net_context_unref() is protocol agnostic, after being un-referenced,
the same context might end up being used then for UDP,
if context->tcp is not reset to NULL, calling net_context_unref()
after this UDP usage will again try to release this TCP pointer
which might lead to random error.
Signed-off-by: june li <junelizh@foxmail.com>
In some cases the lladdr might not be set, currently this is
seen with RPL unit tests, in which case we must not access
the lladdr.
Jira: ZEP-2330
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If there is no route to the neighbor, then do not try to delete
it because the route pointer is NULL.
Jira: ZEP-2329
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The SYN-ACK timer is now handled by the TCP backlog functionality,
while the remaining ACKs for established connections use the tcp
struct ack timer. With this, code setting tcp struct SYN-ACK state
timers can now be removed.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add timer for sent TCP SYN-ACKs. If the timer is already
scheduled to run before canceling it is attempted, set
the cancelled flag and let the callback remove the
delayed work.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
Add an array of configurable size that holds TCP backlog entries.
The array is shared between all incoming TCP connections in order
to make it possible to get away with less memory consumed than
with a connection based approach.
The backlog entries are created when a SYN is received for a
listening TCP socket and removed once the corresponding ACK is
seen. With an incoming RST the corresponding backlog entry is
cleared, if any.
The size of the global backlog array is defined with the
CONFIG_NET_TCP_BACKLOG_SIZE Kconfig variable.
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
The network application API is a higher level API for creating
client and server type applications. Instead of applications
dealing with low level details, the network application API
provides services that most of the applications can use directly.
This commit removes the internal net_sample_*() API and converts
the existing users of it to use the new net_app API.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If ICMP packets do not fit in 1 net_pkt fragment the checksum
will be calculated incorrectly.
The problem shows up when using ping with the -s option to
create large ping requests. Eventhough the ping command does
accept the reply without complaining, Wireshark warns that
the icmp checksum is incorrect.
Signed-off-by: Erwin Rol <erwin@erwinrol.com>
In LISTEN state ignore a TCP RST. In SYN RCVD state, reset TCP
connection state to LISTEN when a valid RST segment is received. In all
other states close the connection - except that these other states will
not be handled in tcp_syn_rcvd() function.
Jira: ZEP-2279
Signed-off-by: Patrik Flykt <patrik.flykt@intel.com>
If the CONFIG_NET_TCP_TIME_WAIT support is disabled, then do not
start to wait for reply to sent FIN in active close, but unref
the corresponding net_context in order to close the connection
as soon as possible.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Moving the net_buf_pool objects to a dedicated area lets us access
them by array offset into this area instead of directly by pointer.
This helps reduce the size of net_buf objects by 4 bytes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The net_pkt_split() was incorrectly checking fragA pointer
even before it was allocated.
The unit test is fixed and converted to ztest.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
From
http://pubs.opengroup.org/onlinepubs/7908799/xns/netinetin.h.html:
in_addr_t
An unsigned integral type of exactly 32 bits.
[] the in_addr structure [] includes at least the following member:
in_addr_t s_addr
In other words, POSIX requires s_addr to be a single integer value,
whereas Zephyr defines it as an array, and then access as s_addr[0]
everywhere. Fix that by following POSIX definition, which helps to
port existing apps to Zephyr.
Jira: ZEP-2264
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The shell takes care of removing the module name so it is no longer
necessary to have this adjustment.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
In certain TCP states we should not try to send RESET segment
to peer. So check this and do not try to use NULL pkt to send
a message.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The "net http monitor" command turns on HTTP monitoring,
which means that for each incoming HTTP or HTTPS request,
a information about source and destination address, and
the HTTP request URL is printed.
User can disable the monitoring by "net http" command.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot send network data, then print the error code when
printing debug information about the issue. This is needed when
debugging the issue.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When src and dst addresses are compressed based on context
information, uncompression method should verify CID bit,
SAC and DAC bits and context ID's. But it has missed some
cases which resulted in invalid uncompressed IPv6 header.
e.g. CID is set, SAC is 0 and DAC is 1 and context id's provided.
Uncompression method assumed that src address is compressed based
on context information but it is not.
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Empty RPL HBH header will be inserted while finalizing IPv6 packet
but updated after finding nexthop and sent the packet. In case of
Bluetooth or multicast dst address it was missed. Resulted in
empty RPL HBH header and packet dropped at peer node. It should
be updated in all circumstances.
Jira: ZEP-2088
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Semantics of ENOENT error as used previously is "named entity not
found", whereas for "I/O handle is not valid", there's EBADF. For
example, POSIX/SUSV2 doesn't even list ENOENT as a possible error
for accept(), connect(), recv(), etc. whereas it lists EBADF, e.g.:
http://pubs.opengroup.org/onlinepubs/7908799/xns/connect.html
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of waiting forever for a free net_buf, set a timeout to
the allocations (500 ms). This way the application will not be
blocked by memory exhaustion.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Defines a new tunable, CONFIG_NET_TCP_RETRY_COUNT, that determines the
number of segment retransmissions that the IP stack will attempt to
perform before resetting the connection.
The default value is 9 retransmissions, which amounts to 1:42 minutes,
as close as possible to the minimum recommended by RFC1122.
Jira: ZEP-1956, ZEP-1957
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
If we receive unknown option in neighbor advertisement message,
then skip those properly. Old code did not check the length of
the extension options which could cause infinite loop.
Jira: ZEP-2219
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
Fixes the following issue:
"In expression 1UL << chan - 1U, left shifting by more than 31
bits has undefined behavior. The shift amount, chan - 1U, is
4294967295."
Coverity-CID: 167140
Jira: ZEP-2131
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Print also network buffers that are allocated by the IPv6
fragment handler. This is very useful in debugging.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the user really wants, it is possible to increase the
maximum size of the fragmented packet. According to RFC 2460
chapter 5, we do not need to accept larger than 1500 byte IPv6
packets, so the max pkt limit is set to 2. But if really needed
the limit can be raised by defining NET_IPV6_FRAGMENTS_MAX_PKT
to some new value. Currently there is no Kconfig option for
doing this as it is unlikely that this is needed.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The cancellation of reassembly did not work as expected because
K_WORK_INITIALIZER() did not setup the timeout function properly.
So do the timer initialization at runtime instead.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv6 fragmentation was not working properly when the large
IPv6 packet was being sent. There is unit tests in next commit
that will test the IPv6 fragmentation sending.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the fragmented IPv6 packet was very large, we could run out
of resources. When that happened, we leaked the memory for the
pending fragments that were waiting reassembly.
Jira: ZEP-2166
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The previous default 60 seconds is way too long for our limited
amount of memory. It might be that the 5 sec is still too long
but that can be changed in the future.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Shell itself already have a help command, so instead of creating a net
specific help just fill the help description of each command.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shell modules are registered at link time thus it makes no sense to
leave it behind net_shell_init.
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If we receive unknown option in neighbor solicitation message,
then skip those properly. Old code did not check the length of
the extension options which could cause infinite loop.
Jira: ZEP-2174
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we could not split the packet properly, make sure that the
fragments that we managed to allocate are unreffed and marked
as NULL.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print also the character when hexdumping a memory area.
This is useful so that one does not need to convert hex
values to characters in head. Unprintable chars are printed
as '.'
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The address family of the UDP port listener was not set. This
caused weird debug prints in net-shell. Now the listener will
be registering IPv4 any address as it should.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When a connection handler was registered, the checker function
introduced in commit 43b37cef ("Check duplicate UDP/TCP connection
handlers") did not check the address family (IPv4 or IPv6) of
the local end point properly. This caused duplicate connection
error to be returned to the caller.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The uncompressed source address in packets was not handled properly if
NET_6LO_CONTEXT was enabled.
This implementation is identical to the contextless case.
Signed-off-by: Piotr Zierhoffer <pzierhoffer@antmicro.com>
If we do not receive last ACK when the connection is tore down,
then do not wait forever as that would eat all the resources in
the network stack. So when we enter the LAST_ACK state, we setup
a timer that will unref the connection if the last ACK is not
received.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without change to add ACK to FIN, invalid TCP packet is generated,
where ack sequence number is non-zero. Without adjusting sequence
number as done, ACK which we send in response to peer's FIN/ACK is
not recognized by peer, and peer keeps retransmitting its FIN/ACK.
Jira: ZEP-2104
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When connection handler was unregistered, we did not remove
it from cache. This caused invalid connection to be passed to
net_context after connection unregister if connection caching
was enabled.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We did not check UDP or TCP checksum to be valid after receiving
the packet. Fix this so that the checksum is validated when
packet is received in connection handler. As the checksum validation
can be resource intensive, do it after we have verified that
there is a connection handler for this connection.
The checksum calculation can be turned OFF if needed, but it is
ON by default.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The commit "net: tcp: Handle retransmitted packets from peer"
introduced over 80 character line that was missed in review.
Fixing it now.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled RPL and STATISTICS, then enable RPL
statistics by default as that is probably what user want.
Same thing for MLD statistics.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we receive a packet with the sequence we already seen (and
processed), the most likely cause of it is that our ACK was lost,
and peer has to retransmit that packet. Then, we should just ACK
it, because otherwise peer will retransmit it again and again,
falling into exponential backoff and hosing the entire TCP
connection.
This makes changes to send_ack(), adding a flag to force sending
an ACK regardless of its cached status, and remove inline modifier,
as the function is big and called from many places.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
We must check if we receive RST in any of the TCP states.
If we do not do this, then the net_context might leak as it
would never be released in some of the states. Receiving RST
in any TCP state is not described in TCP state diagram but is
described in RFC 793 which says in chapter "Reset Processing"
that system "...aborts the connection and advises the user and
goes to the CLOSED state."
We need to also validate the received RST and accept only those
TCP reset packets that contain valid sequence number.
The validate_state_transitions() function is also changed to
accept CLOSED state transition from various other states.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_if_get_default() was documented as returning "Default interface
or NULL if no interfaces are configured.", but actually didn't
return NULL in the latter case. Instead, it effectively returned
a pointer to random area of memory, shared with other system
structures, so calling functions like net_if_ipv4_set_netmask(),
etc. could trash unrelated memory.
Jira: ZEP-2105
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
RFC793, "Transmission Control Protocol", defines sequence numbers
just as 32-bit numbers without a sign. It doesn't specify any adhoc
rules for comparing them, so standard modular arithmetic should be
used.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When a new UDP or TCP connection handler is to be registered,
we need to check if identical handler has already been created.
If a duplicate is found, the registering call will return -EALREADY.
The earlier code did not check this but allowed two identical
handlers to be created. The latter handler was never called in
this case.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This helper copies desired amount of data from network packet
buffer info a user provided linear buffer.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we send TCP data segment, we need to set the length
of the application data by calling net_pkt_set_appdatalen().
This is done so that sequence number can be properly
advanced when we receive ACK to that pending packet.
Signed-off-by: xiaorui hu <xiaorui.hu@linaro.org>
fix misspelling in Kconfig files that would show up in configuration
documentation and screens.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
When adding link-local address to the cache the type needs to be
properly set as net_ipv6_addr_create_iid will attempt to use it
when generating the IPv6 address.
Jira: ZEP-2077
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is related to commit "net: tcp: Make sure ACK timer is not
run if cancelled" which did not set the cancel flag when the timer
was cancelled from tcp.c.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
And print a warning if that happens.
This will also avoid to raise an ASSERT on net_if_tx_thread()'s k_poll
as this one will be called with no events to work with.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some applications may want to reuse implementations of these
commands for debugging/diagnostics purpose even if they don't
use net shell per se, or implement an alternative shell.
Jira: ZEP-2064
Change-Id: I48cb66ccc41bd41a75a4eb8eb3c366316ec5a096
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
net_if_ipv6_router_add() will return router pointer on success.
This information must be cached in RPL instance, otherwise RPL
instance doesn't know about default route.
Change-Id: Ic6d80ebfa95c9a64df9adf2621ae2631d9bdb990
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When router or default router timer expired, interface will remove
router from the list. In this case RPL does not know about this.
When RPL node receives DIO messages it only verifies whether parent
exists or not. This extra checks will verify whether router really
in "used" state or not.
Jira: ZEP-2080
Change-Id: I4b36b3a2d495e76a38caddd058451daff08fab0c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_if_ipv6_router_rm() is the correct API to remove IPv6 router
from the interface as it also cancels the timer and raises a mgmt
event. The net_if_router_rm() only sets router as unused and
nothing else.
Change-Id: I55114288c9ae748520b67b206edcd4f5e420b1af
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Bluetooth only cares about the actual payload so net_pkt can be unref
as soon as the data fragments are detached.
Jira: ZEP-2070
Change-Id: Id528d5440f42903378883f5e696b3f663bbfa313
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
For stream-based protocols (TCP), adding less data than requested
("short write") is generally not a problem - the rest of data can
be sent in the next packet. So, make net_pkt_append() return length
of written data instead of just bool flag, which makes it closer
to the behavior of POSIX send()/write() calls.
There're many users of older net_pkt_append() in the codebase
however, so net_pkt_append_all() convenience function is added which
keeps returning a boolean flag. All current users were converted to
this function, except for two:
samples/net/http_server/src/ssl_utils.c
samples/net/mbedtls_sslclient/src/tcp.c
Both are related to TLS and implement mbedTLS "tx callback", which
follows POSIX short-write semantics. Both cases also had a code to
workaround previous boolean-only behavior of net_pkt_append() - after
calling it, they measured length of the actual data added (but only
in case of successful return of net_pkt_append(), so that didn't
really help). So, these 2 cases are already improved.
Jira: ZEP-1984
Change-Id: Ibaf7c029b15e91b516d73dab3612eed190ee982b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Instead of just plain assert, check that the packet we receive
is ok before passing it to processing function.
Jira: ZEP-2057
Change-Id: I5754c82d16e1522d8fcee561eea280eadeec31ee
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The TCP trace values were not printed because of incorrect
config option used. Print also seq and ack values in decimal
in order to make it easier to correlate the values in other
prints in tcp.c.
Change-Id: I44d1535a84dcba8c6c937d348516ba801193ca23
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use ready-made utility function which can take care of endianness
Change-Id: I1edd0b2ce1a086dd637e97308145f9b434e48a1f
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
When connect to diffrent router with the same gateway ip address,
need to clear arp cache when disable interface,
or it will use the wrong gateway mac address.
Call net_arp_clear_cache function replace to set arp_table 0.
Change-Id: Ib403a0c0030832ba48824db4d2d3fcb8add63d16
Signed-off-by: june li <junelizh@foxmail.com>
Convert code to use u{8,16,32,64}_t and s{8,16,32,64}_t instead of C99
integer types.
Jira: ZEP-2051
Change-Id: I4ec03eb2183d59ef86ea2c20d956e5d272656837
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
There was compiler error if CONFIG_NET_DEBUG_CONN was set.
Change-Id: Ibb6721c55dd2c56cd0097359a53563c6221859ea
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We need to set the connect_cb for the context before sending SYN packet.
This is required if we have a loopback connection in which case everything
is happening more or less synchronously and the connect_cb would not be
called in this case because its value would still be null.
For remote network connections this patch makes no difference.
Change-Id: Id7f837cd9e81cd79c4666c98cae84f6cb1a77af0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We must not let ACK timer to run if we have already cancelled it.
So keep track that the timer is cancelled and refuse to run it
if it was indeed cancelled. The reason why the timer might be run
in this case is because the timer might be scheduled to be triggered
after which one cannot cancel it.
Change-Id: I1c8b8cee72bc7a644e02db154d9d009b8d98ade2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The local port was set to 0 for IPv6 when registering
the connection handler. For IPv4, the code was not setting
the port in local_addr struct.
Change-Id: I82f0c08641a94d75d255ac306eca7bec6c332fba
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Without this info it is a bit difficult to notice what is going
on in loopback case.
Change-Id: I8f61330c01d025e41f00d663bd26947b8cafb5c0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add support to print connection handler information in net-shell.
There exists one connection handler for each UDP/TCP port that we
are listening. These prints are only available if CONFIG_NET_DEBUG_CONN
is enabled because the net_context has the same information. Thus the
connection handler info is only printed if debugging is active in order
to verify that handler information is proper.
Change-Id: I0be39a5adb89b2cdbd85524c5d943e4a562b0fde
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP debugging is enabled but if the loglevel is set to lower
than 4, then compiler prints warning about unused flags variable
in net_tcp_trace().
Change-Id: I2e663644b50fe97b75088202e21b286aa010953e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Only 2 attributes lacked this prefix, which makes sense to have, so
applying it accordingly and changing the helpers as well.
Change-Id: I095b2729f977f8fb1624eff8801a4a4e21416693
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most of these macros are not exactly exposing a buffer, but a specific
header pointer (ipv6, ivp4, ethernet and so on), so it relevant to
rename them accordingly.
Change-Id: I66e32f7c3f2bc75994befb28d823e24299a53f5c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
IPv6 next headers are processed in a way so it is not required to store
which header has been already seen in the net_pkt, as the processing loop
can store internally which one it has seen already.
Change-Id: I266ba8a3a0081a162318cdafb474a0fc44a3185e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is actually useless as there is only 1 RX memory slab, and thus can
be removed to reduce net_pkt structure size.
Change-Id: I62d716515120e7356ee1e2d75bbe1ec32e22c35d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net_pkt becomes a stand-alone structure with network packet meta
information.
- network packet data is still managed through net_buf, mostly named
'frag'.
- net_pkt memory management is done through k_mem_slab
- function got introduced or relevantly renamed to target eithe net_pkt
or net_buf fragments.
- net_buf's sent_list ends up in net_pkt now, and thus helps to save
memory when TCP is enabled.
Change-Id: Ibd5c17df4f75891dec79db723a4c9fc704eb843d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There have been long lasting confusion between net_buf and net_nbuf.
While the first is actually a buffer, the second one is not. It's a
network buffer descriptor. More precisely it provides meta data about a
network packet, and holds the chain of buffer fragments made of net_buf.
Thus renaming net_nbuf to net_pkt and all names around it as well
(function, Kconfig option, ..).
Though net_pkt if the new name, it still inherit its logic from net_buf.
'
This patch is the first of a serie that will separate completely net_pkt
from net_buf.
Change-Id: Iecb32d2a0d8f4647692e5328e54b5c35454194cd
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fix warning using incorrect format specifier
Change-Id: Ib6800c40b2cd769612ae6f107e41a941926d8e66
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
We need to check whether buf_sent was true when resending the TCP
segment, and do a buf ref if needed. If this is not done, the buf
will be unref after send, which will cause unpredictable results.
Change-Id: Ibd4490305de88ac6ffd04ec42bba196e57da5c10
Signed-off-by: june li <junelizh@foxmail.com>
While very unlikely it might happen that fragment pointer is NULL
when going through fragment list.
Coverity-CID: 167148
Change-Id: Ic3dbed7ee29c7b864d4830d726f65d7f62dcea84
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When net_ipv6_finalize_raw() inserts RPL(HBH) header after IPv6 header,
it updates IPv6 next header as HBH and HBH next header as original IPv6
next header.
Then net_ipv6_prepare_for_send() will update RPL HBH header if it exists.
But net_rpl_update_header() is comparing HBH option and IPv6 next header,
which is wrong. Wrong comparion does not update RPL instance id and
sender rank. Peer nodes drops all the packets due to invalid instance
ID and sender rank.
Change-Id: I91c1870a09c60f8e1ebc73e434dcc208caf6299a
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Following flow does not work:
net_context_get
net_context_bind
..
..
net_context_put
net_context_get
net_context_bind
At instance of call to net_context_bind, conn_handler
is not NULL and returns with EISCONN.
This patch sets conn_handler to NULL in net_context_unref
Change-Id: I56a50839101b22161644b3cd7c5f510fa1abae3e
Signed-off-by: Mitul Shah <mitul.a.shah@intel.com>
This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix doxygen comment typos used to generate API docs
Change-Id: I3efff6f5fa26f87d1e658d6336fef01ce45f5bb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Use UNALIGNED_GET and UNALIGNED_PUT throughout the networking stack to
access fields from the IP address structure. These structures can be
mapped directly to buffers and the macros are required for correct
unaligned memory access.
Jira: ZEP-2012
Change-Id: I55f9da7b143a22fa869d5d215c661de988cd9b91
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
This can be useful to override the default value, for testing.
Change-Id: I23b559152c71955ff5aa6fd3643f1f40f5594194
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This permits to tweak the TX power in dbm.
Change-Id: Idadff397941a39010ce3c374d9ca74b777934626
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This does not save any space but sets the fields in the
structs in more natural order. Move IPv6 related
fields in net_if into internal ipv6 struct so that all
IPv6 fields are located inside one struct. Same thing
is done for IPv4 fields which are now located inside
IPv4 internal struct in net_if.
There is no functionality changes by this commit.
Change-Id: I7d72ec0a28e2b88c79a4c294655d5ef6da6ccb25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
So manipulating it requires to be ready to swap it if the CPU is BE.
Change-Id: I8d657c31cecfc9f3fcd010efbb6d090bf021f5f5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We need a way to know when IPv6 address is successfully set
into network interface.
If IPv6 DAD (Duplicate Address Detection) succeeds or fails,
we send a management event for that. This can be used by
other components to detect when the network interface is in
usable state.
Change-Id: Ifb22415fe21f31f5dba4f55455d6e0f89b414d32
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Some of the IPv6 utility functions were missing const in
one of the parameters that are not modified by the corresponding
function.
Change-Id: Ic9fe53daac288570c14423fd9410dcf15d1c5cfa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This makes net_ipv6_nbr_add able to update entries so it can be reused
when receiving RA or NS requests, so it now performs a lookup before
creating a new entry (using nbr_new to reuse more code) and in case it
finds a match attempts to update the lladdr.
Change-Id: I305a67a955e037cbbb862fef947a5fcfe131507c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
net_ipv6_nbr_add shall init the delayed work as nbr_new does, so this
unifies both codes into nbr_init which does take care of initializing
the fields properly.
Change-Id: I91746276d346a3dc3c36be20d49bcf1968245fc5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Route lifetime was printed using wrong modifier.
Change-Id: Ib503d50b5817491984d51bbdaadf7457fdde178b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure the RPL is compiled ok if CONFIG_NET_RPL_MRHOF is
enabled in the configuration.
Change-Id: I51fc0e20f854164c7e0374fa6a1ebf1d4e4dbc5b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If multicast routing is set meaning that MOP3 (Mode of Operation)
is enabled, then the code was not compiling properly.
Change-Id: Ice8a9f7b705c781536d3c2c5ca6cc2bb77a7acc1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default hop limit is defined in struct net_if. It is possible
that user might want to tweak it for each network packet. For this
purpose, a net_nbuf_set_ipv6_hop_limit(buf) function is created.
Change-Id: I7568330358f80f0f5007d6d3c411c120b043c04f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The Kconfig.rpl file was missing option to actually collect
RPL statistics. Unified the config option name to be
CONFIG_NET_STATISTICS_RPL as there was two conflicting settings
in the code and both of them were missing from Kconfig file.
Change-Id: I4ce4fcbaa317b36cac315ea3b3f710fa7a344b25
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The probing_timer is only available if CONFIG_NET_RPL_PROBING
is defined.
Change-Id: I2835d17e6c3d616f815f8beefd87d2571a5ad94c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
After failing to send the buf we need to release it.
This is not done for Bluetooth or IEEE 802.15.4 links which
create a copy of the sent buf and the failure case is already
checked by net_tcp_send_buf().
Change-Id: Ia556376b58ad74f68accb64eb2221a78d59dc2ec
Signed-off-by: june li <junelizh@foxmail.com>
Use UNALIGNED_GET in net_addr_ntop as the uint16_t pointer used in this
function can point to an unalined address.
Jira: ZEP-2012
Change-Id: Idfbfa8da4c8d4e10299c4ae4d6431b10466cc988
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
If the IPv6 fragmentation support is enabled, then print current
status of the IPv6 packet reassembly in "net conn" command.
Change-Id: I384e35928b67dd39ac720c77683b1767e2a1ce88
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Figure out what is the last extension header in IPv6 packet
and return offset to it. This is needed by IPv6 fragmentation
when fragmentation header is added to the packet.
Change-Id: I925ab806a5de076a425ff354711730d4f4b3c52f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit adds support for IPv6 packet fragmentation when
receiving (IPv6 reassembly) and when sending larger than 1280 bytes
long IPv6 packet. See RFC 2460 chapter 4.5 for more details.
Jira: ZEP-1718
Change-Id: Ia31c147cce4d456ee48f39276cca99aa09ce81d6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add net_nbuf_split() function that can be used to split
an existing net_buf fragment into two arbitrary length pieces,
and return the two new fragments to the caller. The data from
the original fragment is copied into these two new fragments.
Existing fragment is not modified.
Change-Id: I463e675232c6e19c2a42929f480893a6d1265873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use UNALIGNED_PUT() to store the MSS value into network packet
because the memory location cannot be guaranteed to be properly
aligned.
Change-Id: I77fd7a70ef45eedb657cac29457b0239b0a1d4c2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This helps debugging as printable string of the ICMPv6 type is
printed when packet is received if debugging is active.
Change-Id: I22b84bb6b28db7fba030699af3e561a0775b53d2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It requires a net_nbuf, so the actual buf, and not a frag here.
Change-Id: I4fd888c9a91f5e3f3dd664ae5e3bf93f90a2f597
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will refactor net_core.c and move IPv4 specific code
into ipv4.c which is a more logical place for it.
Change-Id: Ia60c5bfec488d2d1a664f113dc3df88e7d5badd1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This will refactor net_core.c and move IPv6 specific code
into ipv6.c which is a more logical place for it.
Change-Id: I5bbecbb760111326b9a6bbef5802c53d7f6efda9
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
DROP is only on error case, here it should return NET_OK if it was a
proper ARP packet and it got properly handled.
Change-Id: If347e80a76b3a56a9455b70d11b735c1fd910117
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The context buffer pool was introduced to deal with TCP holding buffers
when 6LO may modify them, therefore it makes sense to have it enabled
by default when TCP and 6LO are enabled given that the code can deal
with NULL pool in case the application don't implement one.
Change-Id: I600ca31ab40c96ee27937c2e885e332b0cee4995
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Shell crashes if you try to retrieve IPv6 nbr reachable time
when CONFIG_NET_IPV6_ND is disabled.
Change-Id: I3c5b3b5614abf80373b892943fa1ab936d235f3c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Return proper verdict on handling of DIS messages. Otherwise debug
prints will be confusing that packet dropped.
Change-Id: Ia4e18d6238868e3aed4b17e2c9ea11aa432869be
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No functionality changes, just refactored few rpl functions to
to align nicely.
Change-Id: I05c0397de7a8392cc781de2747802b2dd1bb8146
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Following changes are made:
1. Output using NET_INFO logging level. This function is not part of
automatic logging, and must be called explicitly by a user application.
But if it outputs using NET_DEBUG, then DEBUG level needs to be
enabled, and the output of this function will be drowned in logging
spam. So, let user to enable just INFO level.
2. Show entire structure of the fragment chain, *including* the head
net_buf which holds net_nbuf structure. It is numbered as -1 in the
output to preserve existing order (and not change existing size
calculations).
3. Show owning pool (and its properties, like buffer size/user_data
size) for each buffer.
4. Check for NULL pointer, e.g. for convenience of calling directly
from net_context receive callback (which will be called with NULL
on TCP peer closed connection event).
With these changes, a newcomer from one look at the output of this
function will be able to have a clear basic picture of network
buffer management in Zephyr, and recurring user will be able to
recall any details at once.
Change-Id: I8f9562748329d749f765cc6af7989a448256d7e0
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No functionality changes, just refactored net_rpl_update_header
function to align nicely.
Change-Id: I5b3e099593bb964245ca06c9fb2ec85859a0640c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Search destination address in IPv6 neighbor table. If it doesn't
exist in IPv6 neighbor table then go for routing. Added sanitycheck
to verify destination ll address is not the source ll address of
original packet (that means we are re-routing back to original sender).
Change-Id: I24adace6a0d17fbd1d2a36a5d75c79320de0a883
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_ipv6_nbr_lookup_by_index() will always find first matching entry
in IPv6 nbr table with lladdr index. But there can be multiple neighbors
linked to same lladdr index. So find route nexthop with ipv6_nbr_data
from nbr(ipv6 nbr) data pointer.
Change-Id: I5081d40330f5bc1ef0d96def03f4add4808b2fe9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Router lifetime timer initialized in router_init but not submitted.
Change-Id: If5a77f413832db52eff99e7191f82d2a8fc8f081
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Extra data size was not considered in nbr size calculation.
Change-Id: Idc572abf55c8f9fd19940edb719f58e02e7f8ecd
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Route lookup is necessary only if life time is
NET_RPL_ZERO_LIFETIME, otherwise lookup not required.
Change-Id: I25fb85c53e2d43cfdce08411af385f3ae26384cc
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If DAO message is routed through different nodes or sent directly
to a parent and ACK lost somewhere in noicy network. Node can not
join RPL mesh network properly. So try re-sending DAO message for
max number of trials (Kconfigurable).
Change-Id: I7f6a065deacd1e3942c89118ce8da4fbaa34af51
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When sending TCP data, check if the retry timer needs
to be started.
Change-Id: Iea90716e918dec0b22e60bf32467b11c0d1a296f
Signed-off-by: june li <junelizh@foxmail.com>
It needs to check if current event matches:
- cb's layer
- cb's layer code
- cb's command
If none match, it will not raise the event.
Fixing the unit test as layer must be always != 0.
Jira: ZEP-1940
Change-Id: Iadd63e751fa6e534a10e7da9cae0f5bb5a384461
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Most (if not all) 802.15.4 devices can handle ACK replies by
themselves.
Change-Id: I0319d59de767b20eb67c1592bacaa4a7b7015cad
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that interface is not directly used in data and mac frame creation,
let's just pass context pointer.
Change-Id: If002e6790d044eeffc57cb5685ac9525fbd6e43c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that RFD is default, the extended address can be changed through net
mgmt API, and thus no longer be the same as device's generated mac address.
Change-Id: I07ee647615c2caa1994712147c6c8a2b4306900d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
There is no need of interface anymore.
After previous changes, it appears that net_if parameter is not used so
we can remove it.
Change-Id: Id3570f50865696818a9be2280172e2e25fc537f7
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
commit id 7a11439020 changed this.
Hopefully that changed did not affect anything.
Reducing minimal frame length and applying the change everywhere where
relevant.
Change-Id: I5ae203751bfcf70cef833620106d2c2d0e33b7a5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
And use them accordingly in the common code part.
Change-Id: Id91b76e5baea607c0d68eebcde6f84e4e35ca44c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
ORFD was a hack, from the beginning of the IEEE 802.15.4 Soft MAC stack,
but is now useless and can therefore be removed.
Change-Id: I74d5e1995993f4a0749b6d9d553406d5ae162bda
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In order to simplify when 802.15.4 is selected on these samples, let's
setup the device through a common code.
For this to work, RFD is now the default.
Change-Id: I46590864442f77d83f681cc0e854c94344648856
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's more readable and along with other part of the system.
Change-Id: Ib4be787d74310d838f38b1f1d5624e7357da8969
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These should be used by samples to fix basic 15.4 settings.
Change-Id: I31ad1540008ac760b7aef720e520bf8e72d3a805
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
s/SAMPLES/APP for name shortening. Applying the change where relevant.
Not only IP addresse will be available as samples settings there but
also IEEE 802.15.4 channel, pan_id, and more for instance.
Change-Id: I05dd24989bd0c804d9588092d67044a3e063bc88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will be needed for Thread/MLE.
Change-Id: Ib421da66cfc4da8111ff131f08cac74a11674928
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These requests are used to set/get the key, the mode and the level of
the IEEE 802.15.4 link layer security.
Only implicit key mode is supported for now.
Change-Id: Ifbc9a5d08f9fbf0d51d6c3e4b650cfdce3d263db
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Initialize the ciphers.
Once the header is parsed and validated, we get all the necessary info
to decrypt the frame properly.
Change-Id: I3142fa572c7566b40efe18cf9d4e3f2b4bce0612
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not only about decrypting and authentifying but also setting the
right frag's length after that.
Change-Id: Ifc766b212b37d4e3593c210f6646ee85dff2ab6d
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Take into account the current security context to compute the header
size.
Provide the function to fill-in the aux security header in a frame.
Finally, call the generic encryption function which will process the
frame relevantly according to the given security context.
For now, only implicit key mode is supported.
Change-Id: I5412c32179e70217c0946b1b54d9a752375d522f
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This provides the means to authentify with/without encryption or
decryption of a frame following a generic 15.4 security context.
Change-Id: Ia5dbb7f43936a8131112fe4b16c9780e30f904c1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Some call use a boolean for it, and since it's supposed to be 1 or 0
let's ask for a boolean always.
Change-Id: If4fbe5d58d5c25fb2a86719435c59af53ea02445
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When applying security, there will be needs for accessing payload as
well, thus providing the whole frag directly instead of a data pointer
on the ll part.
Change-Id: Ia97a1f07f2a12fc5cdf085c3cc6350d50b419cae
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will ensure basic auxiliary security header fields are relevantly
filled-in as well as moving the parsing buffer pointer to the right
position for further parsing.
Change-Id: Ib09e312add783b13bf8b59a81a2ffe64eb6f8dc2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
These will be used to parse and create 802.15.4 frames with security
enabled.
Change-Id: Icad214c8d7aa658b8483bf601b091b266e1b8d77
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If the destination IP address is one of our own address,
then reroute it back to us.
Jira: ZEP-1966
Change-Id: I8b93fc5425f3f18b0b9e85ca9a57cb122129c47f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The fields in "net conn" output were unaligned and looked
generally very ugly.
Change-Id: I56b29982d4f6b984405944d155bbb6c682383318
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
It is possible that CONFIG_NET_CONTEXT_NBUF_POOL is set but
application has not defined any pools. In this case the tx and
data pool pointers will be NULL in net_context struct and we
must use the default pools instead.
Change-Id: I286f34c87d9182aace71e0a61f038945810e4916
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The default timeout (4 min) is very long. Allow tweaking the
value via Kconfig option.
Change-Id: Iddfd48b96f3612b9bba7caa4d64357505df9644d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Match neighbour with link layer address. And get RPL parent with
matching ll address. DAG id different which is prefix based address
from the parent.
Change-Id: I75ecdfa7aa63da210676a3f44b8510d24c38d1d5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Let intermediate node reply DAO ACK only if it can not forward original
DAO messages to it's parent. If DAO forwarding is success let the final
parent sends DAO ACK.
Change-Id: I14ff9b5b110a639cad6415741dde71c2cdd222ef
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
DIO message suboptions can contain PAD1, PADN, Metric container,
Routing information, DODAG configuration and Prefix information.
Right now we are not skipping PADN and unknown options payload.
Change-Id: I43557962784f68a223ea209eae5ca0367a3d5410
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
DAO message suboptions can contain PAD1, PADN, Target, Transit
and Target descriptor. Right now we are not skipping PADN and
Target descriptor payload.
Change-Id: I89a9c3cb59de5397d1430f0fa5de95beee193880
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Parse DAO ACK from parent and analyze it.
Change-Id: I2394bd5e339ff00c87b9b4835dd5a21e2bafb2e5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Indentation is wrong for few options. And few options does not
properly aligned.
Change-Id: Ib4a8a90a17fd20ddd16ec6f29558eb937f035bb9
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Earlier net_nbuf_copy() mangled the original buffer. So cacheing
src and dst address was necessary. Now original buffer does not
get affected by net_nbuf_copy() call. Cacheing is not required.
Change-Id: I25f60bc6db2a75612e562e56024d4459478d80b4
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Do not call callback if destination ll address is not set. This
happens when dst is multicast or broadcast.
Change-Id: I34dda92799a987d9cff031dc97f4a01b94437561
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
There is no transition from tentative state etc... It should directly go
to preferred.
This is fixing ND processing when DAD is disabled: source address was
never set, as tentative state is not a valid in
is_proper_ipv6_address().
Change-Id: I6f0a0fdd99dd13d28849f9749f89ec21fdd370d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add "net dns <hostname> [A | AAAA]" command support that can be
used to query IPv4 or IPv6 address for a given host name.
Change-Id: I86b2258efa994a67163f9b3b340f44d65767f11b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the config file contains DNS server addresses, then
configure the DNS resolver to use them.
Change-Id: Ie7f2bdcf7ac4bb7ee0ecf7fb5b7bd2df3379cdc3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Length parameter was always useless, only used in debugging, so that can
be removed.
Change-Id: If597f424840f37955202fa5fe827dd992e4cf776
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Thus the ping command is more user-friendly: at least user knows the
ping got a reply or not.
Change-Id: I740a2f77d288f6287ac04c908f3d517a49df57d2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
As it is done for ICMPv6. This will prove to be useful for implementing
an echo reply handler in a ping for instance.
Change-Id: I969a1da60f2a4ea59eee5c9983eb6e340923e2ef
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_addr_pton always returns -EINVAL in case of error, so let's play with
it to factorize the code.
net_icmpv<4/6>_send_echo_request always returns -EIO in case of error.
Change-Id: I89e5ccd4b936701f7dad194089dda845fab5d738
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Refining the names around IPv6's neighbor states to differentiate them
easily from any net_nbr related names (which are not tighten to IPv6).
Change-Id: Ibc24df2a9485477a53fe5fe1c8f993f0fcd91635
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Probably some refactoring left-over.
Change-Id: I9715441a54b2e675135ce4072651dcead3216d3b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
We incorrectly changed the state from FIN_WAIT_1 to CLOSE_WAIT.
This caused ACK be sent in CLOSE_WAIT state when the connection
was closed by peer. Sending ACK in this state is not allowed
according to RFC. The connection was still closed but slightly
wrong way.
Jira: ZEP-1961
Change-Id: Ie4aa6818128d4190230b679e26ac9630c7d45d69
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can open a TCP connection (just one at a time) by
using "tcp connect <ip> port" command.
Data can be sent by "tcp send <data>" command.
Connection can be closed by "tcp close" command.
Change-Id: I75aedd873a30575a6f742926b716afb7dbbfb92b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No functionality changes, use separate variable so that we do
not need to do big-endian conversion multiple times.
Change-Id: I8874b427bd39dfa2d952034a2623c47544a644fc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If IPv6 router is added, then NET_EVENT_IPV6_ROUTER_ADD event
is generated. When router is removed, NET_EVENT_IPV6_ROUTER_DEL
is then generated. This is useful info if we want to have a generic
connectivity to outside of our local network.
Change-Id: Ia03958a071ceb998127894025c99ab72a8b648d5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the bind port is set to 0, then return the real bind port and
show it in the debug print.
Change-Id: If75b52bdacfc916329222d0d9e8aa4669e7a7160
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
- Rename struct net_l2_offload_ip to struct net_offload
- Rename struct field offload_ip to just offload
- Rename include/net/offload_ip.h -> include/net/net_offload.h
Change-Id: I3cd891c2b13e0e8f3ad1c66264f90b5031ae17c2
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
This is part of a patch series to decouple TCP/IP offload, which
currently occurs at the transport layer (L4), from the data link
layer (L2).
This patch simply renames the NET_L2_OFFLOAD_IP Kconfig variable
to NET_OFFLOAD.
Change-Id: Ic8b1d004cbac09b7c636475aaed75b0a31e4be1c
Signed-off-by: Gil Pitney <gil.pitney@linaro.org>
When route not found try with default router if it exists. Consider
default router as nexthop. If default router also does not exist
then drop the packet.
Change-Id: I56cc9e4a1432fc25687cbaea600bfe9cf5b1d51e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
No memory leak but debug prints shows buffer dropped due to
NET_DROP verdict. Added TODO comments to support DAO ACK.
Change-Id: I32deb2e1d2eea98f19ef26ad429ba8d03ae13751
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When an intermediate node received DAO message, it should forward it
to its parent (if exists) and it ack to orignal DAO sender. But
dao_forward() function steals frag chain from original buffer. Src
and dst address pointers to original buffer are not valid to
continue in dao_ack_send. So cache them for DAO ACK.
Change-Id: I3a4df4837a133afe4e2badb183f729c37d267f63
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When DAO message is required to be forwarding to a parent addr,
only frag chain and iface is considered. But for newly created Tx buf
other metadata also required. In this particular case setting
inet type, ip header length. Also update checksum as dst address
is changed.
Change-Id: If0e0a52e943db66be4aeecb6d0e3b9d7c3f04f58
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Path lifetime exists at 6 byte in RPL Transit information. So after
type and option length 3 bytes should be skipped to read lifetime.
Change-Id: Ic90c3bd75e3c7c63ffe9be27c0d206fc8fd58604
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
NET_RPL_DAO_ACK Kconfig option was missed. subsys/net/ip/rpl.c has
functionality of this option. By default it is disabled. Enable it
if you want to know the status of DAO message.
Change-Id: If5ed86c9c8c6c62991fc92d2f1e2a35331811356
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If DAO message is not inteded to destination node then
intermediate node will forward original message with final
destination address. But verdict not passed properly.
Change-Id: If61c7b683b55b24b68f5235d0eee5ed60b611aef
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Two size_t variables were printed using %d which gave warning
if RPL debugging was enabled.
Change-Id: I6bc135c76a31da304e94af34ecd571163ddf2a0e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Selecting RPL will need to enable NBR cache support,
it is not enough just to select IPv6.
Change-Id: I8162497111354d0fa9e44564fa5cc5ee46110b96
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Instead of simply dropping the packet if the destination IPv6
address is not ours, try to figure out if there is a route
to real destination and then re-route the IPv6 packet there.
Change-Id: I6b2a0d7096b3d7877b82b04f38e3a6e588587c11
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_delayed_work_init shall only be called once per work and not every
time before as that can trash the workqueue list if the work is pending.
Change-Id: Ib04b6689c59d03328687b0b579e80012dbd2f853
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
k_delayed_work_init shall only be called once per work and not every
time before as that can trash the workqueue list if the work is pending.
Change-Id: I454f40b63133bb7d6239dbe902858932bacfc454
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Print TCP header information in one line as there is really no
need to use multiple lines. Also use debug level when printing
the header info so that it is only seen if debugging is activated.
Change-Id: I27f314ca060239545769dec07148897da3426436
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
k_delayed_work_init shall only be called once per work and not every
time before as that can trash the workqueue list if the work is pending.
Change-Id: Ib6398a6a843dd4d820529487ad76a9dc9d9e152e
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This fixes warnings when using %u to print the result of sizeof.
Change-Id: I5391456c855ec2785af22467d9d0f355bbb1e577
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The return code from net_icmpv{4|6}_send_error() was not correct
if the error message could be sent. Now 0 is returned if sending
succeed, and <0 otherwise.
Change-Id: Iff67f097a9d9519c9f11d4cbc9cf428a7c74ec1b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Update statistics for every sent, received and dropped
ICMPv{4|6} packet.
Change-Id: Ibe6f02e8222adb3db1f1dbd0cde1ed251710eb43
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are replying ICMPv{4|6} message, then do not wait forever
for a free buffer. In a busy system, this might lead to non-progress
in RX path if we receive lot of packet from the network and never get
a free buffer.
Change-Id: Iaef92541b8745f872a07bc6e2052d0393d4d1e8b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
commit 2e3e93dccb ("net: 6lo: Fix compress bit calculation") adds
a bit shift to the compress bit calculation, however it's typo'd as
a greater than comparison causing get_6co_compress() to return a
boolean value rather than the shifted version of the calculation.
Change-Id: Idacac2c032a03f1f75a78c94bed4c70428b8c77a
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The IPv6 prefix address length was incorrectly set in net_if
after RA was received from the network. The incorrect "len"
variable was used instead of correct "prefix_len" in the prefix
info struct.
Change-Id: Ifeaf150b9960414d2ad200053a3bd5290dc8d365
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the earlier prefix timeout is not cancelled before setting
it again, the system will hang.
Change-Id: I6e271294c8e5d43e3ceae4780b5d1c26bab2b296
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The caller semaphore was released too early, this can cause the caller
to re-use the data and possibly corrupt the memory, if caller yields
and is run before this management thread. Solution is to first remove
the node from the list and then unlock the semaphore.
Change-Id: I02cef53559d776f32a5959380e6b7122cd5198c5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add CONFIG_NET_IPV6_NBR_CACHE option that is the base for both
neighbor discovery (ND) and duplicate address detection (DAD).
Both ND and DAD can be disabled if needed. If NBR cache is
disabled, then ND and DAD are disabled too.
Note that it makes not much sense to disable DAD or NBR cache
as IPv6 will not work properly without them. It is possible
to disable ND but then the neighbor information needs to come
via other sources like RPL.
Change-Id: I57c8668ad828b3a153dfc58eea78bf5f7ac3938a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Although very unlikely, I saw crashes at startup that could
be because of the buf or iface were null.
Change-Id: I8649eeb4f24fcd7d9f2acaeefaba4e6593388e91
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The fragment pointer is good to print here.
Change-Id: If09e684bbe0f9f5d3f961c4af8f86fb3ff364671
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If for some reason the neighbor solicitation cannot be sent,
then we need to unref the pending packet as that would never
be freed otherwise.
Change-Id: Ied12a9b3a027a2aad3fafd0b5b36c56b5f042c28
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are trying to send a IPv6 network packet and there
is no data, then print error.
Change-Id: Ia0e7bebae513f1bcf984e189566ae7e10a90bbfc
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When going through fragments in update_ll_reserve(), use
net_nbuf_unref() in order to get better memory allocation
debug prints.
Change-Id: Ia7ee15b32800acdebeb28125465515132c55e179
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to receive anything if network interface is down.
Change-Id: I22d62aeaf4fbef54608818bf6c8073ec2e9a7c09
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Make sure that both the TX and RX threads are running before
we turn the network interface up.
Change-Id: Ie7e5938403e90e1ae76047c221cf9fd2f5a1167b
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In case of callback based event listener, it is easy for the callback to
filter on the given interface. But in case of the synchronous call it's
not: it would need, after a failed comparison on the interface pointer
to loop by itself on the net_mgmt_event_wait() which is a little bit
heavy (reinstalling the event listener, with the semaphore and all) and
a bit of a burden for the caller itself.
Instead, net_mgmt provides a dedicated call
net_mgmt_event_wait_on_iface() which does it the right way, so the
callback and the related semaphore are destroyed if only the iface
matches the one given as parameter (besides the timeout obviously).
Change-Id: Iab05c3249586f4f4d0447eea42fdac72b8428f2e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Instead of creating a handler and a related callback structure on an
event_mask: net_mgmt_event_wait() can be used to wait synchronously on
such event_mask. The core mgmt part will seamlessly reuse the struct
net_mgmt_event_callback so the whole internal notification mechanism is
using the same code.
Change-Id: I426d782c770e75e5222aa3c5b703172b1f1f2e5e
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's not enough to know just network address and port number to
disambiguate an endpoint, protocol (TCP vs UDP, etc.) should be
known too. Without this patch, there is a confusing output from
e.g. echo_server if both TCP and UDP is enabled.
Jira: ZEP-1086
Change-Id: I247a2dfc87df634ceac3b8733d7349b1d6aca80c
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This function is useful for logging in other parts of network stack,
so allow to reuse it. (Will be used for net_context logging in a
follow-up patch).
Change-Id: I8238874584f8f039c94e5d827265944d97d13f6b
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
NET_IF_UP may change during the lifetime of k_pool which means we would
have to reconfigure everytime the flag changes but NET_IF_UP is already
checked during net_if_send_data thus it should never reach the queue in
the first place making this check unnecessary.
Jira: ZEP-1888
Change-Id: Iaa8471bee886a6f7e701a1dd243fb199def26589
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Current finalize api's takes buf as input parameter and returns
the finalized buf. But if there are any issue while finalizing,
it failed to throw an error.
Change-Id: I6db54b7453eec41a8051fab50d5c0dc937debd54
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When IPv6 header contains extra header (e.g. HBH), extra header length
was not part of app data length calculation. Result applications get
invalid total length. Also simplified set_appdata_values().
Change-Id: I07438d62dfd0f9abc1452484deb8b5eacdc37cf1
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add support for adding IPv6 extra header (HBH) with RPL options
in ICMPv6 echo reply.
Change-Id: Ibd0b96362a7d5a5f668a18d6a33e6917d37dc51c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
As per RFC 6775 4.2, context length holds number of leading bits
in the Context Prefix field that are valid. Rest are not valid
for compression.
Change-Id: Id21cc2d7a5d42980cf9295f85e75c4869ff6cb99
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
When a nodes receive a packet with RPL option in IPv6 HBH, it's need
to be reverted with node flags, instance id and sender rank.
Change-Id: Ic49c8e84c7846dc02728c120078506f6d7411e52
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
RPL extension header verify function takes input parameter as
metadata 'buf' and start reading from it. Instead it should start
reading from fragment (buf->frags). Also API should return
fragment and offset where caller can continue reading it.
Change-Id: I80612144aed55aa2dcf9eaab1f4408e10efdda31
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Make sure the neighbor cache is printed nicely in table
format with columns aligned.
Change-Id: I5323fdc644317ea08fd4694215f8cd44f8d7ff74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_byte_to_hex() prototype first parameter was uint8_t *,
but it should have been char *.
Jira: ZEP-1885
Change-Id: I6132a67bb9e8199de88451fb4e446081f401e8f6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We did not handle NUD (Neighbor Unreachability Detection)
properly and did not go to DELAY state when neighbor
reachability was checked.
Change-Id: I127d25124aa806c44ff37c1355cc3db7fb25b2d2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print timer information when creating and expiring the
reachability timer.
Change-Id: I5c8fee91de85fe7c9ea7c467f45dbb105250d5b1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The send_ns timer was used instead of reachable timer when
the reachability timer was expired. This meant that the
reachability timer was never restarted after it expired once.
Change-Id: Iccbd6d019d1106adca60f7319bc4c547cdb1d924
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Print the neighbor pointer address and remaining time when
viewing the neighbor cache in "net nbr" command.
Change-Id: I13840ccc16c31c99a803ec1b7afe69879bd639f2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use the proper API to get the remaining time in prefix timer
and return the value in seconds as expected.
Change-Id: I055ce0ba6092c23ad60d6775ce75a0a67ad91d26
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to verify that the neighbor is reachable, send
neighbor solicitation message to neighbor which should then
send neighbor advertisement to us so that we can then mark
it reachable.
Change-Id: I2c45ee4a6982c698ef6c8fa1acccb995aadf8ee6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
In order to be able to debug IPv6 neighbor state changes,
pretty print the state names when setting the new state.
Change-Id: I64e0b4173eaa63c9715c17420a008602759aa4fa
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To be used by net-shell and other files for debugging neighbor
state.
Change-Id: Ie9b09a54a05dcb066906a3697dfe38aeffc886e6
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
No need to print error if we have already joined a pre-defined
multicast group.
Change-Id: I1237d5fbf0b63267ccb00432522513358c48d31d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Wrong type modifier %zu in debug print, should be %d.
Change-Id: I82feca91d9e083a03263477569c552acc7c9767f
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Patch 235118245864491a592245f57e5244bf61711943 did not set the ll
addresses in the right buffer which causes 6lo to unref buffers
causing a double unref latter.
Jira: ZEP-1890
Change-Id: Id7591ef3c20c7ab62dcb04576406d70602baa129
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
IPv6 fills in lladdr_dst properly according to nexthop. Thus it's
useless to lookup again for nbr when creating data frame etc... Let's
use this directly. It both optimizes the code path as well as implements
proper nexthop frame sending.
Jira: ZEP-1863
Change-Id: Ic17a1b14a0db0692d31419ea2f45a5f288a09fb5
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Now that k_poll landed in the kernel, it's worth using it to save
memory and reduce the number of threads at runtime.
Such switch has been first done in bluetooth (see hci_core.c and conn.c
in subsys/bluetooth/host). Since network interfaces kind of follows the
same design for sending data, it was then easy to copy the same change as
in bluetooth.
Change-Id: I7f9734b88ac818284bbabaedc946b4765b905ebb
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Due to recent TCP fixes for 6lo, we are making a copy of buffers
sent to net_tcp_send_buf() so that TCP retransmit can send the original
(unmodified) buffer. This original buffer is freed via the TCP
sent_list when the related ACK packet is received.
However, there are users of the net_tcp_send_buf() function which
will never get a corresponding ACK (and do not add the buffer to the
TCP sent_list). An example is send_ack() in net_context.c. In this
case, we leak the original buffer.
To fix this leak in the 6lo specific block of net_tcp_send_buf(),
let's check to see if the original buffer was added to the TCP sent_list
and if not, then avoid the buffer copy process entirely.
Change-Id: If99e0e5bf266d33dd3466dc5d74443eaa39d10a8
Signed-off-by: Michael Scott <michael.scott@linaro.org>
Instead of magic constant (0) use the K_NO_WAIT when spawning
a thread.
Change-Id: Ib3a181fdfa246843d9c708592ccc754e54bc6005
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the networking cannot work without RX or TX threads, mark
them as essential.
Change-Id: Icb52c77fcdcef35d77c36e5ec855fed438a38407
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot join pre-defined allnodes or solicit node multicast
groups, then print error. Typically this will happen if the number
of multicast IPv6 address records is too small in net_if struct.
Change-Id: I12211cff90ef4edc856f1432cab0c37aae9a1bd5
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is only needed when doing unit tests.
Change-Id: Ifd4e5e8ea98e3ab2344ed0c19d92f2be7d8008f8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Collect number of received, sent or dropped multicast listener
reports and queries.
Change-Id: Ia5c08203155475763f96df23f44eceffa7569873
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we receive MLDv2 (Multicast Listener Discover) query,
we send out information about the multicast groups that
we have joined.
Change-Id: If4ea9fa685319b2ad900e1949a5cbe12e7696b43
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As dictated by RFC 3810 ch 5, we need to add Hop-by-Hop option
with Router Alert sub-option to the sent multicast listener
message.
Change-Id: I8e3ed58fff4736e9708276a3185f94e7f2b453a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we are taking network interface down, then flush the TX for any
pending bufs that would be needed to be sent.
Change-Id: I229ecce8e07ec5847d4c6c6a1994de04bd9171e2
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the multicast address already exists, then do not give
error but try to join it.
Change-Id: I32ffa6b3bf0798011d684a1a21e87e389f1f0380
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When network interface is taken down, leave only those
IPv6 multicast groups that were joined.
Change-Id: I414556c093ba67be7c13e6c86e0451465c2203f3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Send management event if we joined or leaved IPv6 multicast
group.
Change-Id: Ieeb407ef88fb3bf4cd92d4fb4b69f03b260474e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When we setup the network interface, add predefined IPv6 multicast
groups into the network interface. When interface is taken down,
then leave all the multicast groups that joined.
See RFC 4291 ch 2.8 for details.
Change-Id: If17d3e8c75157a02aa93c92e2fb499619c1484cf
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This and subsequent commits adds API to join or leave
an IPv6 multicast group.
Jira: ZEP-1673
Change-Id: I26dcfe16a4527dbf7886a30827a5d4ebfdeaac01
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The tcphdr->offset was not set when tcp options were added.
Change-Id: I19fe97983ce81948a9a84893183e5c9000f12767
Signed-off-by: june li <junelizh@foxmail.com>
There are no users of net_tcp_set_state() left outside of
subsys/net/ip/tcp.c.
And the naming of this function is confusing -- it could easily
be mistaken for net_tcp_change_state() which contains additional
logic for certain tcp states.
Let's remove it entirely and fix the remaining uses to set
tcp->state directly.
Change-Id: I92855ad180e8682780fcff11e50af06adcbc177c
Signed-off-by: Michael Scott <michael.scott@linaro.org>
In net_tcp_release() when a TCP connection is being closed, we
should call net_tcp_change_state instead of net_tcp_set_state.
net_tcp_change_state() will call into net_tcp_set_state() but
also contains logic specific to NET_TCP_CLOSED which unregisters
the context's conn_handler and sends an accept callback (if
present) with -ENETRESET error for user code to handle.
This fixes an EISCONN error returned by net_context_bind() when
a TCP-based net_context was reused. Due to the conn_handler
not being cleaned up in the TCP code.
Change-Id: I8439a028a1c7ae5fd2a50d11caa9947a0ac6c7d4
Signed-off-by: Michael Scott <michael.scott@linaro.org>
The parsing of IPv6 extension headers was skipping bytes
in certain cases.
Change-Id: I80612144aed55aa2dcf9eaab1f4408e10ef9ca31
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Compress bit calculation was wrong. It should be moved
to 4 bits left to cache it properly.
Change-Id: Ib011874881a69032795c2ecfd9a615b6cf559c69
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Max 6lowpan contexts are 16 as per RFC 6775 4.2 6LoWPAN Context Option.
Range is 0 - F. So context id '0' is valid.
Change-Id: I8468a805e0145b64921139a587cdaeeb9d6871b8
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If hoplimit bit is unset then values are inlined as
per RFC 6282 3.1.1 HLIM: Hop Limit.
Change-Id: I5821fdf1a4a65b252362277cc604ae913203f80e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Hop limit compression should be after next header compression as
per RFC 6282 3.1.1.
Change-Id: I0eaf3428bf835fe73831a7fe6fb708b73c8f5d12
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
net_nbuf_ll_src(buf)->addr and net_nbuf_ll_dst(buf)->addr should be
pointing to ctxt area not actual net_nbuf_ll region since the payload
over Bluetooth does not carry any ll addresses.
Change-Id: I87828d74abf2402fdf2a5e34aa8db93aa7c50d08
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the packet contains IPv6 header + Extra header + ICMPv6 headers,
last header does not contain 'next header and length' fields. So
while parsing header we should first check next header and continue
parsing. Otherwise we parse 2 bytes extra and set invalid ext hdr len
and handover to other layers. So everything goes wrong after that.
Also simplified next header parsing to minimal.
Change-Id: I5d8235c5a57c8b77adf6a07eb8eb74350a3e4dc6
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If the buffer contains IPv6 header, set header length only once.
Need not to set it in different scenarios.
Change-Id: I54ab9a4259851c9230db240f6091e3190d25b6cb
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
If RPL is not enabled do not handle RPL options in IPv6 extra header.
Issues will arise if we skip reading those bytes and continue further.
E.g. Upper layer protocol like ICMPv6 echo request does not prepare
proper echo reply if we skip like this. It doesn't know what options
need to be updated in reply header.
Change-Id: I250672a54d4c7f60727313f6e7f8fe902685d0c5
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Verdict not assgined to its proper value and return NULL in case
of read error. Also simplified error handling.
Change-Id: Idf4c5e242066dfd03e1519271dc1ba38ec43e6ce
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Verdict NET_DROP returned even though it handled properly.
Change-Id: I61e04b12f971b39585e983aa9a1007c63acd8b4e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Debugging code snippet inside handle_echo_reply() does not look nice,
just provided inline functions and simplified it.
Change-Id: Idc3a9284153aaa04d0431a9dd705c4f1c51b817d
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
