Rename global variable ciphertext used in cbc_mode() to
cbc_ciphertext and move it closer to cbc_mode(). Also, move
global variable iv into cbc_mode() to be consistent with
other *_mode() methods.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Add support for AES CBC mode of operation in mbedTLS shim driver.
Refactor mtls_session_setup() to allow multiple cipher modes to
co-exist.
Signed-off-by: Siddharth Chandrasekaran <siddharth@embedjournal.com>
Added test suite with test cases which performs stress test
of the logger in immediate mode. There are multiple threads continuesly
logging and being preempted. Test verifies that system does not
ends up in assert or fault.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Ensure that RTT and xtensa_sim backends are using single byte
log_output buffer.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
When in immediate mode ensure that buffering is not used in log output.
Every byte is pushed to the transport.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Add support for the ST STM32G0316-DISCO development board. This board
features an ST STM32G031J6 MCU on a breakable SO8 to DIL8 module, a user
LED and a button.
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
The STM32G0 series of MCUs only has one APB, but two reset and clock
enable registers. Fix enabling/disabling the clock and getting the rate
for peripherals in the second register.
Signed-off-by: Filip Brozovic <fbrozovic@gmail.com>
Remove the 4us advanced radio reception, the implementation
passes all timing conformance tests without this.
This change should reduce some radio power consumption by
avoiding redundant reception duration.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
If possible, allow sending 16bits at once instead of 8bits. I found
large delays (up to 3us) between sending bytes due to Zephyr SPI
overhead, so allowing 16bits at a time if possible helps save that
time.
Signed-off-by: Pushpal Sidhu <psidhu.devel@gmail.com>
net_pkt_write() function returns 0 on success. But in this driver a
warning is thrown when zero is returned. Hence fix the driver to throw
the warning only when the negative value is returned.
Signed-off-by: NavinSankar Velliangiri <navin@linumiz.com>
Previously, there were two issues when attempting to use LOG_HEXDUMP_*
from C++:
First, gcc and clang in C mode both allow implicit pointer conversion
by default, but require -fpermissive, which no one should ever use, in
C++ mode. Furthermore, -Wpointer-sign, the warning emitted in C for
convertion between pointers to types of different signedness (e.g. char*
vs u8_t*) is explicitly disabled in Zephyr. Switch the various hexdump
functions to void*, which is guaranteed to work in both languages.
Second, the soon-to-be-standardized C++20 version of designated
initializers requires that the designators appear in the same order as
they are declared in the type being initialized.
Signed-off-by: Josh Gao <josh@jmgao.dev>
To be able to define main() in C++ code we need to have its
prototype defined somewhere visibly. Otherwise name mangling
will prevent the linker from finding it.
Zephyr assumes a void main(void) prototype and therefore
this will be the prototype after renaming:
void zephyr_app_main(void);
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
In C99 the construct (T){init-list} is called a compound literal, and
is an lvalue. In C++ it is simply a cast expression to non-rvalue
type, which is a prvalue. In both languages the expression is a
temporary, but in C99 taking its address is well-defined while in C++
it is an error diagnosed as "taking address of temporary".
Headers that may be used in C++ application code must avoid invalid
expressions. Replace all uses of &(T){init-list} in headers with the
functionally equivalent but C++-legal (T[]){{init-list}}.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Add a static method for dumping hardware map and reuse it across the
script reducing duplicated code.
Fixes#21475
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
sam0 and stm32 specific interrupt controller headers are meant to be
public, and as such should be found in
include/drivers/interrupt_controller and not in
drivers/interrupt_controllers.
Fixing documentation issues as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If it is such a thing (a CAVT intc), it will not be targeting Intel
s1000 SoC only. UP squarde ADSP use the same intc. So renaming it to
CAVS. Though CAVS name might be wrong (CAVS being an overall
architecture name, and not an IP block specification).
Reducing the amount of lines by using if/endif as well.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Pattern being <domain>_<model>.<c/h>.
Here interrupt_controller as a domain would be far too long so
shortening it to "intc", as DTS does actually.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
-Wold-style-definition is not a supported option for C++ builds. To
prevent it being passed:
* the list of compiler flags to be excluded from C++ builds is moved
to be toolchain-specific;
* -Wold-style-definition is added to that list for gcc and clang;
* -Wold-style-definition is moved from zephyr_compiler_options to
zephyr_cc_option so the option checking code is executed for it.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
If the test exits from some APIs like ztest_test_pass(),
ztest_test_skip(), or a test crashes out, the teardown
function is never run.
Fixes: #16329
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This test has a race condition between the start of
its statically initialized threads running on another CPU,
and the assignment of those threads to a memory domain in the
ztest_main() function. Disable SMP for this test.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The regular version of this test has CONFIG_MP_NUM_CPUS=1,
but this was omitted in the userspace version, and I am
seeing crashes on an SMP-enabled target that supports
user mode.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
tc_number is passed to a child thread as a parameter, which is
void *. We want to treat it as an integer, but a direct cast
to int causes a warning on 64-bit platforms; cast to uintptr_t
first to suppress it.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
test_queue_supv_to_user() invokes a child thread which does some
work which must take place before the call to k_queue_cancel_wait()
is called by the parent.
However, with SMP enabled, the child thread will just run on another
CPU and we have a race between when child_thread_get() calls
k_queue_get(q, K_FOREVER) and the parent calls k_queue_cancel_wait().
If the parent thread gets there first, the whole test hangs as
the call to k_queue_get(q, K_FOREVER) sits forever.
The fix is to have test_queue_supv_to_user() be a 1cpu test, which
ensures that only one CPU is used.
It's not clear to me why this wasn't causing CI failures on other
SMP targets, but I am able to reproduce reliably on qemu_x86_64
with my user mode patches applied.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The warning about CONFIG_ASSERT being enabled is too loud. This patch
reduces it's verbosity and omits the explanation about performance as
this is believed to be obvious.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The commit 8892406c1d ("kernel/sys_clock.h: Deprecate and convert
uses of old conversions") changed code to not use deprecated macro.
Unfortunately there was some changes done to RX TC stats update that
were missing from that commit. This commit fixes the issue and removes
the last user of the deprecated SYS_CLOCK_HW_CYCLES_TO_NS64() macro.
This is follow up to commit 5bbdf56769 ("net: stats: Fix RX time
statistics update") which failed to remove all users of the deprecated
macro.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
hal_nordic required update in ieee802154 radio driver which
is controlling the clock.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
wdt_install_timeout() was skipped as it installs an ISR-context
callback handler function. The rest are simple wrappers.
Added myself as the maintainer of the syscall handlers. WDT
subsystem appears to not currently have an owner.
Fixes: #21432
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
SOC_FAMILY_NRF has no prompt. Assignments in configuration files have no
effect on symbols without prompts. A prompt means the symbol is
user-configurable.
SOC_FAMILY_NRF is instead enabled indirectly through being selected by
other symbols.
Detected through some work-in-progress improved error checking.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
This patch enables SPI4 on the 96Boards STM32 Sensors Mezzanine.
SPI4 has been broken out to a Grove Connector on the board.
Changes:
- Updated board dts to enable spi4
- Updated board Kconfig
- Updated board documentation
- Update board pinmux
- Updated stm32f4 pinmux header file
- Updated stm32f401 dtsi
- Updated stm32f4 defconfig to enable PORTE GPIO
- Added board to spi_loopback test
Test: spi_loopback test passed
Signed-off-by: Sahaj Sarup <sahaj.sarup@linaro.org>
The GPT based counter is a count up timer.
This fixes counter_basic_api tests.
Fix over 80 chars coding style issue.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Runtime stack traces (at least as currently implemented)
don't work on x86_64 normally as RBP is treated as a general-
purpose register. Depend on CONFIG_NO_OPTIMIZATIONS to enable
this on 64-bit.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Cleanup around COND_CODE_1 usage and replacing with
IF_ENABLED if applicable.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added macro for code inserting based on configuration flag.
This macro is wrapper around COND_CODE_1().
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>