The conf file name must be of the form prj_<board>.conf for it to be
automatically chosen for a given board.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The restoring of the buffer parsing state was only correct for the
friend queue (which needs the app-layer data). Relaying on the other
hand requires the network layer data, i.e. it needs a different state
to be restored.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We never access the local network interface queue in a blocking
fashing, so it's unnecessary to have all the infrastructure that
k_fifo provides. Use the simpler sys_slist_t instead.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Avoid applications defining empty model arrays by themselves by
documenting the BT_MESH_MODEL_NONE helper macro (renamed to be more
intuitive) and using it in the mesh sample app.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It may be useful for the app to know when the provisioning link is
active and when it has been closed. This can be used e.g. to signal
the user the state of the device. Some PTS tests also require
verifying the link state.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The code was missing the sending of the Input Complete PDU, and was
also setting the link.auth value too late.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The ping command was not checking if the user gave target
host as a parameter. This would lead to NULL pointer access.
Fixes#4827
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The parameter structs for advertising and scanning contain many
members that may not get explicitly set when enabling these states. Do
a memset to zero on them to make sure we don't operate on
uninitialized memory.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove references to make-centric build process, and refer to the
steps in a more neutral way (which is equally applicable to using
either make or ninja as the generator type).
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The needed options to QEMU_EXTRA_FLAGS now get set from a single
central place, so applications don't need to do it anymore.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The qemu option to access the host's Bluetooth controller is now
automatically added to QEMU_EXTRA_FLAGS whenever Bluetooth support is
enabled in the application. Update the documentation to reflect this.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
After the cmake conversion, the SimpleLink WiFi host
driver would not build, and compiler flags like -Wno-strict-aliasing
were not being applied as they got spliced in before
-Wall rather than after.
This fixes those issues, using the set_source_files_properties()
method as suggeted in the CMakeLists.txt TODO comment.
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
Update the sample README with the latest changes during the
1.10 development cycle. We removed the 2 concurrent IPv4
and IPv6 connections and now the sample will make a single
connection based on whatever is configured (currently IPv6
takes precedence over IPv4).
Added instructions for how to switch the sample to IPv4.
Signed-off-by: Michael Scott <michael@opensourcefoundries.com>
Rather than continuing to add build system goals, let's just trust the
user to do the right thing. The only special case is build, which is
the default goal.
Signed-off-by: Marti Bolivar <marti@opensourcefoundries.com>
Use the default values for scan latency and receive delay, and enable
useful logging, like that for LPN.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
A value of 20ms means it's possible the LPN will end up doing
simultaneous advertising & scanning, which increases the risk of lost
packets. Use a default of 100ms to keep these separate.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Handling Friend Clear messages and sending the Friend Clear
Confirmation responses wasn't so far properly implemented. One of the
requirements is to keep sending the reponses even though we no-longer
have a friendship. This means that we need to keep the net_idx, frnd
and lpn_counter values valid, which in turn requires the introduction
of a separate "valid" boolean value.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The PTS tests for the Friend node expect a minimum of 16 queued
messages and the ability to have two LPNs. Set these as defaults.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When sending PDUs from Friend to LPN we should adhere to the
configured network transmit count & interval to get better
reliability for the PDUs to be received by the LPN.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When a Friend Node receives a Friend Request with a unicast
PreviousAddress that's not an element on the Friend Node, it needs to
start the Friend Clear procedure. This procedure involves sending
periodic Friend Clear messages to the old Friend of the LPN.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The only messages that should be encrypted using the friendship
credentials are those coming through the Friend Queue on the Friend
node, most request-response pairs between LPN & Friend (exceptions are
Friend Request - Friend Offer, and Friend Clear - Friend Clear
Confirm), as well as Model Publication messages when the Friendship
Credentials Flag has been enabled in the model publication.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the node is in LPN node, the LPN-Friend messages has its own
retries, so doing this on the advertising level (i.e. following the
network transmit state) is sub-optimal.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This makes it possible (in a subsequent patch) to fine-tune some
special cases, like the LPN poll messages.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
