Rename the driver files, binding and kconfig options, while deprecating
the old binding and kconfig options.
Uses in tree are replaced.
Signed-off-by: Alberto Escolar Piedras <alberto.escolar.piedras@nordicsemi.no>
Add low-power-write property to MSC device tree node, set
MSC_WRITECTRL_LPWRITE if enabled.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
Introduce separate flash driver for Silabs Series 2. This driver
is forked from the Gecko flash driver with no changes outside of
formatting and naming.
Signed-off-by: Aksel Skauge Mellbye <aksel.mellbye@silabs.com>
This commit updates the STM32 Ethernet binding to include
the `phy-connection-type` property as required.
Signed-off-by: IBEN EL HADJ MESSAOUD Marwa <marwa.ibenelhadjmessaoud-ext@st.com>
The MAX14915 has eight high-side switches specified to deliver up to
700mA continuous current with simlar register map and diagnostics
parameters to MAX14916.
Documentation:
https://www.analog.com/en/products/max14915.html
Signed-off-by: Robert Budai <robert.budai@analog.com>
The AM64x has two I2C interfaces located in the MCU domain and
uses mailbox6 to communicate with the A53 cores.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Add support for AES module to cc23x0 SoC. The driver supports the
following modes:
- ECB encryption only (since decryption is not supported by the HW)
- CTR
- CCM
Signed-off-by: Stoyan Bogdanov <sbogdanov@baylibre.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Add initial support for the AXP2101 power management IC from X-powers.
Remark: only DC/DC1 and ALDO have been tested on real hardware.
Co-authored-by: TOKITA Hiroshi <tokita.hiroshi@gmail.com>
Co-authored-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
This is a follow-up to commit cdf45cb234077522b5cef2da084869af43d42dc1.
Adjust the DTS node for the nRF EXMIF peripheral so that it is possible
to handle the peripheral with the generic MSPI driver for DW SSI based
controllers and use all its data lines in communication.
Also adjust the related board files accordingly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a flash driver intended to handle various flash devices
connected over MSPI bus as long as they support JEDEC SFDP.
This is an initial commit providing only basic operations
in Octal I/O mode with some hard-coded values for Macronix
MX25Ux series chips.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Add a generic driver for MSPI controllers based on the DesignWare
SSI core. With small vendor-specific adaptations covering integration
details, it should be possible to use the driver for various devices.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
The gpio header is missing, which will lead to failures
when declaring GPIO down the line in board overlays.
Signed-off-by: Eve Redero <eve.redero@gmail.com>
Remove redundant descriptions in MBOX bindings, such
as "This is a representation of", "... node" and "... binding".
Signed-off-by: James Roy <rruuaanng@outlook.com>
Move the die-temp0 from chosen to the more appropriate aliases section.
Fixes the broken die temp polling sample for the i.MX RT10xx boards.
Signed-off-by: Simone Orru <simone.orru@secomind.com>
Remove redundant descriptions in cache bindings, such
as "This is a representation of" and "... node".
Signed-off-by: James Roy <rruuaanng@outlook.com>
Fixing multiple things related to psram usage:
- fix conflicting psram0 dts node for all ESP32 SiP and SoC.
- fix dcache and icache area used in psram mapping.
- fix smh spiram heap allocations.
- add `espressif,esp32-psram` compatible to set psram0 size in dts.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
Streamline the description field for CPU bindings by removing
inappropriate use of terminology such as "This is a representation
of...", or mentions to "node".
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
37bdc38ec6 failed to take into account commit
f72ef5c237, and added the OTGHSPHYEN bit
back into the OTGHS controller's `clocks` property. This should have no
functional impact (due to how the USB driver is implemented), but ought
to be removed anyways as duplicates information and is confusing.
Clean the DTSI for U595 and revert back OTGHS controller `clocks` such
that it only contain the controller's clock enable bit, as it should.
Signed-off-by: Mathieu Choplain <mathieu.choplain@st.com>
A file similar to vendor-prefixes.txt that provides a short description
of the top-level folders contained in dts/bindings
Signed-off-by: Benjamin Cabé <benjamin@zephyrproject.org>
There were some driver bindings issues for the davicom dm8806 driver:
- Missing type for reg-switch binding
- Missing required: true for int/reset gpios
- Fix macro for reg-switch
Signed-off-by: Pieter De Gendt <pieter.degendt@basalte.be>
This commit removes the flexram,bank-spec property from dtsi files.
The property causes flexram to be dynamically configured based on
the configuration in flexram,bank-spec. This is a problem for 2 reasons:
1) The FlexRAM will always be dynamically reconfigured to default
fuse configuration. This is unnecessary if using default fuses.
2) If a user decides to program fuses. The FlexRAM will still be
reconfigured to the default fuse configuration.
Modify description in the binding to show how to use the property at:
dts/bindings/memory-controllers/nxp,flexram.yaml
Added board overlay to mimxrt1170_evk_cm7 magic_addr:
samples/boards/nxp/mimxrt1170_evk_cm7/magic_addr/boards
Signed-off-by: Jacob Wienecke <jacob.wienecke@nxp.com>
