MMU needs to be initialized before going in to C, so
z_xtensa_mmu_init() is called in crt1.S before call
to z_cstart(). Note that this is the default case
and crt1.S can be disabled if board and SoC desire
to do so.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Turns out not all MMU enabled Xtensa cores have vaddrstatus,
vaddr0 and vaddr1. And there does not seem to be a way to
determine whether they are available. So remove them from
the exception printout for now.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Refactor the ESP32 target SOCs together with
all related boards. Most braking changes includes:
- changing the CONFIG_SOC_ESP32* to refer to
the actual soc line (esp32,esp32s2,esp32s3,esp32c3)
- replacing CONFIG_SOC with the CONFIG_SOC_SERIES
- creating CONFIG_SOC_FAMILY_ESP32 to embrace all
the ESP32 across all used architectures
- introducing CONFIG_SOC_PART_NUMBER_* to
provide a SOC model config
- introducing the 'common' folder to hide all
commonly used configs and files.
- updating west.yml to reflect previous changes in hal
Signed-off-by: Marek Matej <marek.matej@espressif.com>
xt-clang likes to remove any consecutive NOPs more than 8. So
we need to force the function to have no optimization to avoid
this behavior and to retain all those NOPs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a Kconfig to introduce the Xtensa specific
arch_spin_relax() which can do more NOPs. Some Xtensa SoCs
may need more NOPs after failure to lock a spinlock,
especially under SMP. This gives the bus extra time to
propagate the RCW transactions among CPUs.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Allow builds which has CONFIG_MULTITHREADING disabled.
This is reduce code footprint which is handy for
constrained targets as bootloaders.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
This make MCUboot build as Zephyr application.
Providing optinal 2nd stage bootloader to the
IDF bootloader, which is used by default.
This provides more flexibility when building
and loading multiple images and aims to
brings better DX to users by using the sysbuild.
MCUboot and applications has now separate
linker scripts.
Signed-off-by: Marek Matej <marek.matej@espressif.com>
This adds code to always map data TLB for VECBASE so that
we would be dealing with fewer data TLB misses during
exception handling. With VECBASE always mapped, there is
no need to pre-load anymore.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This moves the TLB miss handling to the C exception handler.
This also allows us to handle page faults (for example,
unmapped pages) during this time as any more exceptions
handled in the C handler will not trigger the double
exception handler but the same C handler.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Instead of being able to arbitrarily set the PTEVADDR for page
table, this provides choices (currently just one). This is in
preparation to enable handling memory management exception in
C code. For that to work, we will need to pre-load the page
table address (PTEVADDR) for the memory page containing
exception code and data (containing jump addresses), and
various stacks. This is to prempt any TLB misses during handling
the level 1 interrupt code. If a TLB miss is encountered during
handling of level 1 interrupt, we will be thrown into double
exception handling code where we will get stuck in infinite
loop. However, in order to pre-load the page table entries,
PTEVADDR needs to be calculated. This requires the use of
PTEVADDR base which cannot be loaded via l32r, as we may cause
a data TLB miss. So we must be able to grab the PTEVADDR base
address strictly within code, and must be without any data
load. So changing CONFIG_XTENSA_MMU_PTEVADDR to be based on
choice so we can have pre-defined bit shift value for shift
operation. This shift value will be used in exception handling
code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Add a build option to tell if memory should be mapped in cached
and uncachedr regions.
If the memory is neither in cached nor uncached region it is not double
mapped.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
Initial support for Xtensa MMU version 3. It is using a two level page
table based on fact that the page table is in the virtual space. Only
the top level (page directory) is wired mapped in the TLB to avoid
second level page miss.
The mapped memory is completely fragmented in multiple sections, maybe
we find a better way in future.
The exception handler is where we effectively map the memory, the way it
works is:
1) SW try to access some memory address
2) The address is not mapped, so the MMU will try the auto-refill,
looking the page table
3) The page table contents is not mapped (remember, just the top-level page
is mapped)
4) An exception will be triggered, in the exception we try to read the
portion of the page table that maps the original address
5) The address is not mapped, so the MMU will try again the auto-refill.
This time though, the address is mapped by the top level page that is
properly mapped. (The top-level page maps the page table itself).
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
In z_xtensa_backtrace_print the parameter depth is checked for <= 0.
There is no need to check it again later, also, since the variable is
not used after the while loop we can use directly the parameter without
an additional variable.
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
The "cross stack call" mechanism has intermediate states where the
stack frames are not valid for our own interrupt entry code, which
causes corruption if an interrupt races at exactly the right time.
Leave interrupts masked until just before the call.
The fix is midly complicated by the fact that we RELY on nested window
exception frames to spill registers from the interruptee, so have to
do the masking with PS.INTLEVEL, which requires a register to save its
contents, which we don't have since everything needs to happen in one
4-register window. But thankfully our Zephyr-reserved EPS register is
guaranteed to be available through this process.
Fixes#57009
Signed-off-by: Andy Ross <andyross@google.com>
Use the common exit() provided by libc so we get standard behavior
across all architectures. So only implement a special exit when
XT_SIMULATOR is defined.
Signed-off-by: Kumar Gala <kumar.gala@intel.com>
The backtrace requires a valid stack pointer to start
printing backtraces. So if there is no stack pointer
being passed in, skip printing backtraces.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Commit 408472673e added inline
assembly to lock interrupt. However, XCC doesn't like the syntax
using STRINGIFY, and also an empty clobber section. So parameterize
the second argument to rsil, and remove the last colon.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds some structs for interrupt stack frames to make it
easier to access individual elements, and ultimately getting
rid of magic array element numbers in the code. Hopefully,
this would aid in debugging where you can view the whole
struct in debugger.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
In case of recoverable fatal errors the execution should
switch to another thread. This will ensure the current_cpu nested
count is reset when there is a context switch.
Signed-off-by: Aastha Grover <aastha.grover@intel.com>
If running under Xtensa simulator, it is good to tell simulator
to stop execution once we reach double exception, as the current
double exception handler is simply an endless loop. If we turn
on tracing in the simulator, the output file would contain
an infinite iteration of this endless loop, and the simulator
needs to be stopped manually before the file size goes out of
control. So we need to tell the simulator to stop once
we reach this point instead of doing an endless loop.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Save FP user register and FP register file during context switch.
This change enables shared FP registers mode using CONFIG_FPU_SHARING.
Since there is no lazy stacking, the FPU registers will be saved regardless
of whether floating point calculations are performed in the threads when
CONFIG_FPU_SHARING is enabled. This require 72 additional bytes in the
stack memory.
Signed-off-by: Lucas Tamborrino <lucas.tamborrino@espressif.com>
1. this header is no use for asm
2. if use xclib, this header include xclib stdbool, and expand to typedef
Signed-off-by: honglin leng <a909204013@gmail.com>
Change automated searching for files using "IRQ_CONNECT()" API not
including <zephyr/irq.h>.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Align backtrace output with the style used in rest of the codespace.
This makes it more convenient to compare the backtrace to e.g. objdump
output.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
The Xtensa arch has historically had state/user register accessor
macros with bare three-byte symbol names. I think this might have
been in the original Cadence-contributed arch integration, but I'm not
sure. In any case they also exist in the same names in vendor
HAL/toolchain code and are causing collisions. We never should have
had these symbols exposed in our header.
Put them under an XTENSA_ prefix to decollide.
Signed-off-by: Andy Ross <andyross@google.com>
As of today <zephyr/zephyr.h> is 100% equivalent to <zephyr/kernel.h>.
This patch proposes to then include <zephyr/kernel.h> instead of
<zephyr/zephyr.h> since it is more clear that you are including the
Kernel APIs and (probably) nothing else. <zephyr/zephyr.h> sounds like a
catch-all header that may be confusing. Most applications need to
include a bunch of other things to compile, e.g. driver headers or
subsystem headers like BT, logging, etc.
The idea of a catch-all header in Zephyr is probably not feasible
anyway. Reason is that Zephyr is not a library, like it could be for
example `libpython`. Zephyr provides many utilities nowadays: a kernel,
drivers, subsystems, etc and things will likely grow. A catch-all header
would be massive, difficult to keep up-to-date. It is also likely that
an application will only build a small subset. Note that subsystem-level
headers may use a catch-all approach to make things easier, though.
NOTE: This patch is **NOT** removing the header, just removing its usage
in-tree. I'd advocate for its deprecation (add a #warning on it), but I
understand many people will have concerns.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
Two issues:
- A unnecessary parentheses pair caused rounding errors (by truncating
a small value before multiplying it).
- arch_timing_cycles_to_ns_avg() wasn't actually converting the result
to nanoseconds.
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
The simulator seems to drop garbage addresses (somewhere in the ROM it
looks like) into this SR at arbitrary times. I don't know if this is
a hardware exception handler that we can't turn off, or a simulator
bug, or what. But our code that assumes it will be cleared to zero or
valid is breaking. Set it every time in every context switch for now
pending someone figuring out what's going wrong.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move those defines and values back to headers. Kconfig is not a good
place for this, later this should move to DTS.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Any project with Kconfig option CONFIG_LEGACY_INCLUDE_PATH set to n
couldn't be built because some files were missing zephyr/ prefix in
includes
Re-run the migrate_includes.py script to fix all legacy include paths
Signed-off-by: Tomislav Milkovic <milkovic@byte-lab.com>
Adds compatibility with Intel ADSP GDB from Zephyr SDK and
from Cadence toolchain to coredump_gdbserver.py.
Adds CAVS 15-25 (APL) register definitions. Implements
handle_register_single_read_packet to serve ADSP GDB
p packets.
Prevents BSA from changing between stack dump printout
and coredump by taking lock. Observed to be necessary for
accurate results on slower simulated platforms.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
Triggers CPU exception with illegal instruction when z_except_reason
is called (e.g. in k_panic, k_oops). Creates exception stack frame
for use by coredump. Adds unique cause code for ARCH_EXCEPT. Disables
test case failure for qemu_xtensa.
Without an ARCH_EXCEPT implementation, z_except_reason calls
z_fatal_error directly with a null ESF and bypasses
xtensa_excint1_c's error logging. An ESF is required to coredump.
Signed-off-by: Lauren Murphy <lauren.murphy@intel.com>
This commit corrects all `extern K_KERNEL_STACK_ARRAY_DEFINE` macro
usages to use the `K_KERNEL_STACK_ARRAY_DECLARE` macro instead.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Expose the Xtenesa CCOUNT timing register (the lowest level CPU cycle
counter) using the arch_timing_*() API.
This is the simplest possible way to get this working. Future work
might focus on moving the rate configuration into devicetree in a
standard way, integrating with the platform clock driver on intel_adsp
such that the reported cycle rate tracks runtime changes (though IIRC
this is not a SOF requirement), and adding better test coverage to the
timing layer, which right now isn't exercised anywhere but in
benchmarks.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Adds few missing zephyr/ prefixes to leftover #include statements that
either got added recently or were using double quote format.
Signed-off-by: Fabio Baltieri <fabiobaltieri@google.com>
The xtensa interrupt return path was forgetting to check the nested
interrupt state and calling into the scheduler to select the context
to which to return, which of course is completely wrong. We MUST
return to the ISR we interrupted.
In fact in practice this was only visible in the case of a nested
interrupt that causes a context switch, otherwise the "interrupted"
argument just gets returned and things work. In particular, it can
happen when the nested context is a fatal exception that aborts the
current thread, which is how this was discovered. The timing required
to see this on live interrupts on real applications is likely to have
been extremely difficult to detect.
Fixes#45779
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Assembler files were not migrated with the new <zephyr/...> prefix.
Note that the conversion has been scripted, refer to #45388 for more
details.
Signed-off-by: Gerard Marull-Paretas <gerard.marull@nordicsemi.no>
