This allows SoC to define their custom cache related functions
and are used by sys_cache_*() functions.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
arch_mem_coherent() is cache related so it is better to move it
under cache subsys. It is renamed to sys_cache_is_mem_coherent()
to reflect this change.
The only user of arch_mem_coherent() is Xtensa. However, it is
not an architecture feature. That's why it is moved to the cache
subsys.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The Zephyr linker script usually puts something before
z_mapped_start (where .text is), for example, vecbase vectors.
So we need to reserve those space or else k_mem_map() would be
mapping those which may result in faults.
To avoid mapping there, CONFIG_ARCH_HAS_RESERVED_PAGE_FRAMES
needs to be used. Since it is common when MMU is enabled, we
should enable it by default using imply. All current Xtensa
MMU SoCs all have this selected anyway. Using 'imply' instead
of 'select' is to allow it to be disabled if so desired.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
C99 has been the minimum required C standard version for Zephyr since
its inception. After multiple attempts and discussions, a decision has
been made to upgrade to C17 going forward.
This commits replaces the default C standard from C99 to C17 in the
configuration and build system, and deprecates support for the older
standards.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adds a new kconfig CONFIG_MEM_DOMAIN_HAS_THREAD_LIST so that
only the architectures requiring to keep track of threads in
memory domains will have the necessary list struct inside
the memory domain structs. Saves a few bytes for those arch
not needing this.
Also rename the struct fields to be most descriptive of what
they are.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
CONFIG_FLASH_SIZE and CONFIG_FLASH_BASE_ADDRESS symbols were not defined in
native_sim even though it has a flash controller and flash defined.
Signed-off-by: Flavio Ceolin <flavio@hubble.com>
Select ARCH_SUPPORTS_COREDUMP_STACK_PTR on xtensa, and provide an
implementation for the arch_coredump_stack_ptr_get function.
Signed-off-by: Mark Holden <mholden@meta.com>
Not really a kernel feature, more for architecture, which is reflected
in how XIP is enabled and tested. Move it to architecture code to keep
which much of the 'implementation' and usage is.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to allow kernel created threads (such as main and idle threads)
to make use of hardware shadow stack implementation, add an interface
for them.
This patch basically provides an infra that architectures need to
implement to provide hardware shadow stack.
Also, main and idle threads are updated to make use of this interface
(if hardware shadow stacks are enabled).
Signed-off-by: Ederson de Souza <ederson.desouza@intel.com>
- There are linker file directives that must come at the
start of the noinit region. For example, the directive
that allow that section to not exist in RAM before a
certain address (. = MAX(ABSOLUTE(.), 0x34002000);).
- Before this update, those could only be added to the end
of that region. They will now have the option to be at the
beginning or the end.
Signed-off-by: Bill Waters <bill.waters@infineon.com>
This commit introduces the SRAM_SW_ISR_TABLE option which is selected by
DYNAMIC_INTERRUPT. It allows splitting the DYNAMIC_INTERRUPT option into
two parts:
- One for the relocation of the ISR vector table in RAM
- One for the inclusion of functions needed to install ISRs dynamically
The goal is to later only select the relocation of the ISR vector table in
RAM and not all the associated functions from the dynamic interrupt
mechanism.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
Splits HiFi sharing into two different models.
1. XTENSA_EAGER_HIFI_SHARING - unconditional save/restore
of the HiFi registers when context switching
2. XTENSA_LAZY_HIFI_SHARING - on demand save/restore of
of the HiFi registers. If a thread does not use the
HiFi registers, they are neither saved nor restored.
To maintain backwards compatibility, the eager model is the
default model when XTENSA_HIFI_SHARING is enabled.
Signed-off-by: Peter Mitsis <peter.mitsis@intel.com>
the device_state need realocate when boot as second core.
as the relocation does not know the alignment, this could
be a case that the next data is mis-place after relocation.
fix this by add a alignment in device_state section.
still need revert aec0355380
reported in #86871fixes: #82841
Signed-off-by: Hake Huang <hake.huang@oss.nxp.com>
Add Kconfig option to dump only a portion of stack from the
current stack pointer to the stack end. This is enough to
let gdb reconstruct the stack trace and can significantly
reduce the dump size. This is crucial if the core dump needs
to be sent over radio.
Additionally, add another option to set the limit for the
dumped stack portion.
Signed-off-by: Damian Krolik <damian.krolik@nordicsemi.no>
Add support for .mot file flash using west flash command
The RX build output .mot as binary file to flash into
board
Signed-off-by: Phi Tran <phi.tran.jg@bp.renesas.com>
Signed-off-by: Duy Nguyen <duy.nguyen.xa@renesas.com>
GCC and Clang support the undefined behavior sanitizer in any
configuration, the only restriction is that if you want to get nice
messages printed, then you need the ubsan library routines which are only
present for posix architecture or when using picolibc.
This patch adds three new compiler properties:
* sanitizer_undefined. Enables the undefined behavior sanitizer.
* sanitizer_undefined_library. Calls ubsan library routines on fault.
* sanitizer_undefined_trap. Invokes __builtin_trap() on fault.
Overhead for using the trapping sanitizer is fairly low and should be
considered for use in CI once all of the undefined behavior faults in
Zephyr are fixed.
Signed-off-by: Keith Packard <keithp@keithp.com>
Move SRAM_VECTOR_TABLE symbol from general Kconfig to Arch Kconfig
because it depends on the architecture possibility to relocate the
vector table.
Signed-off-by: Martin Hoff <martin.hoff@silabs.com>
This is currently selected by the arch, but some devices (in paticular
xtensa ones which have configurable interrupt setups) might not
actually be able to effect an irq_offload() from within an ISR even
though we have code for it.
Make this a default and not a select so that lower layers can override
the setting.
Signed-off-by: Andy Ross <andyross@google.com>
Add the following arch-specific APIs:
- arch_curr_thread()
- arch_set_curr_thread()
which allow SMP architectures to implement a faster "get current
thread pointer" than the default provided by the kernel. The 'set'
function is required for the 'get' to work, more on that later.
When `CONFIG_ARCH_HAS_CUSTOM_CURRENT_IMPL` is selected, calls to
`_current` & `k_sched_current_thread_query()` will be redirected to
`arch_curr_thread()`, which ideally should translate into a single
instruction read, avoiding the current
"lock > read CPU > read current thread > unlock" path in SMP
architectures and thus greatly improves the read performance.
However, since the kernel relies on a copy of the "current thread"s on
every CPU for certain operations (i.e. to compare the priority of the
currently scheduled thread on another CPU to determine if IPI should be
sent), we can't eliminate the copy of "current thread" (`current`) from
the `struct _cpu` and therefore the kernel now has to invoke
`arch_set_curr_thread()` in addition to what it has been doing. This
means that it will take slightly longer (most likely one instruction
write) to change the current thread pointer on the current
CPU.
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This adds a new kconfig for eviction algorithm which needs page
tracking. When enabled, k_mem_paging_eviction_add()/_remove()
and k_mem_paging_eviction_accessed() must be implemented.
If an algorithm does not do page tracking, there is no need to
implement these functions, and no need for the kernel MMU code
to call into empty functions. This should save a few function
calls and some CPU cycles.
Note that arm64 unconditionally calls those functions so
forces CONFIG_EVICTION_TRACKING to be enabled there.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the bits to call into architecture code to dump
the privileged stack for user threads.
The weak implementation is simply there as a stub until
all architectures have implemented the associated function.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
`CONFIG_MP_NUM_CPUS` has been deprecated for more than 2
releases, it's time to remove it.
Updated all usage of `CONFIG_MP_NUM_CPUS` to
`CONFIG_MP_MAX_NUM_CPUS`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
Add the possibility to disable fault handling in spurious
interrupt handler on RISCs and replacce it with an infinite loop.
Signed-off-by: Magdalena Pastula <magdalena.pastula@nordicsemi.no>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This implements arch_thread_priv_stack_space_get() so this can
be used to figure out how much privileged stack space is used.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds a new arch_thread_priv_stack_space_get() interface for
each architecture to report privileged stack space usage. Each
architecture will need to implement this function as each arch
has their own way of defining privileged stacks.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This provides memory mappings with the ability to be initialized in their
paged-out state and be paged in on demand. This is especially nice for
anonymous memory mappings as they no longer have to allocate all memory
at mem_map time. This also allows for file mappings to be implemented by
simply providing backing store location tokens.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This commit introduces a new ARCH_STACKWALK Kconfig which
determines if the `arch_stack_walk()` is available should the
arch supports it.
Starting from RISCV, this will be able to converge the exception
stack trace implementation & stack walking features. Existing
exception stack trace implementation will be updated later.
Eventually we will end up with the following:
1. If an arch implements `arch_stack_walk()`
`ARCH_HAS_STACKWALK` should be selected.
2. If the above is enabled, `ARCH_SUPPORTS_STACKWALK` indicates
if the dependencies are met for arch to enable stack walking.
This Kconfig replaces `<arch>_EXCEPTION_STACK_TRACE`
2. If the above is enabled, then, `ARCH_STACKWALK` determines
if `arch_stack_walk()` should be compiled.
3. `EXCEPTION_STACK_TRACE` should build on top of the
`ARCH_STACKWALK`, stack traces will be printed when it
is enabled.
4. `ARCH_STACKWALK_MAX_FRAMES` will be removed as it is
replaced by `ARCH_STACKWALK_MAX_FRAMES`
Signed-off-by: Yong Cong Sin <ycsin@meta.com>
Signed-off-by: Yong Cong Sin <yongcong.sin@gmail.com>
This will update the posix thread names to match
the zephyr thread names.
This will simplify debugging as the debugger will
recognize the thread names.
Signed-off-by: Rubin Gerritsen <rubin.gerritsen@nordicsemi.no>
