Add a callback to the Health Client Model context, so that the
application is able to receive Health Current Status messages that
some Health Server Model publishes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the needed Health Client API for sending Health Fault Get, and add
a command to the shell to utilize it.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
- Renaming NET_L2_RAW_CHANNEL to NET_RAW_MODE
- Create a generic IEEE 802.15.4 raw mode for drivers
- Modify the IEEE 802.15.4 drivers so it passes the packet unmodified,
up to code using that mode to apply the necessary changes on the
received net_pkt according to their needs
- Modify wpanusb/wpan_serial relevantly
Fixes#5004
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
After the Publish Retransmit state was introduced the Publish Period
measurement would begin once the previous Publish message has finished
transmitting. This will however cause inaccurate periods, which is
particularly an issue with the PTS that expects accuracy of less than
0.5 seconds (apparently).
Since the publication timer is also used for the retransmissions we
can't simultaneously use if for the period as well. Therefore, we
introduce a new variable called period_start which makes a note of
when the period was supposed to start, and then once all
retransmissoins are done initializes the timer with the send duration
taken into account.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The only generally available model supporting publication that's
convenient to be used for testing is the Health Server Model.
Unfortunately since this model supports period publication, the
non-periodic side got less attention and had some bugs.
The first thing that needs to be done is to verify that the period
returned by bt_mesh_model_pub_period_get() is positive. If it's zero
then no periodic publication should take place.
Another thing that this patch cleans up is the naming of the callback
used for periodic publishing. There's no need do require the callback
to call bt_mesh_model_publish() since this must happen no matter what,
so instead rename the callback from 'func' to 'update' and have the
access layer call bt_mesh_model_publish() if the callback was
successful.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In case K_POLL_STATE_NOT_READY is set the return will be set to -EINTR
indicating that the poll was interrupted.
Fixes#5026
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The Del and Overwrite operations have the exact same parameters and
expected status response as the Add operation, so we can reuse most of
the code.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Model publication was broken in a couple of ways:
- The Publish Retransmit State was not taken into account at all
- Health Server used a single publish state for all elements
To implement Publish Retransmit properly, one has to use a callback to
track when the message has been sent. The problem with the transport
layer sending APIs was that giving a callback would cause the
transport layer to assume that segmentation (with acks) is desired,
which is not the case for Model Publication (unless the message itself
is too large, of course). Because of this, the message sending context
receives a new send_rel ("Send Reliable") boolean member that an app
can use to force reliable sending.
Another challenge with the Publish Retransmit state is that a buffer
is needed for storing the AppKey-encrypted SDU once it has been sent
out for the first time.To solve this, a new new net_buf_simple member
is added to the model publication context. The separate 'msg' input
parameter of the bt_mesh_model_publish() API is removed, since the
application is now expected to pre-fill pub->msg instead.
To help with the publishing API change, the Health Server model gets a
new helper macro for initializing the publishing context with a
right-sized publishing message.
The API for creating Health Server instances is also redesigned since
it was so far using a single model publishing state, which would
result in erratic behavior in case of multiple elements with the
Health Server Model. Now, the application needs to provide a unique
publishing context for each Health Server instance.
The changes are heavily intertwined, so it's not easily possible to
split them into multiple patches, hence the large(ish) patch.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The Model Publish Retransmit Interval is in units of 50ms and not 10ms
like the other transmit/retransmit states. Create dedicated macros for
the Publish Retransmit State and use them where appropriate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There's no need for callback exposed in the public API to be something
different than what's used internally. In fact this would just
complicate things. This patch exposes the internal callback under a
bt_mesh_adv_cb name and uses it throughout the mesh stack.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add in6addr_any and in6addr_loopback which are defined in RFC2553 Basic
Socket Interface Extensions for IPv6.
Signed-off-by: Aska Wu <aska.wu@linaro.org>
Implement API to validate user buffer. This API will iterate
all MPU regions to check if the given buffer is user accessible
or not. For #3832.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This simplifies the API since there is no-longer a need to pass a huge
number of function arguments around.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is a temporary hack until #5006 is resolved (possibly using
https://github.com/zephyrproject-rtos/zephyr/issues/5006
Unit testing (BOARD == unit_testing) doesn't need the system call
definitions. Because we foward declare with __syscall them as "static
inline" (from common.h), the compilers will complain that the
definition is missing.
Change to only define __syscall as "static inline" if we are not
builing a unit test to avoid said warnings.
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
The Doxygen comments for the flash API refer to page and sector
interchangeably, without defining either. Fix the coments by providing
a definition of page and using that word consistently.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
10 seconds is quite long for configuration messages, and way too much
currently since we only talk through the local networking interface.
Set the default timeout to 2 seconds, and provide APIs through which
the timeout may be changed at run-time (mainly useful for the shell).
Note: The timeout_set() API is normally assumed to be called just once
for an application, based on the expected size of the network (hops &
latency). Trying to change it e.g. in a multi-threaded environment for
every message may not yield the expected results.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It may be useful for the app to know what the initial NetKeyIndex that
it was given during provisioning is.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This is in anticipation of soon adding health client support, which
could then cause confusion due to the ambiguous API names.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Now that there's support for configuration client as well, rename cfg
to cfg_srv to avoid any confusion.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add the ability to track the provisioning bearer through an extra
parameter to link_open/close. Also introduce new public functions to
enable/disable specific provisioning bearers. This also means that one
now needs to explicitly enable provisioning bearers after calling
bt_mesh_init().
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The command name and a shortened form of valid parameters is not
necessarily enough to understand its usage. Add the option of
providing a more lengthy description of the command usage.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This function wasn't working on systems that enabled the stack
sentinel as the first 4 bytes of the stack buffer contain the
sentinel value for thread stacks.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The new mem pool implementation has a hard minimum block size of 8
bytes, but the macros to statically compute the number of levels
didn't clamp, leading to invalid small allocations being allowed,
which would then corrupt the list pointers of nearby blocks and/or
overflow the buffer entirely and corrupt other memory.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
