Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I71bcfa48b31934bc683a344d40bb03f5247bbbec
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Add another group of sensors tests. Ideally these would be added to
the existing sensor test, however we are at the ROM limit of the
default board, enabling the rest of the bmc150 driver code is
sufficient to break the link. Ideally these build tests would succeed
on as larger group of boards as possible, therefore rather than switch
the default board to something with more ROM it seems more appropriate
to create more, smaller tests.
Moving the current partial bmc150 build test from its current home to
a new test and adding the missing parts of the driver.
This split of sensor tests into multiple groups is arbitrary,
suggestions for a systematic approach welcome.
Change-Id: I4d33bff00e483558c4a8486afb96c1906e2d2281
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Using AON for GPIO kconfigs is very specifc to quark se, there
is no need to make this special for this platform. Use the
existing scheme instead.
Change-Id: I946431490380dc0f537d6056277a94c9c9c80fed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Not used anymore as the support for dynamic IRQs was removed by
commit 844e212.
Change-Id: I624bbd777b2dbcbf905cedc61e63cef21e8a0bce
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
This will help catch build issues with sensors by enabling all sensors
we have into one single application using all supported IOs.
Change-Id: Id8c201b8ae9b74dccc62d6440899ff487ea09d43
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
zephyr.h includes nanokernel.h which includes cpu.h, so make it
simple and just include nanokernel.h. zephyr.h should only be
included in applications.
Change-Id: I11a9ad8608d23af4f2a40a97eb71c09516c3399b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If you select the BOOT_BANNER on its own, nothing happens and
you are left to wonder what is going, it happens very early in
the boot process and requires very early console initialisation.
Change-Id: Id548491f7e3f7f399ddc572199ce39e6fc268ed4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I2256c0f0bff5100e756709c9f99887af70bac661
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I977979bc86830768101ab9a2ca1928823ae994df
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The driver config structure should be const, that can't happen until
various existing drivers are cleaned up, but it is safe for all
drivers that use config_info to treat it as const. Update the drivers
documentation to depict this usage.
Change-Id: I01507759be7d5c347a0eaf8068636d4a39a243e2
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The drivers config structure initializer sets sys_clk_freq statically.
The runtime repeated setup of sys_clk_freq is superfluous, and
inconsitent with const driver config structures.
Change-Id: I115e2b70b193b567de83132f3984e48b2dded0a2
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I8ecc10b50e23d2dbe987e3318bac09e235b1e1da
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: Ia2203f134c8d11f52a91e6245e7bdbb26f5a9e92
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Make pointers to struct config_info const in prepration for a const
config_info.
Change-Id: I28789a7f1f26e4a0d499f5a89a567ae8c61eae51
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@gmail.com>
Provide a minimal build test for the lsm9ds0_mfd driver.
Origin: Original.
Change-Id: I5e6015ce2f5998a4c200cf582c39ed91e4e171aa
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Change the Kconfig parameter type for the I2C slave address from
string to hex. The code that consumes this configuration parameter
expects an integer and fails to compile when presented with a string.
Change-Id: I493002ea6f1266344cac863ac305e59e93a5b1fe
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Exposes the SPI 1 pins by default in the pinmux
only if the SPI 1 device is enabled in the Arduino 101 board.
Change-Id: I9a8ad0942bb1de7130013931e86144139f78c90e
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Don't use the previous reg value when setting up just one specific pin,
as it can have a side effect on other gpio pins.
Change-Id: I60e69950a72446a6fa7087b13dbcecf6ae4b15e4
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
Set the value for the I2C address directly and use only
one per sensor.
Change-Id: I24d06a964e8e372eddf262b70fe5d9854a04563c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>