Group the entries by pin number and then sort them by alternate
function. This helps when editing the file.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Adds getaddrinfo and freeaddrinfo to the offloaded API.
Signed-off-by: Joakim Andre Tønnesen <joakim.tonnesen@nordicsemi.no>
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_PINS and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled gpio drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_GPIO_DEVICE and
HAS_DTS_GPIO.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled spi drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_SPI_DEVICE and
HAS_DTS_SPI.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Every board that uses dts-enabled i2c drivers has a board-level dts, so
there is no need to have separate configs HAS_DTS_I2C_DEVICE and
HAS_DTS_I2C.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Selects HAS_DTS_GPIO in various gpio drivers that already support dts,
similar to how we select HAS_DTS_SPI in spi drivers and HAS_DTS_I2C in
i2c drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Starting with glibc 2.20, there is warning when _BSD_SOURCE is defined
but not _DEFAULT_SOURCE (in /usr/include/features.h around line 184).
Sanitycheck turns this warning into error. So define _DEFAULT_SOURCE
at build time for native.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Under GNU C, sizeof(void) = 1. This commit merely makes it explicit u8.
Pointer arithmetics over void types is:
* A GNU C extension
* Not supported by Clang
* Illegal across all ISO C standards
See also: https://gcc.gnu.org/onlinedocs/gcc/Pointer-Arith.html
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Makes the designware spi driver consistent with other spi drivers by
selecting HAS_DTS_SPI in the driver. This required adding spi nodes and
dts fixups to several arc and x86 socs, as well as enabling those nodes
in associated boards.
Also refactors the driver to use the base address, interrupt number, and
interrupt priority from dts.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Added a new UART driver for posix arch boards.
The driver can be configured to either attach to a new
pseudo-terminal, or to connect to the invoking shell
stdin-out.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Makes the designware and qmsi i2c drivers consistent with other i2c
drivers by selecting HAS_DTS_I2C in the driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix 2 compile issues in RedHat/CentOS 7 for the native
ethernet driver due to a oldish glibc, which does not include
by default the needed structures.
+
Separate the native ethernet driver into its own library,
and set NO_POSIX_CHEATS for it, in case the Zephyr POSIX
library would eventually add support for any of the host functions
used in this driver.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Adding i2c slave requires overlay with node definitions and
proper aliases depending on driver implementation.
Modified i2c_slave_api test to use information from dts.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Added basic PSoC6 UART driver and added two UART nodes in the PSoC6
device tree to have output from CM0+ and CM4 cores.
Signed-off-by: Nazar Chornenkyy <nazar.chornenkyy@cypress.com>
Signed-off-by: Oleg Kapshii <oleg.kapshii@cypress.com>
Replaces direct accesses to the peripheral registers structure
with the proper SAADC HAL function that appeared recently in nrfx.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This patch changes the behavior of the sensor. The sensor
will remain in sleep mode after initialization and will only
run the measurements once when sample_fetch is called.
This optimizes the power consumption of the sensor as it
stays in sleep mode most of the time.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Refactor and reorganize ALS and proximity setup functions.
Cleanup and reorder register, fix register fields.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Use a lower slot duration than the used erase slot duration
to speed up the interval of write operations when in sync
with active Bluetooth connections.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
The code assumes that when the systick counter hits zero,
the timer interrupt will be taken before the loop can
read the LOAD/VAL registers, but this is not architecturally
guaranteed, and so the code can see a post-reload SysTick->VAL
and a pre-reload clock_accumulated_count, which causes it to
return an incorrectly small cycle count. By adding a ISB we
overcome this issue.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
The lsm6dsl sensor driver incorrectly conditioned the interrupt pin
Kconfigs upon !HAS_DTS_SPI_PINS, when it should actually be
!HAS_DTS_GPIO_DEVICE.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes casting warnings in multiple sensor drivers when creating their
own thread. These warnings were found when updating the build_all tests
to include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The bmm150 sensor driver was missed in the conversion from kbuild to
cmake. This problem was found when updating the build_all tests to
include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes a compiler format warning in the bmi160 sensor driver. This
warning was found when updating the build_all tests to include missing
sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fixes unused variable warnings for the adxl362 and lis2dh sensor
drivers. These warnings were found when updating the build_all tests to
include missing sensor drivers.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
New shell implementation is on the way. For now old one and all
references are kept to be gradually replaced by new shell.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
The drivers/pinmux/dev directory doesn't containe any CMakeLists.txt
file, preventing to enable the PINMUX_DEV option. Fix that by providing
one.
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Introduces a new mcux lpspi shim driver to be used on the imxrt soc.
This shim driver leverages heavily from the mcux dspi shim driver
because the MCUXpresso SDK provides similar APIs for the lpspi and dspi
peripherals.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Calculate proper initial PTP clock divisors based on the MCK value.
Additionally do not allow adjusting the rate of the clock. This does not
seem to work properly with current gPTP rate adjustment algorithm.
Having proper PTP clock divisors and callbacks that allow getting,
setting and adjusting current time is sufficient for proper gPTP
support.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
10 bit addressing is still not supported on nrf chips, but now
I2C_MSG_ADDR_10_BITS flag is checked.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
These mcux dspi driver configs are no longer used after legacy API
support was removed in commit 09dd5e9b22.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Any word started with underscore followed by and uppercase letter or a
second underscore is a reserved word according with C99.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The return of memset is never checked. This patch explicitly ignore
the return to avoid MISRA-C violations.
The only directory excluded directory was ext/* since it contains
only imported code.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
