Increase main stack size for next USB device stack config to prevent
stack overflow when FatFs is used. The new main stack size value matches
the value used in old stack mass storage sample config.
Fixes: #55210
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
Microchip XEC devices specify GPIO pin using octal numbering and
organize pins in banks of 32. Chip documentation does not use
bank naming rather naming each pin by its octal number. This has
led to the developer having to calculate the bit position of a pin
in its 32-bit bank when a specifying the pin for GPIO usage. We
created a set of defines for all possible GPIO pins that specify
the DT GPIO bank name used in the chip level DTSI files and the
bit position in that bank.
Signed-off-by: Jay Vasanth <jay.vasanth@microchip.com>
When running the testcase libraries.hash_map.newlib.cxx_unordered_map.djb2
of this samples/basic/hash_map, it appears that some platforms
have a too low stack size.
This PR is increasing that value to pass the testcase.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
LPC55S69 flash requires all writes be in multiples of 512 byte blocks.
Configure littleFS sample for these requirements when building targeting
the LPCXpresso55s69 EVK.
Signed-off-by: Daniel DeGrasse <daniel.degrasse@nxp.com>
If waiting on the first semaphore in the main loop times out, the main
loop starts from the beginning and attempts to start scanning for
broadcast sources. But since the first semaphore was not passed, the
scan_recv_cb callback was not called yet and thus the previously started
scanning was not stopped. As a result, an attempt to start the scanning
will fail with -EALREADY and the main thread will end. To solve this,
-EALREADY is now ignored when checking the return value of
bt_audio_broadcast_sink_scan_start.
Signed-off-by: Ladislav Podivin <ladislav.podivin@tietoevry.com>
Adds REQUIRED to samples and tests for finding the zephyr package
to align all samples and tests with the same call and parameters.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
* ensure Thrift documents are globbed in `modules/index.rst`
* add a "What is Thrift?" section to the Thrift sample
Signed-off-by: Chris Friedt <cfriedt@meta.com>
The "Thrift Layers" image gives a good visual representation
of Thrift in what would otherwise take many words.
Signed-off-by: Chris Friedt <cfriedt@meta.com>
Set the bbc_microbit board as part of the integration platforms, since
the sample is designed for the board and so CI should fail if the sample
no longer builds for it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The sample no longer fits in RAM, reduce the number of discardable
packets to make it fit.
Fixes#55328.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Zephyr supports ADCs with 16-bit resolution, but the ADC sample
displayed readings for such incorrectly due to too-small datatype
This commit fixes the ADC sample for ADCs with 16-bit resolution
Signed-off-by: Ben Marsh <ben.marsh@helvar.com>
The Kconfig symbol CONFIG_SPI_FLASH_AT45 is selected by default if a
compatible device is enabled.
Remove obsolete config entry.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
The Kconfig symbol for CONFIG_SPI_NOR is selected by default if a
compatible device is enabled.
Remove obsolete board config files.
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
Change the samples/boards/stm32/backup_sram to run on the
nucleo_u575 or stm32u585 disco kit where the backup sram is enabled
Press the reset button to see that the content of the backUp SRAM
is not altered.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add a driver implementation that uses the I2S peripheral.
Based off this blog post:
https://electronut.in/nrf52-i2s-ws2812/
Should help with #33505, #29877 and maybe #47780, as there is no garbage
data at the end of transmissions on nRF52832, and no gaps.
Signed-off-by: Jonathan Rico <jonathan@rico.live>
Introduce new USB Mass Storage Bulk-Only Transport implementation
written from scratch. Main goal behind new implementation was to
separate USB and SCSI parts as clearly as possible.
Limited set of SCSI disk commands is implemented in separate source code
file that is internal to USB device stack. While it should be possible
to use the SCSI implementation by other components there is currently no
other user besides USB MSC and therefore SCSI header is kept private.
Signed-off-by: Tomasz Moń <tomasz.mon@nordicsemi.no>
This demo prints out STARVING, HOLDING, EATING, DROPPED, THINKING. The
HOLDING state was missing and the EATING state was placed in the wrong
sequence.
Signed-off-by: Keith Packard <keithp@keithp.com>
Picolibc doesn't have any output buffering for printk, so the various
pieces of the status line would get interleaved between threads. Build the
whole line in memory using snprintk and then print it in a single printk
call.
Signed-off-by: Keith Packard <keithp@keithp.com>
Some features like IP fragmenting are default disabled to keep the network
stack compact for small devices.
In bigger applications as well as for the Maxwell Pro tests it required
to have the full functionality enabled. This can also work as example for
new projects.
Signed-off-by: Sjors Hettinga <s.a.hettinga@gmail.com>
Turn off display_blanking to make it able to refresh on a device
even when blanking default off.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
Remove dependency on usb_device for virtual USB device / hosts sample.
This allows sample to be built in CI.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add support to run the sample on nrf52840dk_nrf52840 using
internal SoC flash, and external mx25 device over QSPI or SPI.
Signed-off-by: Dominik Ermel <dominik.ermel@nordicsemi.no>
This reverts commit 7c00ecbbbf.
Changes introduced in that commit break the Dining Philosophers demo
for the following in-tree platforms:
- actinius_icarus
- circuitdojo_feather_nrf9160
- nrf5340_audio_dk_nrf5340_cpuapp
- nrf5340dk_nrf5340_cpuapp
Fixes https://github.com/zephyrproject-rtos/zephyr/issues/55040.
Signed-off-by: Saku Rautio <saku.rautio@nordicsemi.no>
Since the commit 897d2b8204 ("boards: arm: nrf52840dongle_nrf52840: Use
USB CDC as default UART") this board has the 'cdc_acm_uart' node defined
and selected (with 'chosen' node) as 'bt-c2h-uart' by default. Overlay
file is no longer required.
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
The BT Mesh Configuration Client API is used in an asynchronous manner
and the app key was not added before attempt binding it to mesh models.
This caused the binding functions to fail and resulted in a fail when
trying to to send mesh messages.
This commit registers a callback that is called when the app key is
assigned. After this callback is called, the binding functions are
called.
Signed-off-by: Jonas Remmert <j.remmert@phytec.de>
Adds missing selects for CONFIG_BASE64 for overlays which use
shell/UART transports that were not updated.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
Select in Kconfig causes many issues with dependency loops, this
resolves the issue by replacing most select with depends on for
MCUmgr, including updates to the sample smp_svr application and
tests.
Signed-off-by: Jamie McCrae <jamie.mccrae@nordicsemi.no>
() This makes the stack for both consumer and producer threads
larger to avoid stack corruption and overflow.
() Limit to 1 CPU to preserve ordering of output for twister.
() Remove the platform_exclude as they are passing now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In commit 31e0d86484, the stack size
was unjustifiably changed from a base of *768*
(plus a configurable extra stack size) to *2048*.
This change broke our sample tests for one of our products, which has
less available memory for the threads' stacks.
The stack size is dropped to *1024* to align with the stack sizes
specified in the other samples, which were changed in commit
31e0d86484.
Signed-off-by: Saku Rautio (Ext) <saku.rautio@nordicsemi.no>
Add the overlay file to run the samples/drivers/led_pwm
on the nucelo_u575zi_q board.
Two green leds are used on pc7 and pb7 corresponding to pwm
channels of timers3 and timers4.
The leds node has to be disabled to let the pin for the pwm nodes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Add the overlay file to run the samples/drivers/led_pwm
on the disco_l475_iot1 board. Two green leds are used on pa5 and pb14
corresponding on 2 pwm channels of timers2 and timers15.
The leds node has to be disabled to let the pin for the pwm nodes.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Configure the overlay file to run the samples/drivers/led_pwm
on the nucleo_l073rz and nucleo_f091rc board.
The green led is used on pa5 for pwm channels of timers2 channel
The leds node has to be disabled to let the pin for the pwm nodes.
The spi1 is disabled in that sample to avoid conflict on pa5 pin.
Signed-off-by: Francois Ramu <francois.ramu@st.com>
Only the receiver of the audio is allowed to send the
receiver start ready command.
Furthermore, this removes the automated transition to the
streaming state on the server, as the server now shall
call bt_audio_stream_start to put the stream into the
streaming state.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
New event LWM2M_RD_CLIENT_EVENT_REG_UPDATE to indicate
application that engine starts registration update.
Signed-off-by: Juha Ylinen <juha.ylinen@nordicsemi.no>
Current ipm_esp32 sample code requires esp32_net_firmware.c file
as source input, which is generated after ipm_esp32_net build.
esp32_net_firmware.c was manually added as binary blob, which needs to
be removed from the repository.
This change modifies ipm_esp32 CMakeLists.txt to include the build
output of ipm_esp32_net as input source of ipm_esp32 build, allowing the
binary blob to be removed.
Current approach shall be updated during next release.
Signed-off-by: Sylvio Alves <sylvio.alves@espressif.com>
Disables the initial attestation suite, which we are unable to run
at present due to a license issue with the underlying QCBOR library
which this service depends on in TF-M.
This commit can be reverted once an acceptable solution has been found
for the QCBOR license in TF-M.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Prevents Zephyr from enabling the initial attestation service in TF-M,
due to a dependency it has on an incompatibly-licensed library (QCBOR).
This update checks if either of the following config flags are
enabled at build time:
- `CONFIG_TFM_PARTITION_INITIAL_ATTESTATION`
- `CONFIG_TFM_PSA_TEST_INITIAL_ATTESTATION`
If either of these are set to true, a fatal error will be thrown at
build time, indicating the reason for the failure.
This change can be reverted once a longer term solution to the QCBOR
license issues has been resolved.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This instance might be shared by other users that may have opened it
earlier in the boot chain.
Signed-off-by: Jonathan Rico <jonathan.rico@nordicsemi.no>
The sample is not fully working (yet) and it will be soon replaced.
Remove it to not confuse people.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
