The seasonal overhaul of test identifiers aligning the terms being used
and creating a structure. This is hopefully the last time we do this,
plan is to document the identifiers and enforce syntax.
The end-goal is to be able to generate a testsuite description from the
existing tests and sync it frequently with the testsuite in Testrail.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This commit removes the CMakeLists.txt file for the stale 'random'
driver sample.
The 'random' driver sample was previously renamed to 'entropy'.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
The definition was removed in commit 7ccc7889fa ("logging: Remove
SYS_LOG implementation").
Adding detection of unused symbols in samples and tests to CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
In order to enable sample to be run and evaluated in sanitycheck,
add a harness_config to validate sample output:
- Add "regex" to match on sample output
- Add "timeout" to save some time when debugging
- Add "ordered" instruction. Since sample is running a while loop
test verdict can potentially be computed on previous run output,
issuing a wrong status.
Last, since sanitycheck regex does not play well them, rework
sample to output without parenthesis.
Tested on disco_l475_iot1
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Some of defines are present in several header files.
Those defines are the same with value but with different naming.
Common defines are brought to usb_common.h
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
echo_client and echo_server configuration for 802.15.4 and OpenThread is
covered by overlay files and default board configuration. Board-specific
configuration for frdm_kw41z was redundant in this case.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
This adds a README.rst for the UP Squared board GPIO counter sample
using details in the application source code and giving context.
This offers overview, requirements, and instructions to build and
flash, in complement to the cited reference.
Signed-off-by: Jennifer Williams <jennifer.m.williams@intel.com>
The sensor API returns the temperature in celsisus degree. The Bluetooth
temperature characteristics uses M = 1, d = -2, b = 0, which corresponds
to a resolution of 0.01 degree. This means that the value returned by
sensor_value_to_double has to be multiplied by 100.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The mesh_badge sample uses a GATT Characteristic instead of a Mesh
Device Property to report the temperature. In addition to that the
status message is filled with with a GATT Unit instead of a the Mesh
Device Property.
Fix that by reporting a Present Device Operating Temperature, ie 0x0054
instead. This has the advantage of keeping the an s16t value to report
the temperature. This however change the marshalled format from B to A.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
When the value of an unknown sensor property ID is requested, the length
field should represent the value of zero, as explain in the comment in
sens_unknown_fill. However the marshalled representation of a zero
length is wrong in the code. The format A uses a 1-based uint4 length
value, so the range 0x0–0xF represents the range 1-16. The zero length
is represented by format B using the 0x7F value.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
The functionality of samples/drivers/gpio sample application duplicates
already existing code in samples/basic/blinky and samples/basic/button.
This commit removes the gpio sample application.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
Bool symbols implicitly default to 'n'.
A 'default n' can make sense e.g. in a Kconfig.defconfig file, if you
want to override a 'default y' on the base definition of the symbol. It
isn't used like that on any of these symbols though.
Also replace some
config
prompt "foo"
bool/int
with the more common shorthand
config
bool/int "foo"
See the 'Style recommendations and shorthands' section in
https://docs.zephyrproject.org/latest/guides/kconfig/index.html.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Removes redundant and invalid configurations from the bluetooth/mesh
sample. Removes some stale disabled config entries.
Fixes L2CAP related warning in config step of sample.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Switch to using the synchronous bt_init call before starting the main
loop in the peripheral samples. This is to avoid sending notifications
before bluetooth has been properly initialized.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The following samples:
- boards/nrf91/nrfx
- boards/nrf52/power_mgr
are actually not specific to nRF91 and nRF52 Series SoCs, respectively,
hence the current naming of the above board/ subdirectories may be
misleading. Thus, use nrf/ directory for holding all nRF board specific
samples that apply to several boards.
Paths to the moved samples that are mentioned in their documentation
are also updated accordingly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This define is not of use anymore since there's a global net_buf user
data Kconfig variable and its definition already guarantees a
sufficient minimum for Bluetooth.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For some reasons SOC_SERIES_SAME70 was selected in civetweb sample,
which prevents build on other platforms.
This issue was silent since sample yaml file limits sample testing on
sam_e70_xplained.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
echo_server crashes if the coverage is enabled due to the insufficient
stack size.
Use bigger stack size when the coverage is enabled.
Fixes#20797
Signed-off-by: Oleg Zhurakivskyy <oleg.zhurakivskyy@intel.com>
Use malloc/free instead of k_malloc/k_free in operator new/delete
implementation or use libstdc++ implementation when available.
Further updated cpp_synchronization sample to enable minimal libc heap
as virtual destructor requires operator delete which depends on free.
Signed-off-by: Jan Van Winkel <jan.van_winkel@dxplore.eu>
Corrected & improved transition implementation so that
no_transition_work thread will not get triggered twice at the
end of transition.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
User can set transition time as Zero & delay as non-zero value.
In that case, we have to depend upon timer.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
On LSM6DSO sensor the INT1 pin is used for both generating the drdy
interrupt and for switching to I3C hotjoin mode just after reset if
it is at logical '1' level. If you reset the x_nucleo_shield3 board
the LSM6DSO enter in hot join, as INT1 '1' level is preserved by
the level shifter.
This commit switch to INT2 to generate DRDY interrupt, so that INT1
always remain to logical '0' level.
Fixes: #20933
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This test is failing on platforms requiring a bigger stack size. This
issue is fixed by adding the missing CONFIG_TEST_EXTRA_STACKSIZE to
tweak the thread stack size.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Fix scanning so that we always use active scanning in case the UUID we
are looking for is in the scan response, and disable duplicate filtering
to handle devices that modify their advertising data at runtime, such as
smartphones reacting to apps being opened and closed.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Update the sample to indicate which device it was using, which helps
mitigate the existing problems identifyin Arduino I2C buses. Also
output a summary of results so cases where no devices are found
provide output after the Starting... line.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
It is important to clarify when to launch audio capture command in
order to avoid that initial boot characters enter into the audio
file leading to bad initial data.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
As noted in the issue #20666 discussion, though the console is not used
by this sample app, it can't really be "disabled" using this Kconfig
option, so remove the CONFIG_SERIAL=n line.
Fixes: #20666
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Some architectures require more space on the stack when running samples
and tests. Use the CONFIG_TEST_EXTRA_STACKSIZE also on the philosophers
sample to deal with such cases.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
A reference to CONFIG_CAN_AUTO_BOFF_RECOVERY was added in commit
1b88658f9f ("samples: driver: Extend CAN sample"), but it's never been
defined as a Kconfig symbol.
Should have been CONFIG_CAN_AUTO_BUS_OFF_RECOVERY according to
alexanderwachter, so change it to that.
Adding detection of unused symbols in samples and tests to CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Corrected spellings in printk messages plus removed
unnecessary blank lines.
In case of Gen. Move client's message to Server, reduced
values of delta & transition time to improve demonstration.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
The device address can only be 0x18 through 0x1F. C6 is connected to
the FXOS870 and is not exposed on a header: switch to Arduino D0.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The i2c_msg API details do not work correctly with Nordic TWI. Switch
to the higher-level and simpler API for register read and write. Also
add a tree configuration on a Nordic-based board.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
Commit 16d8ce519c introduced changes
that caused this sample to no longer behave according to documentation
and for some hardware to no longer work at all.
On nRF51 SoCs for instance, the reported number of cycles per second
is 16M, what makes the calculated max_period and min_period to be 16
and 0 microseconds, respectively, what effectively makes it impossible
for the sample to return to the initial blinking frequency. Moreover,
with such short PWM periods, the blinking is not even noticeable.
This patch partially reverts the changes mentioned above, and instead
of calculating max_period and min_period basing on the reported clock
rate, it tries to only decrease the max_period if needed, accordingly
to what the used hardware can handle.
Documentation is also updated to mention the possible change in
observed behavior of the sample on some hardware.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Name convention for nordic USB driver changed
Kconfig files for custom boards have to be udapted accordingly.
Changes affect only name convention change.
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
By adding new SoC to Zephyr drivers has to be updated.
Commit affects:
- USB driver
- support for nRF52833 added.
- support for USB_DEVICE_REMOTE_WAKEUP in hid-mouse added.
- SPI
- IEEE 802.15.4
- CLOCK CONTROL
Signed-off-by: Emil Obalski <emil.obalski@nordicsemi.no>
There are compiler error about the entry functions of two threads
not returning anything. So add return statement to fix it.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Removed unnecessary global variable & replaced them with different
variable defined in struct light_ctl_state.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
