NET_TEST is the approprite config for networking tests that do not
require a network device. This has the same effect of disabling
NET_SLIP_TAP, but also disables other network devices. This is required
to disable e1000 Ethernet driver on the qemu_cortex_a53 board.
Signed-off-by: Grant Ramsay <gramsay@enphaseenergy.com>
The benchmark duration is in nanoseconds, and it logs the duration to
the console in seconds. The conversion is wrong for scenarios where
the execution lasts less than 100 milliseconds. Fix that by adding
leading zeros while printing duration.
Signed-off-by: Jilay Pandya <jilay.pandya@zeiss.com>
This commit adds a new sample to zbus that shows how to implement a
confirmed channel. Developers commonly asked about similar features on
zbus discord channel and RFC (in the past). Adding this sample, we can
show developers how to solve their needs (confirmed channels) without
zbus changes.
Signed-off-by: Rodrigo Peixoto <rodrigopex@gmail.com>
Updated the sample to check for lines from the tracing user
implementation to make sure that the glue works.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Let's just let the user implementation to its things, like
checking, locking and stuff.
The tracing_user.c now just acts as a glue.
Moved previous implementation to its sample, and cleaned up
headers.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Instead of printk. This change aligns the sample a bit more to the
canonical "hello world" sample in C. Also, samples should in general be
as portable as possible.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Overall, this makes the sample code much simpler and smaller.
Whit the changes introduced in commit commit 57e0da4d80
("boards: add zephyr,code properties to the various gpio-keys nodes")'
this example will work out of the box with any board that has at least
zephyr,code = <INPUT_KEY_0>; in its devicetree.
Signed-off-by: Johann Fischer <johann.fischer@nordicsemi.no>
Because there are more comprehensive examples in the Zephyr's
example-application repository. Application development samples page now
points to example-application as well.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Because example-application contains relevant sample code related to
application development.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
The default nRF hardware PWM driver is not very suitable for this
sample as that driver does not allow setting a period longer than
~262 ms. Use the nRF SW PWM driver instead. This will also ensure
that the driver is built by CI for nRF52, nRF53, and nRF91 Series.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Since the driver can now be also used on nRF91 Series, its name need to
be updated to not cause confusion.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Instead of sending the user out of the documentation site to GitHub
to read the testing instructions, link to the generated page for the
documentation.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
This follows the same convention that has already been adopted by Intel
Alder Lake and Raptor Lake boards.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add `yd_esp32` board:
- Model name: YD-ESP32
- Manufacturer: VCC-GND® Studio
- Espressif module: ESP32-WROOM-32E
Signed-off-by: Julio Cesar <hi@jcsx.dev>
There is no reason why the capabilities
should be modified by the stack after registration,
nor any reason why a the unicast client application
needs to modify the reported remote capabilities, so
all have been marked as const.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
Refactor the bt_audio_codec_cap to use flat arrays to store
metadata and codec specific capabilities.
The purpose of this is to make it easier to copy the data
between layers, but also to support non-LTV data for non-LC3
codec capabilities.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the sample to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
The broadcast sink API has been modified so that all scanning, etc.
will be done by the application, rather than the stack. This commit
updates the sample to use this updated API.
Signed-off-by: Emil Gydesen <emil.gydesen@nordicsemi.no>
This is following the same convention that was recently introduced to Alder
Lake boards (intel_adl). Additionally, an "S" suffix is added to the
boards, since what's currently supported is in fact the Raptor Lake S
variant.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A sneaky whitespace was causing inconsistent rendering in the list of
available overlays.
Fixed by switching to a list table which is arguably now even easier to
read.
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
Add a config entry specifically for RISC-V runtime.
Memory usage is 7066 bytes.
Also adjust some library options. This make the ARC runtime binary
smaller as well:
before:
FLASH: 8808 B
SRAM: 3672 B
after:
FLASH: 5596 B
SRAM: 3672 B
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Remove unneeded board configurations since those now selected with
selecting PCH SMBUS driver.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
TC "test_single_shot_alarm_notop" is failing because there were 2 ISR
callbacks instead of one. this is because of invoking
ifx_cat1_counter_set_int_pending incorrectly. Updated
ifx_cat1_counter_set_alarm to fix this
Signed-off-by: Sreeram Tatapudi <sreeram.praveen@infineon.com>
Since 3a197934fc
main() should be int main(void) instead of void main(void)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Since 3a197934fc
main() should be int main(void) instead of void main(void)
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add an optional compare buffer to check each byte. If the byte differ
the read value will be printed as an error.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
Add an optional compare buffer to check if bytes read
match a provided buffer and print an error if they differ.
Signed-off-by: Jeppe Odgaard <jeppe.odgaard@prevas.dk>
The DTC_OVERLAY_FILE variable is specified on the command line.
It's not preferable to set it in CMakeLists.txt.
The app.overlay file is used as the default overlay file, so use it.
Signed-off-by: TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
This board is a relatively inexpensive development kit for USB-PD
controllers, using an UPD301C controller.
This Zephyr config includes support for:
* UART (present on he debug header of the board), tested with the
hello_world sample application;
* the one standalone LED (CAP_MIS), tested with the blinky sample
application;
* the rotary encoder (PDO_SEL), via ADC, tested with the adc sample
application;
* the current sense amplifier (I_SENSE), currently untested;
* the SPI bus, connected internally in the UPD301C to the UPD350;
* the I2C bus, exposed on the debug header, currently untested.
Note that the drivers.uart.async_api.rtt has to be disabled, as it is
for other m0 boards with no dma or it fails to build.
Signed-off-by: Diego Elio Pettenò <flameeyes@meta.com>
Add support for apollo4p_evb to the counter alarm sample.
Signed-off-by: Mateusz Sierszulski <msierszulski@antmicro.com>
Signed-off-by: Maciej Sobkowski <msobkowski@antmicro.com>
