This sample uses the DEVICE_DT_GET_ONE(COMPAT) to select the ps2 device
for a specific chip. This commit changes it to use the aliases to
let more chips which support the ps2 driver can build this sample.
Signed-off-by: Jun Lin <CHLin56@nuvoton.com>
This commit adds a sample application which demonstrates how
to use the new driver and modules. The sample uses power
management to turn on the modem, uses network management
to wait for L4 connected, then uses DNS to get the IP
of the server running the python script found in the
server folder, which echoes back data recevied to it.
A packet containing psudo random data is then sent to
the server, which the echoes it back. To validate the
capability of the driver to restart the modem, the
modem is restarted, and the packet is sent again.
The server is hosted by linode, and uses the domain
name test-endpoint.com
Signed-off-by: Bjarki Arge Andreasen <baa@trackunit.com>
Config CONFIG_NATIVE_UART_0_ON_STDINOUT=y should be applied only for
posix architecture platforms.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Create helper class Shell which can be used in tests which require
interaction with shell application.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Add readlines_until method to DeviceAdapter class to simplify using
adapters in tests by give user possibility to read output from device
until following conditions:
- provided regex was found
- provided number of lines was already read
- timeout was occurred
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
Select and place common code of three adapters (HardwareAdapter,
BinaryAdapterBase and QemuAdapter) into basic DeviceAdapter class.
Introduce new way of reading device output by run separate thread which
try to read device output and place it into internal python queue.
Thanks to this, now it is possible to create readline method for all
adapters, which can be unblock when timeout occur.
Collect all common steps which have to be done before setup device in
launch method. The same was done for teardown operations which were
placed into close method.
Additionally some protection mechanisms were introduced to prevent for
undesirable side-effects when user could try to launch to already
launched device or try to send some data to disconnected device.
iter_stdout method was replaced by two new methods: readline and
readlines. To make it possible to remove all read output from internal
buffer (queue), clear_buffer method was introduced.
Also unit tests were rewritten to work properly with current version
of adapters.
Signed-off-by: Piotr Golyzniak <piotr.golyzniak@nordicsemi.no>
- Remove unnecessary includes
- Remove redundant definitions (sample is not portable anyway)
- Use printf
- Check for device readiness
- Do not check for zero ticks (not possible for the given
timeout/driver), also, driver should likely error for such case anyway
- Check for all error codes
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The connectivity monitoring subfeature of conn_mgr is currently also
named conn_mgr, which is confusing.
This commit renames it to conn_mgr_monitor, or conn_mgr_mon for short,
for clarity.
Signed-off-by: Georges Oates_Larsen <georges.larsen@nordicsemi.no>
Remove the qos field from
bt_cap_unicast_audio_start_stream_param as it was not used.
The QOS values are set when creating the unicast group,
and not when starting the streams.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Replace the `CONFIG_ZBUS_RUNTIME_OBSERVERS_POOL_SIZE` with the
`CONFIG_ZBUS_RUNTIME_OBSERVERS` and add the heap. Add user_data to hello
world sample iterator functions.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Adds a lvgl-button-input pseudo device to the lvgl sample. Triggering the
SDL gpio (pressing 'b') on the keyboard should trigger a click event at the
center of the screen.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Changes all board specific configurations to use the new
zephyr,lvgl-pointer-input compatible. The kscan_input node in the boards
remains to have downstream backwards compatibility.
Signed-off-by: Fabian Blatz <fabianblatz@gmail.com>
Refactor the bt_audio_codec_cfg to use flat arrays to store
metadata and codec specific configurations.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec configurations.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
CONFIG_COVERAGE has been incorrectly used to
change other kconfig options (stack sizes, etc)
code defaults, as well as some samples behaviour,
which should not have dependend on it.
Instead those should have depended on COVERAGE_GCOV,
which, being the one which adds special code and
temporary RAM storage for embedded targets,
require changes to many features.
When building for the native targets, all this was
unnecessary.
=> Fix the dependency.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
The CMSIS module glue code was part of arch/ directory. Move it to
modules/cmsis, and provide a single entry point for it: cmsis_core.h.
This entry header will include the right CMSIS header (M or A/R).
To make this change possible, CMSIS module Kconfig/CMake are declared as
external, allowing us to add a new Zephyr include directory.
All files including CMSIS have been updated.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
This removes odd `subscribe` parameter from bt_tbs_client_discover
function parameters list. As the API user enables specific
CONFIG_BT_TBS_CLIENT_* option, the client implementation should
subscribe to the characteristic notifications so that the user receives
the value updates.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
With gcc from the zephyr sdk and -Wold-style-declaration is giving this
output:
zephyr/arch/arm/core/aarch32/cortex_a_r/fault.c:101:1: warning:
'inline' is not at beginning of declaration [-Wold-style-declaration]
101 | static void ALWAYS_INLINE
z_arm_fpu_caller_save(struct __fpu_sf *fpu)
| ^~~~~~
I searched to all of the source code to find these further occurances
where inline is not at the beginning of a function declaration.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
The XEC clock control driver sample code uses enum indexes to offset to
the desired GPIO CTRL register of the package. These enums are only
used in this example code and are being removed in favor of calculated
indexing into the specific GPIO register memory map.
Signed-off-by: Jeff Daly <jeffd@silicom-usa.com>
Add simple TFTP client code using TFTP client library
Initiate connection (IPv4) with optional DNS resolution
Operate get operation then put operation in octet mode
Tested on native_posix
Issue/Discussion #60985
Signed-off-by: romain pelletant <romain.pelletant@fullfreqs.com>
Remove print_sys_memory_stats() from hash_map example as it is not used
there at all. For sys_heap make this a static function.
Signed-off-by: Florian La Roche <Florian.LaRoche@gmail.com>
Exit the sample if creation of any of the RX threads failed. Name the
threads to aid in debugging and monitoring of this sample.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Increase the stack size of the two RX threads used in the ISO-TP sample
from 512 to 1024 bytes as the former is too small for some CAN
controller/SoC combinations.
Make both the RX thread stack size and priority configurable via Kconfig.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
As the metadata has to be validated anyway, let the initial vaidation of
metadata to be done in ASCS. The application can still reject the
metadata, but the length validation and supported type validation can be
performed by the stack.
Signed-off-by: Mariusz Skamra <mariusz.skamra@codecoup.pl>
The sample will leverage shell_thread function, which is not SMP-safe.
This will cause issues on some SMP platform. Set CONFIG_MP_MAX_NUM_CPUS
to 1 to fix the issue.
Signed-off-by: Jaxson Han <jaxson.han@arm.com>
