Update zephyr side to handle hal_nxp using cmake-ext/kconfig-ext. This
allows for having zephyr specific integration code live with the zephyr
source tree.
For now on the cmake side we just use add_subdirectory() of the hal_nxp
repo so the integration is effectively transparent.
For Kconfig we add a place holder Kconfig file since the hal_nxp repo
doesn't have any Kconfig files in it currently.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit increases number of available serialization buffers to
account for possible delays caused by serialization itself and
processing on the application core.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This commit reworks nRF IEEE 802.15.4 temperature update module to save
resources, otherwise used to create thread, by using work queue.
Signed-off-by: Paweł Kwiek <pawel.kwiek@nordicsemi.no>
This commit extends size of stack used by IEEE 802.15.4 radio
temperature sensor. This commit fixes stack overflow issue in
echo_server sample for OpenThread.
Signed-off-by: Przemyslaw Bida <przemyslaw.bida@nordicsemi.no>
A new configuration is available in TF-M, for disabling RNG
independent from key derivation. Introduce a corresponding
Kconfig option to control the RNG API enabling/disabling from
Zephyr.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Allow developers the option of using the DOWNLOAD option
for MCUboot in TF-M bulds with BL2. Using MCUboot from
Zephyr is still the default option.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
TFM_MCUBOOT_IMAGE_NUMBER Kconfig option should have
a dependency on TFM_BL2, since it is not applicable
otherwise.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We remove the tfm-mcuboot module in Zephyr (which hosts the
mcuboot version that is used for TF-M builds in Zephyr). We
will force TF-M builds in Zephyr to use the MCUboot version
that any Zephyr builds are using. This will allow Zephyr to
maintain a single mcuboot module version in its default
manifest.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
For TF-M builds on LPCXPRESSO55S69 we set the path to the
NXP HAL sources that are required for building TF-M for this
platform.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Upstream TF-M has modified the path name for ARM platforms,
so we fix the board names in the module integration code.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds temperature platform used by the IEEE 802.15.4 Radio
Driver. The new platform requires an enabled temperature sensor.
The new hal_nordic revision updates the nRF 802.15.4 component.
Signed-off-by: Pawel Kwiek <pawel.kwiek@nordicsemi.no>
This commit introduce new HAL Telink module used by
new Telink B91 RISC-V platform drivers.
Signed-off-by: Yuriy Vynnychek <yura.vynnychek@telink-semi.com>
This commit updates the NS board variant from
`nrf9160dk_nrf9160ns` to `nrf9160dk_nrf9160_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit updates the NS board variant from
`nrf5340dk_nrf5340_cpuappns` to `nrf5340dk_nrf5340_cpuapp_ns`
to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
This commit update the NS board variant from `bl5340_dvk_cpuappns`
to `bl5340_dvk_cpuapp_ns` to maintain consistency across zephyr.
Signed-off-by: Kevin Townsend <kevin.townsend@linaro.org>
Add Kconfig option for indicating that a given SoC contains the NXP
Kinetis Reset Control Module (RCM).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Rename the top-level header file from <canbus/canopen.h> to
<canopennode.h>.
Rename CANopenNode related Kconfig options from CONFIG_CANOPEN* to
CONFIG_CANOPENNODE*.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Move the Zephyr-specific interface and support code for CANopenNode into
the modules directory. Consolidate the CMakeLists.txt files into one.
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
Since we now have separate Kconfig symbols for the different
MPS2 AN521 board variants, we need to update the BOARD switch
for the TF-M target on MPS2 AN521.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The current CMakeLists.txt contains a function that is called from
the same file.
This patch removes the abstraction, allowing to remove many
lines of parameter handling.
Additionally, with this patch, the Cmake argument handling is now
done via a list, which removes many more named variables.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
- Fixed some incorrect streamport references that pointed to the
base streamport files instead of those dedicated for Zephyr.
- Updated the source file compilation to match the updated
TraceRecorder module.
Signed-off-by: Torbjörn Leksell <torbjorn.leksell@percepio.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the LoRaMac-node library to the last stable release and fix
the Zephyr glue code to match it. Move CMakeLists.txt to the main
Zephyr repository to simplify loramac-node module maintenance.
Signed-off-by: Ilya Tagunov <tagunil@gmail.com>
The CMake variable `TFM_ISOLATION_LEVEL_ARG` was not properly set when
application configures higher isolation level. This led to isolation
level always being to set 1.
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
Fixes: #36101
The move of CMake invocation to a dedicated custom target, see #34868
results in tfm_cmake to always be considered out-of-date, causing CMake
to be reinvoked in the TF-M Binary dir, which again results in the
build command to rebuild.
This commit moves the invocation to a custom command with the
CMakeCache.txt as output. The custom target tfm_cmake is updated to
depend on CMakeCache.txt.
This mean that CMake for TF-M will only be invoked inside the Zephyr
build command if that file is missing.
If the CMakeCache.txt file is updated or TF-M CMake or source code is
modified, then the build command inside the TF-M build folder will
ensure correct re-run of CMake from within the TF-M build folder.
This ensures that TF-M will still rebuild if TF-M code is modified,
while at the same time avoid unnecessary rebuilds of TF-M code.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
We do not need the if BUILD_WITH_TFM guard in the main
Kconfig file, as the guards are present insude the respective
Kconfig files that are sourced by the main Kconfig.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
The TF-M project is higly configurable and we end up having
a growing number of Kconfig option definitions in the main
Kconfig file. This commit splits out the configuration options
for the TF-M partition and for the crypto partition configuration
into separate Kconfig files, for ease of reading. The commit
does not introduce behavioral changes.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Also, this eases readability.
The new API can be used any time all FP registers must be manually
saved and restored for an operation.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
When running with TFM Regression option set, but without
BL2 (MCUboot) we need to use the TF-M's NS binary, and not
the Zephyr application. This was selected properly for the
case with MCUboot boot already, but not when running the
regression tests without MCUboot.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
These are needed to disable not needed crypto modules in
the trusted-firmware-m module.
Signed-off-by: Håkon Øye Amundsen <haakon.amundsen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Zephyr SDK is not supported on OS X, however, Zephyr toolchain can be
built on OS X using Crosstool-NG.
Currently, trusted-firmware-m CMakeLists.txt only supports `zephyr` and
`gnuarmemb` toolchains which prohibits building TF-M on OS X using
Zephyr toolchain built with Crosstool-NG.
docs:
https://docs.zephyrproject.org/latest/getting_started/toolchain_3rd_party_x_compilers.html#crosstool-ng
Signed-off-by: Devaraj Ranganna <devaraj.ranganna@linaro.org>
The caller saved registers were restored both as caller saved and
callee saved registers, i.e. register 0-15 were restored into
both register 0-15 and 15-31.
Signed-off-by: Øyvind Rønningstad <oyvind.ronningstad@nordicsemi.no>
Currently the MBEDTLS_HAVE_TIME_DATE mbedTLS option is enabled based on
the CONFIG_POSIX_API option. This doesn't seem right, since the enabling
the POSIX API does not guarantee that there is a valid time source in
the system. This was the case for the qemu_x86 platform, where enabling
POSIX_API caused TLS handshake failures due to certificate validation
errors caused by no valid time avaialble in the system.
Fix this by adding a specific KConfig entry for date/time configuration
in mbedTLS. Applications that need to enforce date verification in
mbedTLS should enable it explicitly instead of relying on the
non-obvious implicit configuration.
Fixes#35401
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The nRF SOCs declare support for SWO using the HAS_SWO define. In
addition, the SWO pin has to be configured at runtime, which is done
through the Nordic HAL by defining ENABLE_SWO.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Follow-up: #34868
The CMAKE_ARGS was accidentally lost during work on #34868.
This commit fixes that by re-adding `CMAKE_ARGS` as multi value arg.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Follow-up: #34843
This commit is a followup to PR #34843.
The Zephyr subsys/tracing/Kconfig file has a
`depends on ZEPHYR_TRACERECORDER_MODULE` but that symbol is only
available when the module is part of the manifest.
This commit adds the second part of the comment:
https://
github.com/zephyrproject-rtos/zephyr/pull/34843#discussion_r628154265
To ensure all Kconfig symbols are defined.
Without this commit, users without TraceRecorder will see following
checkpatch error:
```
ERROR : Test KconfigBasic failed: Undefined Kconfig symbols:
warning: undefined symbol ZEPHYR_TRACERECORDER_MODULE:
- Referenced at subsys/tracing/Kconfig:35:
config PERCEPIO_TRACERECORDER
bool "Percepio Tracealyzer support"
select THREAD_NAME
select INIT_STACKS
select THREAD_MONITOR
depends on ZEPHYR_TRACERECORDER_MODULE && <choice>
```
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Now using CONFIG_MBEDTLS_USER_CONFIG_FILE instead of
CONFIG_MBEDTLS_USER_CONFIG_ENABLE for inclusion of user config file.
The Kconfig MBEDTLS_USER_CONFIG_ENABLE setting now now determines if
MBEDTLS_USER_CONFIG_FILE is visible.
This removes the problem of MBEDTLS_USER_CONFIG_FILE to be stuck on its
first value.
Users can use MBEDTLS_USER_CONFIG_ENABLE to get the prompt and define
their own value.
As the CONFIG_MBEDTLS_USER_CONFIG_FILE is default promptless then we can
use this setting directly as it will only be defined if another Kconfig
file specifies a default value to use, or user enables:
MBEDTLS_USER_CONFIG_ENABLE.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Introducing MBEDTLS_PROMPTLESS and CUSTOM_MBEDTLS_CFG_FILE settings.
The MBEDTLS_PROMPTLESS can be set to true whenever configuration of
mbedTLS is done from a subsystem or module.
Such an example is OpenThread, which selects mbedTLS for some predefined
crypto settings using OPENTHREAD_MBEDTLS=y.
Unfortunately, extensive use of select can easily cause stuck symbol
syndrome making it harder than neccesarry for users to later reconfigure
as they easily get stuck in incompatible configurations.
Providing a MBEDTLS_PROMPTLESS allows such configurations to disable the
MBEDTLS prompt itself when selected but avoid stuck symbol if user
select another security configuration.
Similar with CUSTOM_MBEDTLS_CFG_FILE which ensures that user must
explicitly select this symbol before providing a custom mbedTLS config
file.
Today, other parts the Kconfig tree may set a default value for
MBEDTLS_CFG_FILE but that value is stuck and thus changed Kconfig
selections elsewhere in the tree will not adjust the value.
Introducing CUSTOM_MBEDTLS_CFG_FILE ensures it is known when the user
has provided the value.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit removes the prompt from MBEDTLS_USER_CONFIG_FILE unless
MBEDTLS_USER_CONFIG_ENABLE is true.
This fixes issues where other parts would specify a default value for
MBEDTLS_USER_CONFIG_FILE that would become stuck and not updated if
user re-configured the system using menuconfig.
Disabling the prompt ensures that only when a user specifically enables
MBEDTLS_USER_CONFIG_ENABLE and specify a custom user value in
MBEDTLS_USER_CONFIG_FILE the setting will be fixed.
Also updates the manifest with related change in the mbedtls project.
Signed-off-by: Torsten Rasmussen <Torsten.Rasmussen@nordicsemi.no>
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This Mbed TLS configuration option was being selected based on a
non-existent Kconfig option, and hence would never be defined. v2.1 of
PKCS1 was published in 2003. Use of v1.5 has been deprecated since
2016, and should not be used in new or existing designs.
Enable the v2.1 version in any situation where RSA is used for
signatures. In the future, we should disable v1.5 entirely, but only
after all uses have been determined and possibly corrected.
No significant weaknesses have been found in v1.5, however v2.1 has a
significant security proof. However, v2.1 does require an entropy
source, which may be an issue in some embedded device situations (which
likely are problematic for other cryptographic reasons).
Signed-off-by: David Brown <david.brown@linaro.org>
Instead of exposing publicly the TF-M NS interface include
directories, we include them when we build relevant projects.
This is required, as the TF-M include directories contains
psa crypto sources that are also provided by the mbedtls
crypto module. The downside of this solution is that the
TF-M includes need to be added explicitly in each application
that uses TF-M APIs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Define the MBEDCRYPTO_PATH variable for the TF-M build,
so the latter can used a checked-out version of mbedtls,
instead of pulling an external tree during build time.
This will make Zephyr builds with TF-M must faster.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Updates in CMakeLists.txt to reflect the restructuring
in the module directory. This also bumps mbetls version
to 2.26.0.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
