It is faster to operate directly on flash_area pointer instead
of fetch it all the time using the fcb flash area id.
Also as f_area_id was needed only for get appropriate flash_area
pointer, so it is better to pass it only while initialization
the fcb and not store it in fcb instance data at all.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Previously flash_area structure was the parameter for the callback
function for transferring sector location info.
Now flash_sector is used so relevant flash_area is missing for
the callback.
This patch introduces structure fcb_entry_ctx which incorporates
entries' location and relevant flash area. It is used to pass complete
information to the callback. Additional pointer to the flash_area fcb
speeds up operations.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Prior to this commit: `struct fcb` contained a pointer to an array of
`struct flash_area`. Each entry in the array represented a flash sector
that the fcb comprised.
After commit: `struct fcb` contains a pointer to an array of `struct
flash_sector`, not `struct flash_area`.
Rationale: The FCB needs to know which sectors it occupies for its
rotate operation. However, the `flash_area` type is meant to represent
a collection of sectors, not a single sector. `struct flash_area`
contains information that the fcb does not need (e.g., area ID and
device ID). Furthermore, the flash_map API provides a means of
converting a flash area ID to an array of sectors
(`flash_area_get_sectors()`), but no way to convert to an array of
areas.
Signed-off-by: Christopher Collins <ccollins@apache.org>
This patch adds the generation and incorporation of privileged stack
regions that are used by ARM user mode threads. This patch adds the
infrastructure for privileged stacks. Later patches will utilize the
generated stacks and helper functions.
Signed-off-by: Chunlin Han <chunlin.han@linaro.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch adds application data section alignment constraints
to match the region definition requirements for ARM MPUs. Most MPUs
require a minimum of 32 bytes of alignment for any regions, but some
require power of two alignment to the size of a region.
This requires that the linker align the application data section to
the size of the section. This requires a linker pass to determine the
size. Once this is accomplished the correct value is added to a linker
include file that is utilized in subsequent linker operations.
Signed-off-by: Andy Gross <andy.gross@linaro.org>
CCS811 digital gas sensor supports the following channels:
1. Co2 Channel
2. VOC Channel
3. Voltage Channel
4. Current Channel
Add support for the those in API.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Most of sensor channels defined by Zephyr use the main, unscaled
SI unit. We also have SENSOR_CHAN_ALTITUDE which is defined in
meters. So, it only makes sense to define distance in meters too
The only driver supporting SENSOR_CHAN_DISTANCE as of now is
vl53l0x.c, which was updated accordingly. Also, update doc links
in the driver based on the review comment.
Fixes: #5693
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This is an accessor function for the MCUboot image header of an image
bank. The interface may seem a little cumbersome, but it is
future-proof against MCUboot feature and incompatible header version
changes.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Applications chainloaded by MCUboot may want to change their behavior
based on whether or not they are confirmed.
Here are some examples:
- performing a built-in self test (BIST) if the image is not yet
confirmed, and marking it OK if it passes (this enables reverting
to an older working image if the BIST fails, and allows future
resets to skip the BIST if it passes to improve boot time)
- interacting with persistent metadata related to image state on
other flash partitions during test upgrades (these are required in
cases when the update source provides runtime metadata, such as
monotonic counters, related to an upgrade attempt which must be
used to report results)
To enable these use cases, add boot_is_img_confirmed(), which reads
the "image OK" field for the current firmware image and returns true
if and only if it is set.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
This patch does several things, most notably it changes the semantics
of CONFIG_DEBUG. CONFIG_DEBUG continues to behave as a vaguely defined
"debug mode" that enables printf's, -Og, etc. but now the user may
choose to be in "debug mode" while using a different optimization
level than -Og.
Tp support this a new config is defined to enable -Og;
CONFIG_DEBUG_OPTIMIZATIONS.
Additionally CONFIG_SIZE_OPTIMIZATIONS is introduced to allow the user
to explicitly request optimizing for size instead of relying on
defaulting to it.
The three config's {NO,SIZE,DEBUG}_OPTIMIZATIONS are now organized in
a Kconfig choice to ensure that at most one can be enabled at a time.
Finally, selected users of CONFIG_DEBUG have been ported to use one of
the optimizations configs when it was clear from usage that the
intention was to behave differently when using a different
optimization level and not when in "debug mode".
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Based on the discussion in #5693, the reason why humidity was defined
in milli-percent was likely following Linux which defines it as such
in its sensor subsystem:
http://elixir.free-electrons.com/linux/latest/source/Documentation/ABI/testing/sysfs-bus-iio#L263
However, Linux defines temperature in milli-degrees either, but
Zephyr uses degrees (similarly for most other quantities). Typical
sensor resolution/precision for humidity is also on the order of 1%.
One of the existing drivers, th02.c, already returned values in
percents, and few apps showed it without conversion and/or units,
leading to confusing output to user like "54500".
So, switching units to percents, and update all the drivers and
sample apps.
For few drivers, there was also optimized conversion arithmetics
to avoid u64_t operations. (There're probably more places to
optimize it, and temperature conversion could use such optimization
too, but that's left for another patch.)
Fixes: #5693
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Until now the OOB info and URI fields in unprovisioned beacons were
generally ignored by the implementation. Add fields for these to
bt_mesh_prov and make sure to take them into account when encoding
advertising data, both for PB-ADV and PB-GATT. For PB-ADV the URI goes
out in a separate beacon, whereas for PB-GATT it is placed in the scan
response data.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Be consistent with the style of always having braces even if a compound
statement isn't required. Avoids some warnings from static analysis
tools.
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Now the native console driver also handles stdin
so we can drive the shell from the command line,
a pipe or a file
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Provided separate event information structs based on events. This way
user will know what kind of information will be received to that
particular event.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Introduce CONFIG_NET_ROUTING option that allows the IP stack
to route IPv6 packets between multiple network interfaces.
No support for IPv4 routing is implemented by this commit.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The argument is a u32_t which limits the maximum disk size to 4 GiB.
Rather than fix this, delete the ioctl and switch the only use to
GET_SECTOR_COUNT instead.
Signed-off-by: Michael Hope <mlhx@google.com>
Previously, POSIX function names were aliased to zsock_ function
names using, for example:
#define connect zsock_connect
This caused the C preprocessor to replace any symbol named 'connect',
whether a function or not, in all source code which included socket.h,
with 'zsock_connect'. This generated unintended code where the symbol
'connect' was used as the name of a structure field (as in mqtt.h).
This new inline definition is applied to all the POSIX function symbols,
with the exception of fcntl, a redefinition of which would conflict
with the definiton in the toolchain's fcntl.h.
Fixes#5817
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Use CONFIG_IEEE802154 instead of CONFIG_NET_L2_IEEE802154
and CONFIG_IEEE802154_RAW_MODE when adding RSSI and LQI
members to net_pkt. CONFIG_IEEE802154 is selected when
at least one 15.4 device is selected (L2 or RAW).
Signed-off-by: Kamil Sroka <kamil.sroka@nordicsemi.no>
De-referencing the pointer from net_buf_user_data(buf) as a pointer to
an enum causes issues on qemu_x86 because the true size is 8-bit, but
the enum is 32-bit on qemu_x86. So we put in a temporary cast to 8-bit
to ensure only 8 bits are read from the pointer.
This fixes a regression from d3304dc508
that broke BT on qemu_x86.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
For SoCs that don't support vector table relocation in hardware, may not
support bootloader like mcuboot.
We introduce a way to relocate vector table in software by forwarding
the control of incoming IRQs to a new vector table which address is save
at fixed SRAM address.
User can change the data in that fixed SRAM address in order to relocate
vector table in software way.
Signed-off-by: Ding Tao <miyatsu@qq.com>
Add a distance channel in the sensor interface to be used with
time Of flight sensors (vl53l0X for example).This will indicate
the distance from the sensor to the target, in millimeters.
Signed-off-by: Vincent Veron <vincent.veron@st.com>
The meaning of this address type is the same as NET_ADDR_MANUAL,
but with a provision that DHCP can override such an address.
It's intended for the usecase when there's a default static
configuration for when DHCP is not available, but DHCP should
override it.
Before going to add another address type, there was an attempt
to repurpose TENTATIVE address state, but it doesn't work as
expected, as indeed, all existing address types/states already
have clearly semantics, and it makes sense to just another
address type to avoid confusion and unexpected behavior.
Fixes: #5696
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The library has incomplete tracing support. Given that we are not a true
kernel object, remove support instead of fixing it.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Refering the ARM's implementation, the initial support of memory
domain in ARC is added:
* changes in MPU drivers
* changes in Kconfig
* codes to configure memory domain during thread swap
* changes in linker script template
* memory domain related macro definitions
the commited codes are simply tested through
samples/mpu/mem_domain_apis_test.
Signed-off-by: Wayne Ren <wei.ren@synopsys.com>
In some cases, we need to initialize DNS servers from a binary
addresses, e.g. in case of DHCP processing. With existing API,
such addresses would need to be converted to strings, just to
be converted back to struct sockaddr in dns_resolve_init().
This is not efficient, and with a number of addresses quite
cumbersome. So instead, allow to pass DNS server either as
strings, or as struct sockaddr's (or both).
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The _vector_start was placed before the CONFIG_TEXT_SECTION_OFFSET, thus
adding the offset in the relocated vector table, making the table
invalid when relocated with a non null CONFIG_TEXT_SECTION_OFFSET.
This was tested using MCUboot with a 0x200 offset for the image header.
Fixes: eb48a0a73c ("arm: armv6-m: Support relocating vector table")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
The offset of the IP header in a received packet depends on the L2
header size. For Ethernet this is 14 bytes which puts the u32 IPv4
addresses on a non-u32 byte boundary. This causes chips that don't
support unaligned access (like the Cortex-M0) to fault.
The fixes in this patch are enough to ping the board and run the
http_server sample.
Signed-off-by: Michael Hope <mlhx@google.com>
Document USB Vendor and Product IDs and their intended usage.
Set the Vendor and Product IDs and define the USB bcdDevice
Device Descriptor Device Release Number to be the binary
coded decimal representation of the Zephyr major and minor
kernel version number.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Moved fetch of flash device bindings to early initialization of the
application.
Device bindings are constant while the application is running so
it is better to fetch it at startup, and not every time flash_map
procedures are called.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Zephyr already supports NFFS as a storage layer, but it might
be a little bit too heavyweight for certain applications in
memory-restricted ICs.
This module is response for need of Lightweight flash storage
capability. FCB is ported form MyNewt as native zephyr module.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Introduce flas_map module is abstraction over flash memory and its
driver for using flash memories along with description of
available flash areas.
Module provides simple API for write/read/erase and so one.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
CC1200 is a sub-ghz chip supporting 6 ISM & SRD bands: 169, 433, 470,
868, 915 and 920 MHz, with features dedicated to IEEE 802.15.4(g).
Current driver enables CC1200 against actual IEEE 802.15.4 Soft-MAC. 'g'
version support in the Soft-MAC will follow later.
The chip itself is closer to a bare metal radio modem than to a usual
15.4 chip: up to the user to provide the right RF settings for the
carrier band. Such settings can be generaten through TI's SmartRF tool.
Hopefully, for channel selection, this driver will be clever enough to
compute the proper register change without any special input from the
user. This will work for all the bands supported by the chip.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
