First commit to support serial driver running on r_sci_uart for Renesas
RA devices.
Signed-off-by: The Nguyen <the.nguyen.yf@renesas.com>
Signed-off-by: Duy Phuong Hoang. Nguyen <duy.nguyen.xa@renesas.com>
In order to mitigate side channel attacks, even if the PWE is found the WPA
supplicant goes through full iterations, but in some low-resource systems
this can be intensive, so, add an option to exit early.
Note that this is highly insecure and shouldn't be used in production
Signed-off-by: Gang Li <gang.li_1@nxp.com>
This should be configurable by applications in case a full CLI interface
to the WPA supplicant is needed.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
Now retained_mem driver can utilize nrfx_ram_ctrl helper
for nRF devices. It provides abstraction over various RAM retention
peripherals like POWER, VMC or MEMCONF.
Signed-off-by: Nikodem Kastelik <nikodem.kastelik@nordicsemi.no>
Allows RTT inizialization function to either init Cntrol Block always
or initialize only after checking it it's not already initialized by
another program, typically by a bootloader.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
Allows optionally placing Segger RTT data either in a specific
linker section that is located at RAM start, or in a specific linker
section defined by a memory region in DTS, as third and fourth
alternative to the DTCM section or the default data section.
This is useful to share the fixed address for different programs,
typically bootloader and application, and have seamless logging.
Signed-off-by: Giancarlo Stasi <giancarlo.stasi.co@gmail.com>
User can assign callback function to local domain dvfs handler
and get notification when scaling process is finished for
particular domain.
Reworked usage of DVFS_SERV_HDL_FREQ_CHANGE_IN_PROGRESS_BIT_POS
which was not initialized properly.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
Wi-Fi shell now uses _sta/_ap APIs to getch specific inteface types, so,
by default register as a Station.
This needs more work to handle multiple modes and mode switching.
Signed-off-by: Chaitanya Tata <Chaitanya.Tata@nordicsemi.no>
This is required since NRF_FUN_POS (pinctrl) has changed its position
from 17 to 18 (a value hardcoded in the nrf-regtool as well).
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Remove the duplicate `USE_STM32_HAL_RAMCFG` Kconfig symbol definition
from Kconfig.stm32, which was introduced by accident in PR #66181,
commit 6ed002ddae.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
1. Support USB-C drivers TCPC, PPC, and VBUS with UTCPD H/W IP
2. UTCPD is interconnected with Timer-triggered EADC for updating
VBUS/VCONN voltage periodically
Signed-off-by: Chun-Chieh Li <ccli8@nuvoton.com>
Remove the ‘HAS_MCUX_ACMP’ Kconfig, and also remove it from
driver and soc Kconfig files. It is not needed since we already
depend on 'ACMP' enabled in the dt file, the 'HAS_MCUX_ACMP'
kconfig is a relic of the past before devicetree was stable.
Signed-off-by: Anke Xiao <anke.xiao@nxp.com>
Add a void *user_data pointer to the input callback structure. This is
useful for driver to get back the driver data structure and avoid
defining wrapper functions.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
Packets are routed between OT and Zephyr net stacks.
For IPv4 these packets are managed by NAT64 by default.
Signed-off-by: Marcin Gasiorek <marcin.gasiorek@nordicsemi.no>
Changes the ramp-up time from 1000us to 550us
on nRF54H20.
The time must fit inside general preconditions ramp up.
The hfclk time can be adjsuted this way because
the current solution is not precise until
the clock_control is available.
Signed-off-by: Piotr Koziar <piotr.koziar@nordicsemi.no>
WIFI_REASON_DISCONN_UNSPECIFIED is 1, when disconnect reason is 0,
wpas_to_wifi_mgmt_disconn_status return the
WIFI_REASON_DISCONN_UNSPECIFIED and print error log "Disconnection
request failed (1)"
Signed-off-by: Gaofeng Zhang <gaofeng.zhang@nxp.com>
It looks like nrf-regtool depends on the
https://pypi.org/project/devicetree/ Python package, which contains an
old copy (https://github.com/zephyrproject-rtos/python-devicetree) of
the in-tree devicetree package.
Because no major changes have happened in the devicetree scripts, this
likely went unnoticed. However, realized today that such old package is
not able to parse bindings with multiple buses (e.g. in I3C, where we
have `bus: [i3c, i2c]`).
While a proper solution is discussed, inject `PYTHONPATH` with the
in-tree library.
Signed-off-by: Gerard Marull-Paretas <gerard@teslabs.com>
Rename `MBEDTLS_PSA_CRYPTO_RND_SOURCE`->`MBEDTLS_PSA_CRYPTO_RNG_SOURCE`
as all other options use `RNG` for random number generator instead of
`RND` for random number.
Signed-off-by: Jordan Yates <jordan@embeint.com>
When multicast packet is forwarded to the OpenThread stack it has to
have its "multicast loop" flag enabled to be processed by the stack
itself instead of only propagating it further.
Signed-off-by: Konrad Derda <konrad.derda@nordicsemi.no>
As of v2.1.0 TF-M has updated to CMSIS v6 and switched from hosting
the sources to depending on the upstream repository, cloning it at
build time.
To prevent a download from happening during the build, CMSIS v6 sources
are pushed to Zephyr's fork of TF-M and the `CMSIS_PATH` CMake variable
is set to point to them.
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Make it depend on MBEDTLS_PSA_P256M_DRIVER_ENABLED instead of
selecting it.
This fixes the build of
tests/crypto/secp256r1/crypto.secp256r1.p256-m_raw on filtered-out
platforms since PR #75441 (83cd9f5a01).
Signed-off-by: Tomi Fontanilles <tomi.fontanilles@nordicsemi.no>
Fix builds with `CONFIG_TFM_MCUBOOT_IMAGE_NUMBER=1`. The merged binary
should be signed with the same argumements as a secure build, not a
non-secure build, except with a different layout file generated by the
TF-M build system.
Fixes#68345.
Signed-off-by: Jordan Yates <jordan@embeint.com>
Currently, the NFCT pins cannot be used as GPIOs on the nRF54L15 MCU
because the Nordic HAL for this MCU uses the new upcoming `NRF_CONFIG_`
style configuration settings for this MCU.
To support all nRF5x MCUs, the old configuration is still required
because Nordic didn't update their MDK entirely to the new style.
Signed-off-by: Stefan Schwendeler <Stefan.Schwendeler@husqvarnagroup.com>
In function nrfs_backend_send_work tx_data buffer was
used in function ipc_service_send instead of
data_to_send. This is fixed and also tx_data and rx_data
are moved to coresponding functions preventing such
issues in future.
Signed-off-by: Lukasz Stepnicki <lukasz.stepnicki@nordicsemi.no>
