes all the macro identifier and
multiline comment building easier to read.
f-strings were added in Python 3.6, which is required by Zephyr now.
Convert some
... + "_" + ...
string building to f-strings as well.
f-strings are a bit faster too (because they avoid format()/str()
lookups), though it's not likely to be noticeable here.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
out_dev(), etc., as a name is a holdover from before commit 73ac1466fb
("scripts: edtlib: Call nodes "nodes" instead of "devices""). It's
confusing for the same reasons as mentioned in that commit.
Renamings:
- dev_ident() -> node_ident()
- out_dev() -> out_node()
- out_dev_s() -> out_node_s()
- dev_aliases() -> node_aliases()
- dev_path_aliases() -> node_path_aliases()
- dev_instance_aliases() -> node_instance_aliases()
Also clean up comments to talk about nodes instead of devices where it
makes sense.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
should_write() returns False for properties that are skipped in
write_properties(). Shortens write_properties() a bit.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
The
"{" + ", ".join(...) + "}"
pattern is in a bunch of places now. Add an out_dev_init() helper for
it, with the same parameters as out_dev().
Also makes "{" vs. "{ " consistent, picking the first one.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Add a helper function verify_error() to testedtlib.py that takes a DTS
source and verifies that it generates a particular EDTError.
Use it to test the hints that the previous commit added to errors
generated by _slice().
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Show how the element size was calculated in the error message when a
'reg', 'ranges', or 'interrupts' property has the wrong size. This
should help with debugging. Also mention that #*-cells properties come
from the parent node, which can be subtle.
Came up in https://github.com/zephyrproject-rtos/zephyr/issues/21607
(though it seems the comment disappeared).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
