Change hard url into :ref: to board documentation
Change-Id: I9d8a585bb0e7274cf3233eadac2e303cc98ef86a
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
At the default sample rate of 400 Hz, there is not enough bandwidth on
the UART at 115200 baud to print every sample. Fix by decimating the
sensor data by 4 before printing to the console.
This issue was discovered after fixing ZEP-1507.
Change-Id: I451ec9873ca93fe417d5d5a2d6d13b5e921c7611
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Changed README to RST and updated the formatting.
Jira: ZEP-1537
Change-Id: I012854daff6883cf462a3cc0246c73a8767dcd66
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The headings on some .rst files were not following the expected
heading order of using # for h1, * for h2, = for h3, and - for h4
This patch fixes that, and the doc/templates/*.tmpl files created
for folks to use as templates for creating board and sample docs.
Change-Id: I0263b005648558d5ea41a681ceaa4798c9594dd9
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Printing values as <integer_part>.<fractional_part> gives undesired
results for negative numbers, so print the values converted to floating
point to avoid this.
Change-Id: I871b8461f2d643a2adce67df064e9f5e6d506319
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
If we receive 0 byte packets from the network, we need to
ignore those as otherwise it is possible to leak network
buffers.
Change-Id: Id4b5b0d03c0b6d1e16634ff2d1960ea4728c8aa1
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Because net_buf_frag_del() returns the next fragment in the list,
we can use the return value which makes the code nicer looking.
Change-Id: Ic3d0155417b52a34bfbaa918570ff9af95aee468
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Return and clean buffer when fragment can not be allocated.
Coverity-CID: 157590
Change-Id: Ic8844609da4049623a6cf0c2ae037b2b777542e9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Print assigned address and other information if client receives
anything from server. E.g. subnet, lease time and router.
Change-Id: I759d59522930401766452eb1fb3d57d1a8295a67
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
ENC28J60 has numbers on the board. Documentation has information about
signals only. Wiring will be easy with pin numbers.
Change-Id: I0afd6058a9417b679ef6358304737bf256aa3522
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
These logs are mandatory to spot buffer leaks. Unfortunately, they are
still not detailed enough to spot the actual place where the leak
happen.
Change-Id: If36dfa7a54aa1546fb268301f369b5ecd046e276
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
In case of a GET request do not error if there's no payload or queries
parameters.
Change-Id: I29b2225700c83a8a2dad166146288dd55bd8f3de
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This resource verify the capability of the server to send a response to
a POST including a Location-Query option.
Change-Id: I4b663e813eb713d7e93a3c2f8cfd58c335b24cde
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The CoAP test suite expects a specific path included in the
Location-Path option in the response.
Change-Id: Ib7616f9ad318fa93dc862f686429edb5084306e3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The Californium tests expects that all GET responses include the
Content-Format information of the response. In our case, all responses
are of type plain-text.
Change-Id: I08844825f31ed8f4c54020a41b9172cef5da6d70
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
So the sample zoap server application is more conformant, include the
token from the request, if any, in the response.
Change-Id: I5aacc1a3f81ebeaf473d327163c952b829489b01
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The Californium test suite considers an error responding a NON_CON
request with a ACK response, even if the spec says it is valid, so add
support for using the correct type of response according to the
request.
Change-Id: I211c8a135b8db83af442a1d645b7ea0826dbbdec
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This allows to verify that the CoAP server is able to handle a
blockwise PUT request.
Change-Id: I801e353a27b10a5266748591d023bcb607db6bb4
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds support for TD_COAP_BLOCK_01 and TD_COAP_BLOCK_02 tests,
which test that the CoAP server is able to handle GET requests with
blockwise tranfers.
Change-Id: Id0d1703adcf5d4e76dd1bc489c8bcc94a3fd90bc
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This resource is used to verify that the CoAP server is able to send
responses in two steps: 1. only acknowledge that the request was
received and is going to be handled; 2. The actual response, with the
payload.
Change-Id: Ia77cc0ee9805e6cc120c57f4598c68ad364882a0
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
DHCPv4 sample was running on main stack. Updated to run on its own
thread. Update config options (removed unnecessary ones and separated
few options for easy readability).
Change-Id: I3be38ca4cd4bcfa62e2613b90b104679cff2517e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This patch removes legacy configuation variables found at the
prj_arduino_101.conf file of the DNS sample application.
Change-Id: I74e370a7be177f809d805525cc18f594a59e38c0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
All sample applicatons in Zephyr, using the ENC28J60 driver, set
the ETH_ENC28J60_0_GPIO_PIN Kconfig variable to 19.
However, in the Kconfig.enc28j60 file this variable is set to 24.
That default value, 24, was used only during the first iterations
of this driver and never used again.
In this patch, we set the Kconfig variable to 19 and simplify
project configuration files by removing one line.
Change-Id: I3d5fd9da04a3f10845d2a409de56f5b9c235e995
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove CONFIG_GPIO=y for the Arduino 101 board. This configuration
is now set by default in the board configuration file.
See commit 8f96628064.
Change-Id: I6fa73a5785d78c51f03a0af48fc2aa8cc7636c7d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This is very handy for debug purposes. It provides us with a reassurance
that at least something is happening, even if initialisation does not
complete (hangs forever).
Change-Id: I6ac1bfec84f8a6694f82d14fdc5d2a27aa1fc634
Signed-off-by: Lee Jones <lee.jones@linaro.org>
The k64f has a random driver the TEST_RANDOM_GENERATOR config is not
necessary.
Change-Id: I73bc4076cac459388d9dd9bf3eb89c8cb5ba7db7
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Also remove dependency on STDOUT_CONSOLE, it is not being used.
Change-Id: Ib7488b1e2df3892c1daa2e12da05fcc1266ac9aa
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The original buffer fragments can be used to send back a reply directly
since Bluetooth doesn't add anything to then.
Change-Id: Ifeac0e6c3abbd527c79912abc5f5b833b0b52171
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
The idle stack already defaults to 256. The ISR stack size of 640 was
intended to make the app fit on 16k nRF51 variants and is now the
default, i.e. it doesn't need to be explicitly set anymore.
Change-Id: I8db3c080e1f84c65b27f931fa48c75bd90a2d3cd
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
HTML documentation shows misaligned text that may be a bit confusing.
This issue was caused by wrong indentation. Furthermore, board specific
instructions to build the image does not include any instruction header.
This commit fixes the above described issues.
Change-Id: Ie965e09f32f46a9d69aac28c4b389084f06b31b6
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the convert_to_double function and use sensor_value_to_double
from sensor.h.
Change-Id: I92ef4219057f431917f4c8e9d46d4ee2074b423b
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
Remove the type field from the sensor value structure. All values will
have the type previously defined by SENSOR_VALUE_TYPE_INT_PLUS_MICRO.
This simplifies the interface, as apps will know what value type to
expect. Apps that prefer to use double values can optain them using the
sensor_value_to_double function.
Change-Id: I3588d74258030eb16c3f89d8eead13cca4606b18
Signed-off-by: Bogdan Davidoaia <bogdan.davidoaia@linaro.org>
This makes it possible to setup a Bluetooth connection using net_bt shell
commands.
Change-Id: Ie4ae7e61345315ef987a00b6b5a28c0419f6b1c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
If the interface is not UP wait for MGMT event if that is enabled.
Change-Id: I4866c23d1e6f5b1a7cf212434d794673d7e756ce
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
CONFIG_NETWORKING_WITH_BT no longer exist, instead
CONFIG_NET_L2_BLUETOOTH shall be used.
Change-Id: Ide353b7620228e431c535768b37749994caf8e8b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
It was missing for arduino_101.
Jira: ZEP-1574
Change-Id: I08fc0961b94f5f7b1b787ebf52e7d9922e38006c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
TCP didn't actually have a way to signal synchronous receipt of a FIN
packet. Extend the recv_cb API to allow a NULL buf argument with
status==0 (by analogy to Unix's zero-length read) to signal EOF.
Update docs too, and also echo_server which wasn't prepared to handle
this situation.
Change-Id: I7dc08f9e262a81dcad9c670c6471898889f0b05d
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
The NET_SLIP Kconfig choice option doesn't really do anything for us,
plus we get warnings related to setting CONFIG_NET_SLIP=y in prj.conf
files.
Warnings like:
warning: override: reassigning to symbol NET_SLIP
warning: override: NET_SLIP_TAP changes choice state
So remove NET_SLIP choice and remove CONFIG_NET_SLIP=y in the prj.conf
files.
Change-Id: Ibccf9cf167f4c8a4df480ca0396bf83fcf60df1e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Rename cc2520 directory to hw and use it as generic
test application for the 802154 hardware driver.
Change-Id: I1c21505b7eb295279190f011a99c80e762178730
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Add common log level for all IEEE802154 drivers.
Change-Id: If92c96b14e630d4482aadf9cacb25662d6663399
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Reformat and consolidate the samples/net/README and dns_client/READMExxx
files according to the RST spec.
Change-Id: I735190245204854ac5527e18971cc4c6478423e5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Update the zperf/README.rst file with the following information:
- Homogenize the usage of "zperf", "iPerf" and "Zephyr"
- Update the Supported Boards section
- Clarify some instructions
- Add the Requirements section
Change-Id: Idfb29e2a5db9a78c19a6a27923f134583ebe5822
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Rename the project configuration files to pass the build.
The Makefile specifies the following format for the conf file:
prj_BOARD_PROF.conf. However, there are two files with the
following format: prj_BOARD_IFACE_PROF.conf. So, rename them
to avoid build errors.
Change-Id: I75e0d4169db881583b5f9a2b67deee46f66b6c97
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove commented line in the zperf/Makefile file.
Change-Id: Id869f21e923d3bb39fc31c5216ce29d78a0e1805
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the reference to CONFIG_NET_UIP in src/Makefile.
Change-Id: I960413c17496c4b70b9c171a54ccfca4951b858b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Update these scripts to explicitly call out python version 2. Some
distributions have started making /usr/bin/python version 3, and other
distros have expressed a desire to do the same.
Also use the
#!/usr/bin/env python2
construct instead of an explicit path so that the user can more easily
use their own python install by just placing it earlier in the path
Jira: ZEP-1548
Change-Id: I36dccc652353ba8bd58c483dba3ce61d3643de00
Signed-off-by: David Brown <david.brown@linaro.org>
Sample projects that pair the frdm_k64f board with a cc2520 require
additional pinmux settings beyond the standard frdm_k64f pinmux. These
settings used the private k64 pinmux API rather than the public pinmux
API.
Because the mcux pinmux driver now always supports the public pinmux API
(vs. the k64 pinmux driver which only supported it in pinmux dev mode),
we can convert the frdm_k64f_cc2520 projects to use the public pinmux
API and the mcux pinmux driver.
Change-Id: Idfae8393171b007d8629e34bfae64255f55c6792
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Removes unnecessary CONFIG_ETH_KSDK project settings from the net
samples. Some of the configs no longer exist (MAC0-2), some are not
valid (MAC3-5) due to RANDOM_MAC=y, and the rest are already enabled by
default by the SoC and board.
Change-Id: I27079b8bb142ebc507885f3b1de07e282c813506
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This patch moves pwm driver samples to samples/basic and also convert
documentation of PWM samples to RST.
Jira: ZEP-1536
Change-Id: Ib2b3ff8b1722a26618e9a6fe416e2138d82ca28b
Signed-off-by: Punit Vara <punitvara@gmail.com>
This will replace the current goal of 'make qemu' with 'make run' and
moves Qemu handling into its own file and into the boards instead of
being architecture specific.
We should be able to add new boards that support some other type of
emulation (by adding scripts/Makefile.<emu type>) and allow the board to
define their own options for the use type of emulation.
'make qemu' will still work, however it will be deprecated, starting
with this commit it is recommended to use 'make run'.
Jira: ZEP-359
Change-Id: I1cacd56b4ec09421a58cf5d010e22e9035214df6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These samples/tests fail to build on some of the nRF5x platforms. We
don't need Bluetooth enabled for these tests so we can reduce footprint
by turning it off.
Change-Id: I87e62a1d70f80d2bc22414d6a9e591e36ad9fa06
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add global option for legacy configurations and enable by default for
backward compatibility. Disable option on tests and keep it on legacy
samples and tests.
Jira: ZEP-964
Change-Id: I0831e2aa74d438b1ac74eb762186cb220a504beb
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Disk IO functions are used by both FS and USB Mass Storage.
This patch refactors those from FS directory to a separate one.
In addition existing, config options were modified to make
stuff meaningful.
Jira: ZEP-1276
Change-Id: Ia2a2e18f3dbbbdb964c3dc0427d8138ad86134cd
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Remove legacy option and use SYS_CLOCK_EXISTS where appropriate.
Change-Id: I3d524ea2776e638683f0196c0cc342359d5d810f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Various sensor samples are hardwired to expect returned sensor values
are represented as doubles. In each case this assumption is incorrect.
Introduce a generic sensor_value to double helper function and adjust
the samples to use it.
Change-Id: I89c788686576562b84e07a36064640231340c33b
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This will allow inclusion of documentation files that exist outside of
doc/ and will make it possible to add rst files across the tree,
especially for boards, samples and tests.
Change-Id: I7afcf92d99f504b2bc0b2b7e3452acb2f8e08294
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Cut wait times by 4, in chunks in 25ms instead of 100ms. This allows to
see what is going on, but with much faster transitions, which makes the
demo slightly less boring.
Change-Id: I32fdd6e41a9af1fe9aa8a8f186de7945986b3a71
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is easier to test the 15.4 layer instead of hard-coding sample
logic.
Change-Id: I2376dec3dad9e2ceca3f61bd88bf5709f1bc1390
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It's currently hard to find a Beacon enabled network. So let's switch to
active scan for now.
Change-Id: I192e7c3128f9488fb680ea7f23221b2b4aa52188
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will print-out the results, if any.
Change-Id: If988a6dc3c4504a8d4aa947d3d3f949870b638c8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Fixes two references to yaip that were were left behind after net/yaip
was renamed to subsys/net/ip. The zperf sample needs net_private.h, so
the include path is updated. The dhcpv4_client sample doesn't need it,
so the path is removed.
Change-Id: I189f1b58191524330254a5b7b31a9a4974956728
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
SW0_GPIO_INT_CONF shall allow boards to define the
interrupt configuration for SW0 without having to modify
the button sample app.
If SW0_GPIO_INT_CONF is defined set EDGE to it, otherwise
used default EDGE value.
Change-Id: Ia697e06debc341463ed9cdee1db564f3727d27e3
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
With LE Secure Connections the longest packet we require is 65 bytes
long: 64 bytes of Public Key data + 1 byte SMP opcode.
Extend the size of the L2CAP pool blocks so that they can fit such
packets and therefore one can use 70-byte
CONFIG_BLUETOOTH_CONTROLLER_TX_BUFFER_SIZE to achieve LE Secure
Connections pairing without HCI fragmentation.
Change-id: I2f11b4277ec5a24ceba79bccc7d84c64065b6e84
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Displays the present value of the indicators in the Handsfree
application.
Change-Id: I666ff2b15e70de8c1a26b902077d79c5c1a9d5fe
Signed-off-by: Sathish Narasimman <sathish.narasimman@intel.com>
The following readings were obtained after running the peripheral and
central_hr apps in qemu combined with the controller (hci_uart) on nRF51
and nRF52:
Main Stack 380
Idle Stack: 68
ISR stack: 532
Controller RX Stack: 388
HCI TX Stack: 516
The numbers set in this change provide a safety margin from the ones
measured empirically.
Change-id: Ice7ad7f081502e0ea1accf856a7937c0bf0783b2
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This port ipsp sample to use the native stack so it can be used once
again.
Change-Id: I7975b017b0aa5bd81a1701692ec81527e39d4701
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
HCI ECC commands are causing freezes in the controller build. Until
further investigation is done disable them to avoid issues when running
the controller standalone.
Change-id: Ifab0fa362348b72e88adaa5250c914770e4a70ba
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
For consistency with RX_STACK_SIZE and the rest of stack sizes, rename
to use the normal naming scheme.
Change-id: Ib8d484482466fa8d629e6329e07b927abdd6f598
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This helps simplify code that was previously combining net_buf_add()
with memcpy().
Change-Id: If44cf9cd651aba5e544e36567869f147468663eb
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
To customise test builds and support test related features such as time
stamps and a boot banner, introduce a Makefile variant that is dedicated
to testing.
Initially we introduce a new config overlay that is used for all tests, in
this case we enable BOOT_BANNER and BUILD_TIMESTAMP. This will print the
current version and the date, useful when reporting bugs and also an
indicator that the system has booted before the test has started.
For example:
[QEMU] CPU: qemu32
***** BOOTING ZEPHYR OS v1.6.99 - BUILD: Dec 21 2016 19:57:13 *****
tc_start() - Test Nanokernel CPU and thread routines
Initializing nanokernel objects
...
..
Change-Id: I224318cdeb55a301964ea366dbc577e2e3a09175
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Let's make net stack having its own level of debugging through sys_log.
It replaces NET_DEBUG by NET_LOG_ENABLED, which is then semantically
better: someone wanting to log the errors might want that not only for
debugging.
Along with it, CONFIG_NET_LOG_GLOBAL option is added, in order to enable
all available logging in network stack. It is disabled by default but
might be found useful when warning/errors need to be logged, so it is
then unnecessary to selectively enable by hand all CONFIG_NET_DEBUG_*
options.
It is possible, locally, to override CONFIG_SYS_LOG_NET_LEVEL by setting
the level one want to NET_SYS_LOG_LEVEL. This can be useful on samples
or tests.
Change-Id: I56a8f052340bc3a932229963cc69b39912093b88
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Re-instate the init_app()call which was accidentally removed by commit
commit 34f9391c9cf5 ("dhcpv4: Report address acquisition.")
Change-Id: Ic5ef70fd855a5bcb3ea1171de652994db493f4bb
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This will help to track only what's wanted (ipv6, tpc, udp, else...) if
needed to.
Change-Id: I5c2e5e582db629b5d0e1cd98004f693c50f532a4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
It will be thus possible to enable only the error logging, or the other
sys_log levels.
Change-Id: I0c0ed789f7cfbb4811320e8f8249151288274873
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
printk can do the job properly.
Change-Id: Ib743328e046bdb29be26adfe5cd007aaa758cd64
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When building the echo_client sample app, the following warning
is found:
echo-client.c:37:
echo_client/src/echo-client.c: In function 'send_ipv4_data':
include/logging/sys_log.h:108:20: warning: format '%d' expects argument
of type 'int', but argument 7 has
type 'size_t' ...
So, this patch changes %d by %zu to remove that warning.
Change-Id: I8a3822bca6d5988e531684d647de93bd77aabf9b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
When using SLIP for TAP networking between guest and host, the correct
option is CONFIG_NET_SLIP_TAP. CONFIG_SLIP_TAP only enables it on the
SLIP side, it should be enabled on the networking stack, as well.
Change-Id: Ie1dacd07eb5a0891a572b08268a865f05a373690
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When using SLIP for TAP networking between guest and host, the correct
option is CONFIG_NET_SLIP_TAP. CONFIG_SLIP_TAP only enables it on the
SLIP side, it should be enabled on the networking stack, as well.
Change-Id: I76226db9c587f1b5e9613244adab8f916ad94013
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Use the network management interface to catch and report IPv4 address
acquisition in the application.
Change-Id: Idd1bcaac90fffbd617600a7713206599e547826f
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Add build test to sanity_check to get a complex net app being built
for frdm-k64f.
Change-Id: Ib136f7964b65ad2167a3ed4484bff3bfe2a7ebad
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This moves the shell component into its own subsys and groups all
related files and options into a single place.
Additionally, one Kconfig option will now be required to enable the
shell:
CONFIG_CONSOLE_SHELL=y
The header files was also moved to include/shell/shell.h and can be now
referenced with
#include <shell/shell.h>
instead of
#include <misc/shell.h>
Updated documentation as well.
Change-Id: Iffbba4acfa05408055e9fd28dffa213451351f94
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
replace include <nanokernel.h> with <kernel.h> everywhere and also fix
any remaining mentions of nanokernel.
Keep the legacy samples/tests as is.
Change-Id: Iac48447bd191e83f21a719c69dc26233216d08dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The README.txt file is updated with information about wiring
and building. A testcase.ini file is also added by this patch.
Change-Id: I7354d844ac3dec41f0c9af02ede5da26f3ad0398
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The dev name for spi in the sensor sub-system was changed to
SPI_SS_x from SPI_x recently. Let's use the new name in the
sample app.
Change-Id: I78cdf21fce16290503c303e0de1432b4587486aa
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The addresses used by the client were still made reference to the types
used by the old network stack.
Change-Id: Iaba919cb072e3295c9b371cc8fe493284c5b523b
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
The legacy IP stack was removed from the source tree, so this changes
were made to adapt to the native IP stack, but this might not work on
the galileo platform due the ethernet driver not being tested on the
new stack on TCP, but to have the reference application ready when
it gets integrated
Jira: ZEP-1448
Change-Id: Ifa6ea0afb3bc532dfb92b09debbf6eee59e38a25
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The shell_cmd structure has three parameters and only two were
initialized. So, this commit initializes the remaining parameter
and also adds the ARG_UNUSED macro to avoid compiler warnings.
Change-Id: I667a4e9839ec5acd526df0bb465beb2062518315
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add ARG_UNUSED to some function parameters to avoid
compiler warnings.
Change-Id: I5db5bc536f1eeb084e08d2fbe4a8b0a8456e67a5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Also remove mentions of unified kernel in various places in the kernel,
samples and documentation.
Change-Id: Ice43bc73badbe7e14bae40fd6f2a302f6528a77d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Move logging out of misc/ to its own subsystem. Anything related to
logging and any new logging features or backends could be added here
instead of the generic location in misc/ which is overcrowded with
options that are not related to eachother.
Jira: ZEP-1467
Change-Id: If6a3ea625c3a3562a7a61a0ba5fd7e6ca75518ba
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
If we have Bluetooth or GPIO SCH we need multithreading right now
so disable any platforms that enable these features from running
this test.
Change-Id: I1ea35636e1382aac0f266fe73441619f9ac00d53
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove CONFIG_BMI160_TRIGGER_SOURCE_GPIO from prj config
file. It is not being used any more.
Also change CONFIG_STDOUT_CONSOLE to CONFIG_PRINTK. The
whole sample is using printk instead of printf.
Change-Id: I4ac7db37da1e45aed2457ace9e82385e37143c36
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Removing useless options, refining the logging and of course setting the
right IP to make it work.
Change-Id: I0c0c1979d590bc4c4fcb3a1d1a252b87b0153511
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
When zephyr receives a 15.4 frames it allocates 1 RX buf (nbuf) and 1
DATA (buf), and it gets queued on net stack for post processing.
Problem: receiving a lot of frames is just completely nominal and very
fast (timing is critical in radio, and the rx thread of the radio driver
has a high priority, much higher than net stack's rx post processing).
So guess what happens when CONFIG_NET_NBUF_RX_COUNT=10 though let's say
12 packets are coming in?
The RX buffer pools gets empty and soon the system hangs on getting a
newly allocated one.
This proper CONFIG_NET_NBUF_RX_COUNT tweak fixes the issue, however some
future work will reduce the need of so many RX meta buf:
- l2's recv could be called right away at net_recv_data, before queuing
the buffer for post-processing, but this could affects reception
timing on radio side, which is critical.
- An l2 pre-processing (in the middle of what current l2 recv does)
could be implemented, it would be technology depenedent (aka: not
mandatory on all l2) and could quickly decide what to do and at best
drop the whole, or at least drop the RX meta buf (frag would still be
kept). Let's see.
Jira: ZEP-1427
Change-Id: Ic75b02efa36e35b450c02b3e6439a8d73f03f839
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This patch adds the project file for the FRDM K64F board, it also
updates the README_IPv4 file to include instructions for using the
DNS resolver with the FRDM board.
Change-Id: Ic9b92c2fed2636b56044309dc3be7c829d828d35
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
enc28j60 can work up to 25Mhz, let's set a divider of 2 on the 32Mhz
host clock then. This require to mimic CS with a gpio in the SPI driver.
Change-Id: I98f84fa793a614cdbb566be39a262ff825101255
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This will help testing dhcpv4 through frdm k64f ethernet port.
Change-Id: I7cf47d77b79041fe7ab408355d1a9f9332fc1f54
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This helps to test enc28j60 along with dhcpv4
Change-Id: I884f0aba0a04c3cc0d015d327cb9c100759d45ea
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Removes left over CONFIG_NETWORKING_WITH_BT which has been deprecated.
Change-Id: Ida3a2c2dba6e44f112711170f883c0582c3ee7ed
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Fixes echo_client and echo_server samples.
Fixes compile error:
...
src/built-in.o: In function `fdrm_k64f_cc2520_pinmux_setup':
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
samples/net/echo_client/src/../../common/cc2520_frdm_k64f.c:93:
undefined reference to `_fsl_k64_set_pin'
...
Change-Id: I590f88f6bd083a30deea77fa860f001a3a55b278
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit adds the DNS client section to the samples/net/README file.
Added text includes a quick description of the application and
references to documentation already available in the tree.
Change-Id: Ia7ef3aea19069df5be2d8f14344b1afa750b22bd
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit adds the ARG_UNUSED macro for the status variable in
the udp_received callback.
Change-Id: I8c592cab72ccf5ba314742ef705e96d4a4d067e9
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit validates the size of the buffer used to store the
incomming datagram in the udp_rx routine.
Furthermore, two expressions related to the rx net_buf are now
executed before returning on error, avoiding a possible memory leak.
Change-Id: I30dc0a2d57dc207590387f1a9ab79945a1157ef5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The DTLS client will use and asynchronous signaling method to
receive, this makes the sample work on QEMU
Jira: ZEP-1233
Change-Id: I28f074c4736f84c10e6be8119a5ba50b138fcc0d
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Previously, the domain names used in this application were
not very useful to proof that the DNS client was able to handle
multiple IP addresses.
In this patch, the number of domain names is increased. Some of them
may return multiple IP addresses as shown in the README_IPv4 file.
However, results may vary depending on the network setup.
Change-Id: Ic713ce48b4afa592c1480311f4394de6e57bf3fb
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch introduces a k_sem that will block until:
- data is received, or
- the user-provided timeout expires
This change allows us to simplify our previous DNS client
implementation.
This change is related to ZEP-1357 because we are refactoring the
DNS client API removing the continuous update of the net_context_recv
routine that seems to be causing issues after the kernel's update.
Jira: ZEP-1357
Change-Id: If01c9274ac8f096f0095a2872f86be2e007212ee
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit introduces the dns_context structure.
This new structure will reduce stack overhead due to
the simplication of the dns_resolve routine signature.
Furthermore, the timeout parameter is now int32_t
instead of uint32_t.
The dns sample application is also updated.
Change-Id: I5d789656bacbd23c4654edce5d116a88dc42c354
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This enables Bluetooth L2 driver with CONFIG_NET_L2_BLUETOOTH and
removes CONFIG_NETWORKING_WITH_BT which has been deprecated.
Change-Id: I6a75c105e45a1b748abf6a70234d415c5121bcdc
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This enables Bluetooth L2 driver with CONFIG_NET_L2_BLUETOOTH and
removes CONFIG_NETWORKING_WITH_BT which has been deprecated.
Change-Id: I6f8b0e756f6e066b4b9cf9dec22f52fd72155c98
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Common code found in samples/net/common
App is built with:
make BOARD=frdm_k64f CONF_FILE=prj_frdm_k64f_cc2520.conf
Note: debug messages are enabled on many parts of the system, and these
are killing the timings. So it's not unusual at all to see rx errors on
cc2520 side. Without most of the debug, much less error will occur (if
any when dbg is fully disabled).
Change-Id: Ib6f0868c300652270661e72e80108804308164ab
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add support for resuming from deep sleep on the ARC.
Change-Id: Ic1e17e318a1121ac3c5ac2b6fb86ba00c78fd872
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Directly use AON GPIO trigger instead of IPM.
In the past, SW did not allow arc to receive AON GPIO interrupt.
So, interrupt from BMI160 was routed to x86 cpu. Then, x86 cpu
passed the event to arc through IPM. But, SW was updated and arc
is able to directly receive interrupt from AON GPIO now. So, IPM
is not needed any more. Both IPM and GPIO triggering code is there.
We just need to change the configuration by modifying the prj
config file.
The x86 code will be removed since it will not be used any more.
Change-Id: Ibc4250a34218cc52bf4c726cf70617cfdea3b2e8
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Adds extern "C" { } blocks to header files so that they can be
safely used by C++ applications.
Change-Id: I767a04635b38d8ef7a02e8c7da3a5c99b0bc7709
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
There are static initializer macros available for most kernel objects
which we should use whenever possible.
Change-Id: I496f4d05d26801eddd21fae53bdd4fcdc3246fe3
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Moved all libc Kconfigs to where the code is and remove the default
Kconfig for selecting the minimal libc. Minimal libc is now the default
if nothing else is configured in.
Removed the options for extended libc, this obviously was restricting
features in the minimal libc without a good reason, most of the
functions are available directly when using newlib, so there is no
reason why we need to restrict those in minimal libc.
Jira: ZEP-1440
Change-Id: If0a3adf4314e2ebdf0e139dee3eb4f47ce07aa89
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
nano_cpu_idle/nano_cpu_atomic_idle were not ported to the unified
kernel, and only the old APIs were available. There was no real impact
since, in the unified kernel, only the idle thread should really be
doing power management. However, with a single-threaded kernel, these
functions can be useful again.
The kernel internals now make use of these APIs instead of the legacy
ones.
Change-Id: Ie8a6396ba378d3ddda27b8dd32fa4711bf53eb36
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The format string passed to printk is trusted, and this is just sample
code anyway.
Change-Id: I267e1e3a9b6720c4216624bf0c2590ce42c6c681
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
In order to keep the initialization process light-weight, remove
net_buf_pool_init() and instead perform the initialization of the pool
and buffers in a "lazy" manner. This means storing more information
in the pool, and removing any 'const' members from net_buf. Since
there are no more const members in net_buf the buffer array can be
declared with __noinit, which further reduces initialization overhead.
Change-Id: Ia126af101c2727c130651b697dcba99d159a1c76
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reverts commit 7a74fb0454.
This commit breaks the sample. The sample code has a bug which will be
addressed in a separate patch.
Change-Id: Ic44faeafced4415765fded04e2493e306fc35331
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Restructure the RANDOM Kconfig to match the structure used in other
drivers with a single top level menu. Move the true random number
generators to appear first in the menu, with pseudo generators at the
bottom. Do not present pseudo generators if a true random generator
is presented.
This change implies that tests, samples and applications that require
the random driver interface must now select CONFIG_RANDOM_GENERATOR.
In order for tests and samples to build (and run) on platforms that
have no random driver it remains necessary to select
the CONFIG_TEST_RANDOM_GENERATOR.
Note that CONFIG_TEST_RANDOM_GENERATOR retains its original purpose of
enabling a random driver that delivers non random numbers for the
purpose of testing only.
Change-Id: I2e28e44b4adf800e64a885aefe36a52da8aa455a
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Remove CONFIG_TEST_RANDOM_GENERATOR from each test and sample where it
is not required.
Change-Id: I949f8e93c2cb1881622a5e48efeb87c43122a170
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
Remove SENSOR_VALUE_TYPE_INT as it is the same as
SENSOR_VALUE_TYPE_INT_PLUS_MICRO with val2 set to 0.
Change-Id: If5a9c579b7267701c27f40fd887acae47d64edc5
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Remove SENSOR_VALUE_TYPE_Q16_16 as it is not used by any driver. Future
drivers can use any of the remaining value types.
Change-Id: I984143cc65d6a6fd0477f310ac17c62498cc05b8
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Until now it has been necessary to separately define a k_fifo and
an array of buffers when creating net_buf pools. This has been a bit
of an inconvenience as well as blurred the line of what exactly
constitutes the "pool".
This patch removes the NET_BUF_POOL() macro and replaces it with a
NET_BUF_POOL_DEFINE() macro that internally expands into the buffer
array and new net_buf_pool struct with a given name:
NET_BUF_POOL_DEFINE(pool_name, ...);
Having a dedicated context struct for the pool has the added benefit
that we can start moving there net_buf members that have the same
value for all buffers from the same pool. The first such member that
gets moved is the destroy callback, thus shrinking net_buf by four
bytes. Another potential candidate is the user_data_size, however
right not that's left out since it would just leave 2 bytes of padding
in net_buf (i.e. not influence its size). Another common value is
buf->size, however that one is also used by net_buf_simple and can
therefore not be moved.
This patch also splits getting buffers from a FIFO and allocating a
new buffer from a pool into two separate APIs: net_buf_get and
net_buf_alloc, thus simplifying the APIs and their usage. There is no
separate 'reserve_head' parameter anymore when allocating, rather the
user is expected to call net_buf_reserve() afterwards if something
else than 0 headroom is desired.
Change-Id: Id91b1e5c2be2deb1274dde47f5edebfe29af383a
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Disable MDEF option and set it only in legacy projects.
Change-Id: I2e1f011eb1f876af929140e36f71f0efb5e955c1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Correct some syntax error and update some comments. There is
no functionality change.
Change-Id: I86c922c8aabcc4464b86f33ad7edf6056b1d765c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The gpio device driver name for the sensor sub-system was
renamed to GPIO_SS_x from GPIO_x recently. Let's use the
new gpio driver name for the sensor sub-system in the app.
Change-Id: Ie06b072d31e23e74c3ac41a4590845b24a020ed1
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The random driver, if enabled, is initialized by the kernel
initialization function. There is no need for applications or tests
to re-initialize the driver.
Change-Id: Ib4712dda937a7a83a8079c8aa662cec03c5416f8
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
The sample was reading the sample values regardless of return
value of the fetch sample function, now it exits the function and
prints an error message
Coverity-CID: 157576
Change-Id: If9a909ed9b617357a032c5632ac04984846d6744
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Remove two configuration parameters related to gpio used as spi
chip slect from prj config file. since they are already in
arduino 101 board config.
Change-Id: Iebaab605d8a6394e27c70ebbf4bac37a24665522
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This sample fails if the main stack size is 1024, so this patch
increases the value to 1280.
Change-Id: If5e21c09234e2ca8178e8dde684361844fababca
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Fix compilation issues that show up if SYS_LOG is mapped to printk
instead of printf. Unlike printf, printk is annotated so that the
compiler catches incorrect format specifiers passed to it.
Change-Id: Iab7cc6da110e9c98720211a6f773dcf055a3a411
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This patch adds Beetle to the Watchdog test case.
Jira: ZEP-1300
Change-Id: I371ca2f89aaec8e07f45cfa04fc2618d009cf487
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@linaro.org>
Fixing a tiny build error found through sanitycheck.
Change-Id: Iee9a3ac135380ddf70e2902b532f6f28d417715c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adds a fxos8700 sample application that uses the sensor data ready
trigger to periodically print accelerometer and magnetometer data.
Change-Id: I43fef6cd6090b58d8d0168a25558a3a05781ea5d
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
This allows to fine tune TX stacks size depending on selected HCI
driver. If needed it can be used to tune for monitor too or other
logging mechanism used.
Change-Id: Ib501921da0b786e151083760d85ec58fe3c08b60
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use BT_STACK_NOINIT for tx stack declaration. This makes sure stack
it properly alligned and account for k_thread overhead.
Change-Id: I704958fcc3ce02aba913f6eaee13ae50d2a81591
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
bt_enable_raw() needs to be called before spawning the tx thread,
otherwise there might be an HCI command processed from the UART
before the HCI driver has been opened and therefore initialized.
Change-Id: I050158bd48bebaf8fa2cf6b11efb54b531f70079
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
From stack_analyze function, used isr stack is 368 bytes
with the controller build, main stack is 288 bytes and idle
stack is 56 bytes. Hence, configuring sizes of 512, 512,
and 256 bytes for isr, main and idle stacks respectively.
Increased max connections from 16 to 20 utilizing the RAM
free from the reduced stack sizes.
Change-id: I67d073fd1893cafc53d36e89035a6fd931488a46
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Implement the 2 HCI commands that provide ECC public key
and shared secret generation:
- LE Read Local P-256 Public Key
- LE Generate DHKey
Jira: ZEP-1246
Change-Id: I79388bfdb9f2e28b9377b4bb6ee2caca25f33f3e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
CC2520 is not embedded on an arduino_101, it is however possible to wire
one, and thus it requires to provide cc2520_configure_gpios() function.
This one, being common to a101 is found in samples/net/common.
Change-Id: I86f2734847edb3f6a968522afccc3099ed854d13
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Commit https://gerrit.zephyrproject.org/r/#/c/6971/ changed the
location of some include files, making compilation fail.
Change-Id: I43c124be28b55e550ef2204ca9faa7031665fb4a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This commit updates the dns client application to use the
new kernel API.
Change-Id: Ibf920532b02a1561bfb38f69e5dd994ab21574bc
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
* Moved networking code into subsys/net.
* Renamed net/yaip to net/ip at the same time.
* Fixed the tests/net to compile
* Fixed the Makefiles and Kconfig files in subsys/net
to use the new location of the IP stack
Change-Id: Ie45d9e8cb45a93fefdf969b20a81e3b1d3c16355
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Port the zperf network performance tool to native IP stack.
TCP support is missing from this version.
Change-Id: I2648e7d81014bb0cae8cf50854b0ae5f89a6567c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we cannot send a network packet, do not quit as that is
really not necessary here.
Change-Id: I7613d46bdbc849b75aaf0fc71c58beba810fd658
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
As the default board is qemu_x86, make sure there is similarly
named config file that can be used by default.
Change-Id: Ibc480d3b4eecc2601e3670c8da19be9c01833c36
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use by default a board specific config files for both
echo-server and echo-client sample applications.
This makes more sense than using the network technology specific
config file that was used earlier.
Change-Id: I155fc138f4b0ed1166f4e25267513afc3fb6fd76
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Remove legacy stack artifacts from the echo-server and echo-client
config files.
Change-Id: Icc591b9540495c4ee181517369b0df9bb91972bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This enables application debugging using qemu target:
export QEMU_EXTRA_FLAGS="-s -S"
make qemu
Was tested with echo_server
Change-Id: I1906dea2fbc5afe03b11729d2edb8f3629a629f8
Signed-off-by: Ruslan Mstoi <ruslan.mstoi@intel.com>
As the native IP stack is now the default, there is no need
for corresponding Kconfig option.
Change-Id: I08e4992f540f928a2b7378e8803e634e38725348
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit removes the old MQTT and NATS publisher and subscriber
applications that were based on the uIP stack.
Change-Id: I7ba8e155e32ba0aa53c8dec1b6c0cc5170d70943
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit removes the legacy Contiki based uIP stack.
The new native IP stack must be used after this commit.
The commit also removes following things:
- legacy cc2520 driver
- legacy ethernet drivers
- legacy IP stack samples
and changes these things:
- disabled tests that only work for legacy IP stack
- select new IP stack by default
- enable random number generator by default as it is needed
by the new IP stack
Change-Id: I1229f9960a4c6654e9ccc6dac14a7efb9394e45d
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
My IPv4 address was missing because of complex set of #ifdef's.
Change-Id: I6768587d3e104a57c10756bc43267f26068aa3cb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Nbuf data size needs to be set to 128 bytes, specifically for
wpan sample.
Debug output kills timing, and thus can generate spurious failures on
reception, so limiting it to errors by default.
Change-Id: Ia918361d07369dacbe577e26855d7ef6ed865f7b
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The used IPv6 or IPv4 address can be set in the config file.
This way one does not need to edit the source file to setup
the desired IP address.
Change-Id: Ic900bd4694481b4b035026ad0ba7b9280eb84e4a
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Let the echo-server listen any configured IPv4 address
by default.
Change-Id: Ib83c5e069ae1e26615c37fa980bc4009b5a5e40c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If user has enabled DHCPv4 support, then do not try
to set static IPv4 address.
Change-Id: Ia359f578044d72b951f53c509c92c09d575207f0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If we want to receive packets to multiple addresses, the solution is to
listen on the ANY address, and add the address to the interface in
question (already done).
Change-Id: I383cc1401f1236ee05bdb010252a9f9909aa15bd
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Before using the LED we must set the direction of the GPIO pin to
output, and the LED will turn on when that GPIO pin is 'low'. So, for
our purposes, the LED is active low.
Change-Id: If8e6ce05ff2f3ddb7b17a87b172a91f7276194a4
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
'board.h' includes the definition of LED0_GPIO_PORT and LED0_GPIO_PIN,
without this include the fallback was used, as if the board in question
didn't have any LEDs.
Change-Id: I78ebdb2e2ffc41dff5011dcf9e33e09d70950e81
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This adds a configuration profile allowing this example to run on a
Quark SE C1000 devboard.
Change-Id: Ic04fd30a91ed0a1fc8c3a3b3a6e397f0722f50b1
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Nbuf data size needs to be set to 128 bytes, specifically for wpan
sample.
Debug output kills timing, and thus can generate spurious failures on
reception, so limiting it to errors by default.
Change-Id: Ia0b8c904e0bc66a7922af4f317db623db6c51462
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This adds the required code to echo server so that it works with TCP as
well.
Change-Id: Ib45dd91a52a60ddb4d8f0ae11175ceb52199c398
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
Including shell allows to execute some kernel commands and make sure
system is not crashed.
Change-Id: I6157229614655dc7e523f1cf0f84ee7c58d7a717
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Due to huge delays with DEBUG log level change it to INFO.
Change-Id: I81caf78fc6e9e064c2ed8e18caa99351028af62a
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
In a case transmit is failed send ack to the driver with zero sequence
number which is not used for valid seqs.
Change-Id: I1047de9ab5de636c5a8983f31376046757c4dc0c
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Following replacing semaphore with timeout semaphore transmit may not
be finished returning error after which communication stalls. Allowing
3 retransmits solves the issue.
Change-Id: Ibad05c2eac43dd6bb0ed72aaf16a7a2ef4185067
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Having 1024 bytes was really unsufficient and creating a lot of weird
bugs everywhere.
Change-Id: Ib642744fa6dfc9f3a699a0dc2f0c1783dc6f87b2
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Semantic has changed in k_sem_take in comparison with legacy
nano_sem_take.
Change-Id: I06129b6f15f66266919bf371c2358e5634109156
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This is meant to test echo applications with 802.15.4 L2 directly in
qemu.
Change-Id: I0edccd8c39360421dc77e0064147221d86877bdf
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Previous commits support auto configured IPv6 addresses so no
need to manually tweak the address settings.
Change-Id: Ie641212981a04229721c84990a54876977d9cfc4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This commit fixes the case when we receive large amount of
data and then copy it into new fragments. If the MTU is larger
than the fragment size, then it is possible that we might
overwrite net_buf memory and crash. This is typical in ethernet
network.
Change-Id: Ib1c65819c3bc718ec04f558e3df235246b5655dd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The DTLS client will not longer use the legacy IP stack.
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I7402a188fc7501873d98d3b6cb2f03ee51f3506b
This commit allows echo-server to listen all defined addresses
specified to its network interfaces.
Change-Id: I52874210f6987c75d7921e514399a9eda55911bb
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
SLIP buffer size depends on maximum IEEE 802.15.4 frame size and start
byte.
Change-Id: I1cb0a848dce6b0c85bf11408733d777f7a3b03c9
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Remove unneeded SET_HW_ADDR_FILT since it is handled by other
commands and add missing opcodes.
Change-Id: I4b6488e6cee742b79c16789e817795138506dc77
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
It's 127 by default as soon as 802.15.4 l2 is selected.
Change-Id: I6c29d88bb3277a15fe54693027caf320bc3d9fc4
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This demo showcases how to expose resources that are exposed using the
link-format feature.
Change-Id: Iad9421082fae3212cae58e6d6e9b88fa170678b8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Forcefully set the IPv6 address in echo-client so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: Id24f9aa84b30a3da941bb6b9e4522c7218687e12
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Makefile modifications to be able to be compiled with the unified kernel
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Change-Id: I0fce5d3f6b28df0cff4b7c0b554a787996e8c966
Print packet hexdump and interrupt related debug only when
VERBOSE_DEBUG is enabled.
Change-Id: Ieb997e3537a9a2316d1435372948004dd93babab
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Update information related to simple web server info.
Change-Id: Ib0155c116a3d53b374a7401eb6e9d1599390dba3
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Print packet hexdump only when VERBOSE_DEBUG is enabled and remove
debug print in empty functions.
Change-Id: Ifd3ae59001233f0237c4b7575bd92607c93e2ea0
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Forcefully set the IPv6 address in echo-server so that we
can use that address when sending data. Normally this should
not be done like this as the system should autoconfigure itself.
Change-Id: I99041539c50f994f5d3ddaabaf5cac8599d82078
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is a sample app using ECJPAKE crypto algorithm on DTLS, using mbedTLS,
native IP stack and the enc28j60 SPI Ethernet Driver
Change-Id: I658c3d9a54cfdd164a4147903125400f223c6e0a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
It is the responsibility of the callback to release the buffer.
Change-Id: Id80f5f9ca190868a7c173994bb7ec7ee7f6251b7
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
When retrieving the address of a peer from the net_buf, care should be
taken so it happens before the 'data' pointer of the buffer is modified,
which causes the macros to retrieve the address from invalid positions.
Change-Id: I466fb989119ab5f7d0ac3899979670675bdaa946
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This change is related to patch called
"net: Adapt to new behavior of net_buf_frag_add"
This version removes extra net_nbuf_unref() from
the code. The unref was done because net_buf_frag_del()
did not remove the double ref from the list element.
Because of the other patch, the list does not have
double ref any more, so we need to remove the extra
unref in couple of extra places.
Change-Id: If90e01c24b9b4e68afbfa283850d2a1ecb3065ed
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change definition name suffix to WPANUSB
Change-Id: I3456ebff061866a67b7a07b33f6ff83a31a2d7a8
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This commit updates the README files to reflect that ZEP-1036
is already solved.
Information about ZEP-1097 and ZEP-1098 is now included.
Change-Id: I3c83160962d308d374823e086bbf083dca988606
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit modifies the conf and Makefile files of the DNS client
application.
Inside the Makefile, the CONF_FILE variable is updated to include
the BOARD name, therefore prj_'board_name'.conf is used from now on
to refer to the conf file. The right conf file is selected by passing
BOARD='board_name' to make.
Configuration variables at the conf files are also homogenized.
Change-Id: I6f5aaad0b52d458bceb90b315aba2b31f085c0a0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Implement serial-radio protocol used in Contiki-based border routers
to interact with 802.15.4 devices connected over serial or USB-serial.
Change-Id: I938b34ca32ae7a08e5d48e3bea585cda6c98c113
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This creates initial TCP handling logic but does not yet
enable fully working TCP connection.
Some of the connection logic is taken from FNET TCP
implementation.
Origin: FNET 3.6.1
URL: https://github.com/butok/FNET/blob/master/fnet_stack/stack/fnet_tcp.c
Change-Id: I1e100d9fa9c91437562b933d94d0bd3db1a5885e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Current net_nbuf_write() api just appends data to last fragment. And
doesn't write data based on offset. That's why renaming this api.
New net_nbuf_write() apis based on offset will be coming soon.
Change-Id: Ie8e13e5f6091a279b62b6d8b0b3928a5187e75b0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
This commit adds support for the Arduino 101 board with the
ENC28J60 Ethernet module.
Change-Id: Ib852e9cfb2b3b2188d3320e00d6bc24620e187f5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This is a sample app using ECJPAKE crypto algorithm on DTLS, using
mbedTLS, and native IP stack
Jira: ZEP-900
Jira: ZEP-943
Change-Id: Ica17b047aab11b989d3e8c8f6ac1b79e3041053a
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
This ports zoap to the native stack.
Just for reference, and totally not scientific, here are the numbers
using the old stack:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
34657 10316 16916 61889 f1c1 outdir/qemu_x86/zephyr.elf
With yaip:
$ size outdir/qemu_x86/zephyr.elf
text data bss dec hex filename
30575 9148 6164 45887 b33f outdir/qemu_x86/zephyr.elf
Jira: ZEP-818
Change-Id: I7992a3e2af7d419081ee5a64d7cc2d49fb628ead
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Extends the echo server and echo client samples to work with YAIP
network stack with ethernet L2 layer and ENC28J60 ethernet device
on Arduino 101 boards.
Jira: ZEP-859
Change-Id: I242e5555aff18741bf00a551424b081b5396f4b3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
This commit adds the DNS Client sample app on top of the new native
IP stack. This sample app supports IPv4 and IPv6. See README_IPv4 and
README_IPv6 files.
Origin: Original
Jira: ZEP-793
Jira: ZEP-855
Jira: ZEP-975
Change-Id: Id78bd634c44e216fd45b395c91d95b71ef68c976
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit removes the legacy DNS client sample code.
This patch is part of a commit series that will add support for
DNS client services on top of the new native IP stack.
Jira: ZEP-793
Jira: ZEP-855
Jira: ZEP-975
Change-Id: Ieb3366b21a365b8f77e576109c64c0fc4218aabb
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
In some cases the BT header files are missing and the compilation
will fail when done by sanitycheck script.
Change-Id: I484e1f0c23975053e947bc57ff3c9f4042fad71e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Export ieee802154 radio over USB to be used in other Operation Systems
like Linux. In this scenario Linux SoftMAC driver would be used
implementing ieee802154 stack inside Linux.
Currently tested to work with Raspberry Pi and addon ieee802154 board.
Change-Id: Iabcbbfcaad8e3935a63faca50a19fb624e78a351
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
This will use the dedicated UART pipe driver to send/receive IEEE
802.15.4 "radio" frames.
- make
On one console:
- make qemu1
On a second console:
- make qemu2
Note:
net-tools is needed, cloned into net/tools
https://gerrit.zephyrproject.org/r/#/admin/projects/net-tools
Change-Id: I833cd40238b0653bb5b9a9b462fb4d5d2a3504b9
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- net tools directory is now in net/tools
- fixing the 80 chars line limit
Change-Id: I079880fa3449beffb326369ab23550dcba3ccf20
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
More samples will come. Current one is meant to test ieee802154 with
cc2520 on quark_se_devboard target. Some future sample will show how to
use the Qemu uart pipe fake 802.15.4 radio driver for testing on one
host.
Change-Id: Idea2b16cde091c7da926ca8aa71912fbfd0a3d62
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If no IP stack is seleceted, selecting one of the 2 cc2520 driver will
automatically select the relevant stack.
Change-Id: Icca22da190dc790ce6d302e14c45732f902e02ae
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
- new stack options are renamed and placed in their respective menus
- new stack Kconfig gets normalized (tabs vs spaces, etc...)
Change-Id: Ia68f6589fed464bbdd76dc0812775684b2f94a58
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Add socklen_t addrlen parameter to net_context_bind(),
net_context_sendto() and accept callback.
Currently the address length option is not really mandatory
as we can figure out the length from the address family.
But if we are going to support other protocol address families
it might be needed.
Change-Id: I59206465c3259050c469c5b2150221646a9a08d7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv4 address to be 192.0.2.2. The host
IPv4 address should be set to 192.0.2.1 in this case. This change
is similar to IPv6 address change made earlier (now both IPv4 and
IPv6 addresses on device side end with "2", on host side, with "1").
Change-Id: I639b7be4403b4b2f38f01675d0ef56eaabf0f82c
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
When running echo-server in the Zephyr device (either a real
device or qemu), set the IPv6 address to be 2001:db8::2.
The host IPv6 address should be set to 2001:db8::1 in this case.
Change-Id: Ia967cecabece4b06a2f5a12b11c68a9de4aeb2af
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The prj_slip.conf file should be used for qemu-to-host
communication only. It is not usable for testing between
two qemus.
Change-Id: Id06813a1b36f33f585e06df3f29479891ea3d2d8
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Fix the correct location of net-tools project files to
samples/net/README file so that the user can test the
echo-server and echo-client apps using SLIP and Qemu.
Change-Id: Ic34fa6e67da916c63e4f138e1e0def5d7632c80c
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Debugging messages in 6lo are enabled as well.
Change-Id: I8fea044216e3c4e60d742ebc7256489832ae09ac
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Meant to setup a real 802.15.4 device, changing channel, pan id, etc...
Change-Id: I221ad197aa221bc8f9ec67d0fd523da2023f7979
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Echo-server no longer reverses the data as doing it
when we have a fragment chain is quite challenging.
Change-Id: I298669f3ddba67000672320e7b3b14f72e9f12d4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
net_context.h is missing and one variable had a wrong name.
Change-Id: I4aac2f5c12cea39553fb86d1bd497c88f0ef1963
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This allows to test things between qemu and host when
using slip.
Change-Id: I27e17de9f0d8c2c8406f0afdd66c295e827f87a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 192.0.2.0/24 address space that is specified in RFC 5737.
Change-Id: Iff2545f5b0f4817c99813c986d57801e166967a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This implements a modified version of CDC ACM class driver
in a WebUSB compatible way. It adds the WebUSB descriptors,
custom and vendor requests handlers so that the host OS and
browsers can get the required BOS descriptor and supported
origins from the device. It also adds a custom interface
class so that the interface will not be claimed by the host
CDC ACM driver.
A simple echo app also included in this commit to demonstrate
how to create and use a WebUSB interface, as well as the
communication between browser and WebUSB enabled device.
WebUSB Spec: https://wicg.github.io/webusb/
Origin: Based on CDC ACM device class driver in Zephyr
Jira: ZEP-744
Change-Id: I2eac10bd718e8fce35cda52e7c2ac425c3210e23
Signed-off-by: Sudarsana Nagineni <sudarsana.nagineni@intel.com>
Tag all legacy kernel tests and samples as such.
Change-Id: I43b24acb71c282ed14ff6e6ef06c9542bad86f6a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Exiting from the test case when the i2c device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ib11224ef2a78170f6e4d20545f645b4f2ea4a181
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference.
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I7aafbc993674c8874a16b5a9213108f5769114ec
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Removes a redundant check flagged by coverity.
Coverity-CID: 152005
Change-Id: I8cc3a64c42e04a2d52deed11d9022ed4a49baaa7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
By adding external hook to sys_log we will allow applications
the flexibility of using various output mechanism such SPI,
flash, FS etc.
Jira: ZEP-1172
Change-Id: Ie32a5e52c3946ada0349b75a35cc107bb29385a1
Signed-off-by: Yossi Havusha <yossi.havusha@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove nano kernel references found at the README files.
Change-Id: Id42f4797561f3d7674110bb84531b5f6e487decd
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This commit replaces the x86 asm line:
__asm__ __volatile__ ("bswap %0" : "=r" (x) : "0" (x));
by the sys_cpu_to_be32 macro.
By removing the x86 asm instruction, the nfc_hello sample app
can run on other platforms.
Jira: ZEP-1348
Change-Id: I440e96cd06e70a88552d179a2288c9918e6ca0b0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
To have one project use more than 32 priorities. The preempt priorities
are also aligned so that they straddle two priority bitmaps.
Change-Id: I0f0862110d876e40fde45a0d105b769e8603d644
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
If an i2c transaction fails the sample will hang the program into
an infinite circle.
This commit will remove the infinite circle and report back the
error code from the i2c transaction.
Change-Id: I38d350a805af6bec43f2fa8d4af6ce4e3cc27662
Coverity-CID: 151991
Coverity-CID: 151992
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
If the gpio or spi devices are not found there is no
need to keep the device busy in a loop for this particular
sample.
Since it is not possible to continue execution it is better
to simply end the application.
Change-Id: Ie25ea970a479db2a2f339ca2b37f88541a45ef97
Coverity-CID: 151973
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Fix usage of an uninitialized variable detected by Coverity.
In theory GCC should pick up this situation, but it does not. I've
experimented with adding -Wextra and -Wuninitialized but I cannot get
GCC to complain. I might be missing something else, but in the
meantime, this is a simple fix to remove this issue.
Change-Id: I6fec37719719dfaf7077ce1f464605c93efa8ea2
Coverity-ID: 152054
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Using the K_* macros makes it easier to read what exactly the various
timeouts are.
Change-Id: Ia405d3760b8e600af7e33a7221ef6ec717708973
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Proceed to LCD programming only if device binding succeeds.
Otherwise, dereferencing a NULL pointer will happen. This
was caught by Coverity.
Coverity-CID: 151986
Change-Id: Ibdb658f530203428aa3e53f358e0788fc1502b06
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Stop the app from running if device binding fails. Otherwise,
dereferencing NULL pointer will happen. This was caught by
Coverity.
Coverity-CID: 151988
Change-Id: I8245d938498a51123249fbd069935900ad660314
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The memcmp is a comparison between two strings or buffers.
So, the length should be the buffer length, not the length
of the pointer to the buffer. This was caught by LLVM.
Jira: ZEP-1179
Change-Id: I7fd6b199686b19e7f4a2e1288897483e69ad091e
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This commit fixes a missing function return check reported by
Coverity.
Coverity-CID: 151949
Change-Id: Iedf090b7f2ded9f20ff6d796f1cd5c02990b0a4e
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151980
Change-Id: I44f13131d44c7c093781e1f11f8481e7ef8175c9
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Exiting from the test case when the gpio device is not found, this
to avoid a null pointer dereference
This issue was reported by Coverity
Coverity-CID: 151982
Change-Id: Ifaed47b2b48359dacfdb3111ca2895d5912779e6
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The data structure member being used is character array,
dereferencig this array gives **char instead of the expected
*char type.
This issue was reported by Coverity
Coverity-CID: 152030
Coverity-CID: 152033
Change-Id: Ied67e4b2d47017e6ad5e40b9b6fca1b496c483ed
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The sensor_channel_get return code is now evaluated.
Change-Id: Ib931d6caba65af7195bad53c62e6e5a3033b49e8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove redundant platform filtering and only use SOC filtering
Change-Id: Ib823e076a874ce61a235eca63eebb7f19d2fdd30
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I084406601badc64c257cbdd82b9c8b7509549303
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The variable type mismatching was caught by LLVM.
Jira: ZEP-1179
Change-Id: I402c348af142342e37e93619c4da6e3a5bfd82da
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This sample was created intially when there were no other
samples in place to enable the CONFIG flags to build code
inside those flags. However, those CONFIG flags are now
guarded with corresponding "SUPPORTED" flags which are
enabled based in Kconfigs of socs based on their support
for that power feature. This app is for x86 and those
features will not get enabled for this configuration. If
it is still required, then we would need to fake such
support in Kconfig.board of qemu_x86. Removing it, because
those flags will get enabled by sample and test apps of
socs that support the power features, causing code inside
them to get built.
Change-Id: I647be9289a49d69880811abee499a4efd61bbc6a
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Cleaned up and removed some unnecessary code to avoid
distraction from main sample implementation. Updated some
logic based on new PM interface in soc area. Updated README
to indicate it supports x86 and ARC and updated sample
output of both architectures.
Change-Id: I1c9c8348dae403b7ca6fe17ab867e3fbef06ae60
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Switch left-over usage of TICKS_NONE and TICKS_UNLIMITED to the new
unified kernel counterparts K_NO_WAIT and K_FOREVER.
Change-Id: I2f2a16360e816f9f8791eb216deb3c70b8cc87df
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In addition to providing documentaton, we also modify the static_lib
example to use outputexports instead of the double-include
Makefile.toolchain trick. For this to work well we need to fix a tiny
bug in the dependency handling in Makefile.inc.
Change-Id: I6571bc681bc34155f37cff1eccc2ea12ed52ef07
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Sample to show the USB UART console output.
Jira : ZEP-775
Change-Id: I70220daf8e63a0847b10cc094665ef6a4bc38907
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
convert all sensor drivers to use threads and the unified kernel API and
remove all legacy APIs.
Change-Id: Ica43ea74ecbbf85273f718f182c413a9dcd8abc6
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The API to disable _sys_soc_resume notification is currently
called _sys_soc_disable_wake_event_notification. This is
misleading because it is possible that the ISR from which
_sys_soc_resume is called could be from a different interrupt
with higher priority that happened before interrupts were
enabled. More accurately, it is a notification of exit from
kernel idling after pm operations.
Jira: ZEP-1271
Change-Id: I83747f2cacac1bc17f135d12f4aa4478970fc02d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Switch from fiber_start() to k_thread_spawn(). Also switch to
k_yield() from fiber_yield() in the same go.
Change-Id: I2dc480310f981112063651b61b0ceedf38601bee
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Use defines from k_fifo intead of legacy API.
Change-Id: Ib8cf0d88240ef145da550b8cf83d2580e7140521
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Only net_receive() is using non-special value for net_buf_get_timeout
so this change is included here. Other users are using special values
which are already correctly handling ticks vs ms change.
Change-Id: Ib12d34ac5a546b36fa7b35615f082c82a256bd07
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Use new sleep API or remove sleeps where not needed.
Change-Id: I88c0973e57eb4970b68b3f4fa428683191b1a7f0
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
This fixes warnings related to the use of nano_delayed_work.
Change-Id: Ie20fb47fc6d5c486ff885ad583354eb715d12c1b
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Currently the ideal buffer counts for a controller-only build are 6 RX
buffers and 7 TX buffers: ATT_MTU of 158 bytes can be sent in one
connection interval of 6 tx/rx -es wherein connection interval is
7.5ms
Change-Id: I64b4620c5e8e7db8d7ed72fa1db82e266e121f27
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove redundant semicolon from the end of a while loop.
Change-Id: I02cef7879efe0d6eeae59595e14fb1d9b00a6d52
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
If support for the controller assert handler isn't enabled the
function shouldn't exist.
Change-Id: I72076eb1001980f102a0404c91d22e41582ced25
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Don't use a controller define if controller support is not enabled.
Change-Id: I837b3b66f010dfbdf2d9099acd85fa29fce954b7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Restructure the Bluetooth options more logically.
- Both host and controller are now behind the same high level
CONFIG_BLUETOOTH.
- Selecting controller support disables other HCI driver selection, so
the controller isn't in the same list as HCI drivers any more.
- Under the top-level there's a "Custom stack" option, which when
enabled opens up the option of choosing CONFIG_NBLE.
There are various other cleanups and simplifications in this patch as
well, since splitting these up would have been fairly tricky while
making sure all test cases still build.
Change-Id: I5bb715cb9d20201cb8b72fbd149c8a09a4b2d7d2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When building Zephyr in the controller-only configuration,
assertions that happen in the Link Layer code are not visible
to the Host which is running on another HCI and connected via
UART or USB to it. This patch allows the Controller code
to output the assertion line number when in such a configuration,
allowing the Host to view the event to help debugging.
The event format used is temporary and will be replaced by a
standardized Vendor Specific specification to come at a later
time.
Change-Id: I013ca6783a3fdedc47b171132919dd4798c66285
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The BBC micro:bit doesn't have UART HW flow control, so it needs to be
disabled to build for the board. The baudrate is also lowered to
115200 since 1Mbps is likely to be unreliable without flow control.
Change-Id: I1725a2a1e46cfbc0f57b4f5c4ee57ff52d9670e9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add Low Power States support to the power shim layer
and show the usage in the quark_se sample.
States are defined as follow:
- SYS_POWER_STATE_CPU_LPS: SS2 with LPSS enabled
- SYS_POWER_STATE_CPU_LPS_1: SS2 with LPSS disabled
- SYS_POWER_STATE_CPU_LPS_2: SS1 with LPSS disabled
Jira: ZEP-994
Change-Id: Ie4b93f6e539cb53fc035be00280b66b2cb0d9fea
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
This reverts commit d4d9ac2d21.
This is broken:
core:static_lib(master): sanitycheck -T .
Generating LALR tables
Cleaning output directory /home/nashif/Work/zephyr/sanity-out
Selecting default platforms per test case
Building testcase defconfigs...
1 tests selected, 28 tests discarded due to filters
total complete: 1/ 1 failed: 0
1 of 1 tests passed with 0 warnings in 0 seconds
Traceback (most recent call last):
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1887, in <module>
main()
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1879, in main
ts.testcase_report(LAST_SANITY)
File "//home/nashif/Work/zephyr/scripts/sanitycheck", line 1551, in testcase_report
rowdict["ram_size"] = goal.metrics["ram_size"]
KeyError: 'ram_size'
core:static_lib(master): find -name *elf
core:static_lib(master): make pristine
make -C mylib clean
make[1]: Entering directory '/home/nashif/Work/zephyr/samples/static_lib/mylib'
Makefile:19: *** $(O) is not set. Try `make all-mylib` from hello_world. Stop.
make[1]: Leaving directory '/home/nashif/Work/zephyr/samples/static_lib/mylib'
Makefile:37: recipe for target 'pristine' failed
make: *** [pristine] Error 2
Change-Id: I61700b0df34790aef94a6700c7c7e0605343787f
Signed-off-by: axy <anas.nashif@intel.com>
In addition to providing documentaton, we also modify the static_lib
example to use outputexports instead of the double-include
Makefile.toolchain trick.
Change-Id: Iafe045ccc5dbbbd4063f836cc63057b4b06f7727
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Add a sample app to demonstrate the usage of Fujitsu SPI
FRAM.
It uses SPI 1 on quark spi controller and gpio 20 as CS.
Change-Id: I30c83bdd8312ca0cab7a62e397c0cb4ade0821cb
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The convention for Zephyr sample names is to use _ instead of - for
delimiting words.
Change-Id: I08a63e9f600deb38183f81ddb8f8bf407b6eec2e
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Sample to put the device in USB mass storage mode via
config options.
Change-Id: Icaf4839d8e8ac0526d1b723adc87607d6b4df9d7
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Making a reference to the common work queue code should not necessarily
drag in the system workqueue, since it is possible to use a workqueue
that is not the system workqueue. This is done by moving the system
workqueue into its own code module.
Moving the system workqueue to its own code module allows removing the
NANO_WORKQUEUE and SYSTEM_WORKQUEUE kconfig options, and compiling the
common workqueue code and system workqueue all the time. They are only
linked in the final image if a reference to them exist, same as the
other kernel modules.
Change-Id: I6f48d2542bda24f4702e7c2e317818dd082b3c11
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The README files provided with the samples contain references to NBLE,
which is not a publicly supported solution for Bluetooth. Simply
remove these files. If the need arises to provide application-specific
information in the future we can add back per-application README
files.
Jira: ZEP-1183
Change-Id: I81b3ea5491d50fb16062ccd5a421ddc8fcb7ea42
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Remove those from Makefiles and testcase.ini, we now support unified kernel
only and sanitycheck script now knows how to deal with this.
Change-Id: I853ebcadfa7b56a4de5737d95f2ba096babb2e13
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add kernel functions to kernel module and make it part
of the shell sample.
Change-Id: If5e8ff8ce7b8edbbb8d62509964700b007eaf88b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Port the sampe apps to use unified kernel and its apis.
Change-Id: Iee0a21df8008f27cfdbc9db50b66bd183d531f9c
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
QMSI 1.3 natively supports restoring the SoC and peripherals
after sleep.
The Zephyr Power Management shim layer is updated
in order to support QMSI functions.
The following functions have been added:
void _sys_soc_set_power_state(enum power_state);
void _sys_soc_power_state_post_ops(void);
In order to fully support deep sleep, the function
_sys_soc_set_power_state now support saving and
restoring CPU context and returns to the application.
_sys_soc_set_power_state function also abstracts
QMSI cpu states and enable the application to choose
between C1/C2 or C2LP states.
The QMSI power states are mapped as follows:
SYS_SOC_POWER_STATE_CPU_LPS -> power_cpu_c2lp
SYS_SOC_POWER_STATE_CPU_LPS_1 -> power_cpu_c2
SYS_SOC_POWER_STATE_CPU_LPS_2 -> power_cpu_c1
SYS_SOC_POWER_STATE_DEEP_SLEEP -> power_soc_deep_sleep
SYS_SOC_POWER_STATE_DEEP_SLEEP_1 -> power_soc_sleep
The following functions have been removed:
void _sys_soc_set_power_policy(uint32_t pm_policy);
int _sys_soc_get_power_policy(void);
FUNC_NORETURN void _sys_soc_put_deep_sleep(void);
void _sys_soc_put_low_power_state(void);
void _sys_soc_deep_sleep_post_ops(void);
Those changes are propagated to the samples.
All calls to QMSI are removed.
Jira: ZEP-1045, ZEP-993, ZEP-1047
Change-Id: I26822727985b63be0a310cc3590a3e71b8e72c8c
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
These testcases can't build on common platforms with 16K or less of
memory.
Change-Id: Iade2aa423f42a1f174a5ebb5d183b362917f503e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove this sample app. The component is no longer on the
board (quark_se_c1000_devboard).
Change-Id: I342616781e6f343cfc66b89cbdf85de5844f6f4a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for lcd hd44780 app.
Some delays were rounded up to multiples of millisecond, since
k_sleep only takes multiples of millisecond. Based on the lcd
datasheet, this should not cause any problem.
updated some comments based on what the code is actually doing.
Change-Id: I533c822dbaea0246dcd62a76cc23ce0d8edd4630
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Use unified kernel for the watchdog sample app.
Change-Id: I6b53f066033a451c3aafe7f3a528c7f3461ae305
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Ability to use Zephyr shell by multiple modules simultaneously, each
module for its own usage.
Old shell implementation enabled the user to call only one module
commands, not all of the modules simultaneously.
Change-Id: I0ef8fa2fd190b7490c44fe91d1016363258302c9
Signed-off-by: Yael Avramovich <yael.avramovich@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix minor style issues with excessive whitespace for alignment and
lack of 'static' for the tx_fiber_stack.
Change-Id: I0c761e94e6a6789a3772b08b0774cd1a5e73c2ef
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Right now the hci-uart samples doesn't really work anywhere else than
nRF5x, so make that the default configuration. Also rename the old
prj.conf to generic.conf to give a generic starting point for creating
configurations for other targets.
Change-Id: I1c940339b457d0e77c8ddad4b2474fc7e5b12a51
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In 3 of our UART driver implementations the ISR is exclusively
used and enabled for the RX path. The existing logic was
susceptible to a stall situation where a polled out transmission
would be interrupted by a reception and then the ISR code
would loop forever due to the TX event being signalled (although
the interrupt itself was disabled) causing the ISR to keep
looping for an RX interrupt.
Change-Id: Ic379e58b1c974aca3cee37d2d81f12c3726fb160
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
There's no need for this app to use the HCI driver API directly.
Change-Id: Ie5acfbfb09fc3f86c3f29f22fbf7da7db1ff2127
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
These options were only needed for a MyNewt-based nRF51 firmware on
these boards (the MyNewt BLE stack is called Nimble, hence the
prj_nimble.conf sample config files). With a Zephyr-based nRF51
firmware these options are no-longer needed, so it's not appropriate
to have them default to enabled. Instead, if they are needed, require
the app-specific configuration to enable them.
Change-Id: Iefbee4d97590af4e11bcedea05fe61f32a147b83
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
We are building for unified kernel by default. This avoids running the test
twice.
Change-Id: I2951464f448b3019c236ce5943df55c052b427d9
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make it run on Qemu only, this test is not intended for HW.
Change-Id: I842d7456f9238221ef5b661749136f4418d5ab16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
ztest was not working with unified kernel and v1 APIs and not many tests are
using ztest right now, so instead of making it work with old APIs, convert it
to unified kernel completely so that new tests written using ztest would be
unified kenrel based.
Change-Id: Ibfcc7783dcb266abbd388662ba61c4b55d32b10c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a new pwm app (rgb led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a rgb led is added. It will use the new API
pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: If8e5d8ab22dcf8b7cf3665e38949715c61ca9c03
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (motor control) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to drive a servo motor is added. It will use the new
API pwm_pin_set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Origin: Original
Change-Id: I65857848e64d0478c4e12d1317b2089cdd1ecf5c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a new pwm app (fade led) using the new API.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
To demonstrate the usage of the new PWM APIs, this app
to fade led is added. It will use the new API pwm_pin_
set_usec().
This app will be located in a new sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: I8d929a21f7de88307c47b52f98f131e00b2fdbe7
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Replace existing APIs which will be deprecated by
the new API in this app and rename the app.
Following the recent pwm RFC, all existing APIs will
be deprecated. Two new APIs will be added. The changes
for the new APIs and the required driver function have
been posted.
Since the two existing APIs (pwm_pin_set_period and
pwm_pin_set_values) used by this app will be deprecated,
this change is to replace them with the new API
pwm_pin_set_usec().
To demonstrate the usage of the new PWM APIs, more apps
will be added. All the apps will be located in their own
sub directories. The existing app is actually one to
blink LED. So, it is moved the "blink_led" sub directory.
Jira: ZEP-745 ZEP-1029
Change-Id: Icc3fbf6b6c25db9590c63bc08f40ec62c87c0f16
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Some minor cleanup and rename of c file to main.c
Change-Id: I8635c9c044f194c5527cd696e9065656403d10c4
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
It's important that this configuration stays within the limits of the
Arduino 101 nRF51 (which has only 16kB of RAM, unlike most others that
have 32kB).
Change-Id: I359061f8a41f1373f254c49bff00f551f915bd70
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
For the current purposes it's enough to build these tests only for the
ARM and x86 qemu targets. This also avoids false-positive failures on
platforms that don't have enough memory.
Change-Id: Icbbfc0603feba6bb1ec8a3054f8cdf0800f49ca1
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Since net_buf_get() for the avail_acl_tx FIFO is called in
interrupt context (ISR) it cannot wait, and it will fail
immediately returning NULL if it fails to acquire a buffer.
During LE Secure Connections pairing, when there is a fair
amount of packets coming from the host, the FIFO was running
out of buffers causing the packet to be dropped instead of
forwarding it to the controller.
The number allocated now matches the amount of TX buffers
in the controller, so that normal HCI flow control (from
the Host to the Controller) will kick-in preventing any
buffers from being dropped.
Change-Id: Ifad4fbac84ae938eb0e68b73a80a02ba79b6ff6e
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Adjust the dhcp_client sample Makefile to select a project
configuration based on BOARD rather than interface hardware. This is
more convenient for supporting other hardware than the current
organization and is consistent with various other samples.
Change-Id: I0f59b632144dfa875dc036ec6f4aa4f6657a79bc
Signed-off-by: Marcus Shawcroft <marcus.shawcroft@arm.com>
This makes all Bluetooth samples and tests being build with unified
kernel. main() is now executed from init thread and specifying task
for it in mdef file is no longer needed. By default main stack is
1024 bytes and this should be enough for BT samples.
Change-Id: I6674eea2c028b78ada5190acef72937186738af2
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Whenever the writer of a FIFO is an ISR and the reader a fiber it's
important to make sure that we give the chance for other fibers to run
in case the FIFO keeps getting new data from the ISR without ever
running empty.
Change-Id: I6b40461713d4acfdc6fcec13ff90c9697ff01935
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The bt_driver API was created when Zephyr only had a Bluetooth host
stack, but no controller-side functionality. The only "driver" that
was needed for the host was the HCI driver, and hence "HCI" was
omitted from the name.
With support both for host and controller Zephyr will be getting more
Bluetooth driver types, in particular radio drivers. To prepare for
this, move all HCI drivers to drivers/bluetooth/hci/ and rename the
bt_driver API bt_hci_driver.
Change-Id: I82829da80aa61f26c2bb2005380f1e88d069ac7d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_ARC_INIT defaults to 'n' now days so there's no reason to try
to explicitly disable it in the sample config files.
Change-Id: I88df06ba23bdac697f0767384f7b88e3bd9fced9
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add a config file for boards using the Nordic Semiconductor nRF5x
ICs with reasonable defaults in terms of UART configuration and
controller settings.
Change-Id: Iaa5904c96c0f40a2749b7dda0398dd35fa809f24
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Include zephyr.h instead which properly includes nano or unified kernel
headers.
Change-Id: I41c848092d022e2b0737ae6b2b53084eaf9bc6a7
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Due to the fact that ISRs run at priority 1, the LE_Rand
command was not being rescheduled after CPU sleep to be
able to fill its buffers. By performing all TX (to controller)
work on a fiber, the RNG ISR is able to run and the command
can be executed synchronously in the fiber context.
Change-Id: I3b658e1cab3f80ae655cc88566639a122a361a08
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add short descriptions for what the hci-usb and hci-uart applications.
Change-Id: Ie06cfa1678243e97b49e5594a00086cbf3c343be
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Lets not confuse user with this code, it is clearly not a sample.
Change-Id: I3a0209fb34b2c97383b0f5382f156b80470fdaf7
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Created unified kernel build setup for the power_mgr sample
app. Currently it shares the same source file between
micro and unified kernels. This is to help test and add new
features from unified kernel. In future, separate source will
be created for unified kernel. After transition is completed,
microkernel version will be removed.
Jira: ZEP-1140
Change-Id: Ic3a0b5cb3adc0749a7084ad785a041fee5875f56
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Also demonstrates use of k_thread_spawn() and K_SEM_DEFINE().
Change-Id: Id2f32ea38d2b5fea40f90a7ef6665231e4158cb3
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
- remove useless Kconfigs
- remove SPI DW kconfigs, we now use QMSI driver
- Cleanup readme and turn into ReST
Change-Id: Ie1f39e0afabf499fa81627ded59adf267e01993a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Enhance documentation and build for Quark D2000 Devboard by default.
Change-Id: I3417c31a8898a076465d25f45d7821820b480290
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The test is modified to key on CONFIG_TASK_MONITOR instead of
CONFIG_MICROKERNEL, since that is what it was really interested in.
Also, this allows the unified kernel to work w.r.t. task monitoring,
since that is a concept that is alien to the unified kernel, since there
are no more task transitions recorded as part of a kernel server. The
unified kernel does not have a CONFIG_TASK_MONITORING option.
To make this work, since the kernel_event_logger sample makes use of the
philosophers demo, the latter had to be modified as well. The nanokernel
philosophers demo would not work with the unifed kernel since it
identifies as a microkernel, and in that case the test would be looking
for symbols defined in an MDEF file, which the nanokernel demo does not
provide of course; the same thing applies to the nanokernel
kernel_event_logger sample. Instead, the demo defines NANO_APIS_ONLY=1,
which is really what it is interested in. To allow that definition to
exist, the nanokernel philosophers demo and both the nano/micro
kernel_event_logger samples add src/ directory with its own Makefile and
add their own phil_fiber.c and phil.h files, which simply include the
original files from the microkernel philosophers demo. As a final
change, the kernel_event_logger samples need a different prj.conf file
for the unified kernel, since it needs a bigger idle stack than the
default, since the kernel event logger does work in the idle thread when
the kernel goes to sleep.
Change-Id: I4cac45a32d09d6ca1de052a368b3219f64889869
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A bit of work has to be done by someone why wants to run the demo with a
different number of threads than the default.
Fixes ZEP-1077.
Change-Id: Ibb5cfed2bd9984bcf0f9d65f957f32daf4c5211e
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Microkernel and nanokernel tests now use customized source code
to eliminate use of MICROKERNEL and NANOKERNEL config options.
Change-Id: Ic3617df34487911af1607ab46f469c5e1212d3f7
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
This sample justs outputs the SPI FLASH IDs.
I think we should improve this to also output done, otherwise
it looks like its stuck or something.
Change-Id: I18d5919c1e25bb5aaa9ceba53793cc14b15f3c77
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Add a new sample application in sample/bluetooth/hci-uart
that acts as a bridge between a UART and the BLE Controller.
It receives commands and ACL data in H4 format over the UART
and passes them on to the BLE Controller to be processed.
It also conversely forwards all events and incoming ACL data
generated by the BLE Controller to the UART.
The application uses the hci_raw interface to pipe the data
to and from the BLE Controller and UART.
Change-Id: Iff7696166a82fe363b2ad4e1abea40103899f927
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This way the application can reuse the same callback for multiple CCC
since it can track what CCC is affect by checking the attribute pointer.
Change-Id: I608da643aea07de26b65d67e6db3268d717d0f53
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This will be reverted once input is supported in QEMU.
Change-Id: I4bc946f1634bf9ebd17b697f0da7ce2f813e5725
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
These platforms don't have the hardware and will always fail.
Change-Id: I637d39f003bd1d507da0b5bb6fa12118040fcd63
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Got out of sync with the revised signature of k_stack_init().
Change-Id: Ib4c67c75f30055583a457bfb13f8dacc9929ee88
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Old markup was using %(target)s, which is not the right markup to use,
so it was faiing to build.
Change-Id: Idbe99cfdd695284dc2a66e5823bc65a1417fbfd3
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Implement resources so they conform to what the ETSI plugtest suite
expects.
This allows the zoap-server sample to pass most of the tests of the
CORE[1] group, only TD_COAP_CORE_09 is not implemented.
Tests involving lossy networks weren't run as well.
The tests were run against the libcoap[2] client.
[1] ETSI CoAP test description
http://www.etsi.org/plugtests/CoAP/Document/CoAP_TestDescriptions_v015.pdf
[2] libcoap
https://libcoap.net/
Change-Id: Ifa3ed21a93052e02f47e99d7cb6d9d4b28e576d8
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
This sample uses the grove temperature and humidity sensor and displays the
read values on the grove LCD.
Change-Id: Id6fb6171c26c97f1b01008fa06a4dc85287d7545
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When the sample fails, it's difficult to identify whether it failed
during the configuration or transfer stage. Provide a little more
information which will allude to the nature of the failure.
Change-Id: I5272ce73f56b0e51c8439d5510e512b616665705
Signed-off-by: Lee Jones <lee.jones@linaro.org>
This removes ipss_listen since it does depend on the old network stack it
cause build problems with yaip and anyway its code is only used by ipsp
sample while the net samples does not use ipss_listen at all.
Change-Id: I23987670548741bde8800115d473a3bab242153b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This prepares the way for more controller-side HCI implementations
which can be named hci-<transport>.
Change-Id: I6f82db4b7b7096a122f32def9fe9025a7b811244
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
* Gets rid of k_current_priority_get(). Users can just call
k_thread_priority_get(k_current_get()) instead.
* Declares k_thread_priority_get() in kernel.h, where it
really belongs.
* Removes duplicate declaration of k_thread_priority_set().
Change-Id: I616ae6f2e06c95ecba3b92324186b3fa29162fd1
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Using AON for GPIO kconfigs is very specifc to quark se, there
is no need to make this special for this platform. Use the
existing scheme instead.
Change-Id: I946431490380dc0f537d6056277a94c9c9c80fed
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Simplified some documentation, removing inconsistencies and making
it easier to understand by separating PM infrastructure areas and
soc specific components that implement the hooks.
Removed the DEVICE_SUSPEND_ONLY policy as it is redundant and
causes high complexity in the flow. It is also not practical
to use it because it was meant to be used without doing CPU or SOC
low power state operations. This means it would do device PM
operations in the ISR of the system timer used by the scheduler.
This can disrupt the scheduler time.
Added a check of a flag around the notification sent from the ISR
of the wake event and created APIs to set/clear it. This will
allow disabling the notification when not needed from
_sys_soc_suspend().
Jira: ZEP-972
Change-Id: Id7aa7d2683384eabed518d4efac446ecc84c3498
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The path and port used by zoap-client were different than the ones used
by zoap-server.
Even if they are different applications, for consistency, it makes sense
for them both to be able to talk to each other.
Change-Id: I883d59c77bc3800b4f0965ba7bcf96a08e545d29
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
uIP keeps the port separated from the IP addresses, so if the
application wants to communicate with a remote endpoint we must also
have the port information available.
Change-Id: I8e2b01fe5717166e1f9cebcc74b2056325b8ccc3
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Origin: Original
Change-Id: I0927c25fbbba5d4863f199d058d311c10d52d784
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The demo can be configured to use different object types for its
synchronization: SEMAPHORES, MUTEXES, STACKS, FIFOS and LIFOS. To
configure a specific object, set the value of FORKS to one of these.
By default, the demo uses MUTEXES.
The demo can also be configured to work with static objects or dynamic
objects. The behaviour will change depending if STATIC_OBJS is set to 0
or 1.
By default, the demo uses dynamic objects.
The demo can be configured to work with threads of the same priority or
not. If using different priorities, two threads will be cooperative
threads, and the other four will be preemtible threads; if using one
priority, there will be six preemtible threads of priority 0. This is
changed via SAME_PRIO.
By default, the demo uses different priorities.
The number of threads is set via NUM_PHIL. The demo has only been tested
with six threads. In theory it should work with less than six threads,
but not with more without making changes to the forks[] array in the
phil_obj_abstract.h header file.
Change-Id: If7a0a34b216929a661245fd921a32ec413df8a4a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is a nanokernel sample and the MDEF file is not being used at
all.
Change-Id: I344adfa9394329258144de88521764974238f6a3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: I01c825c7eb44d6c321f2ffb88e8899da528921dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This board is not being used or tested and does not actually
run on any hardware, remove it in favor of well supported boards
for this CPU.
Jira: ZEP-850
Change-Id: Ied681b6059ad74f9d019054292c919a9f938e7d3
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Update the power sample and drivers with the new device driver power
management API using the existing logic
Jira: ZEP-954
Change-Id: Idd94232e458767635973e94e9fc673c01612c1e2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
This fixes the UUID 128 bits to use the right byte order so it can be
decoded properly:
< HCI Command: LE Set Advertising Data (0x08|0x0008) plen 32
Length: 21
Flags: 0x06
LE General Discoverable Mode
BR/EDR Not Supported
128-bit Service UUIDs (complete): 1 entry
Eddystone Configuration Service (a3c87500-8ed3-4bdf-8a39-a01bebede295)
Change-Id: Ia4aacaf3557d74a248f63cbffb2adb73b076d38c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Excluded Quark D2000 because there is not enough RAM to
build the sample.
Change-Id: Icc772e0aaca2be8731eae8f986eed17782beb445
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
In many cases there is no need to define a macro for printing to
the console, just use the correct variant directly.
Jira: ZEP-240
Change-Id: I9952deda4bfc60424f01fca2443d037562d13d0d
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
.ini format supports long lines by prefixing the continuation with an
empty line. Adding a backslash makes the backslash part of the value.
Change-Id: I0a1ade3a6bdf12281e61d06e21d7233d4b624b48
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Boards that cannot support microkernel applications for memory resources
are excluded from microkernel build test.
qemu nios2 board is excluded from nanokernel because the Altera JTAG
UART not implemented yet
The kernel even logger buffer size for nanokernel was reduced from 1000
elements to 500 to allow the sample to fit in the Quark D2000 board.
Jira: ZEP-698
Change-Id: I0c5cc4c0bfc27940a758dcdd8ff0e01ad7f4b88c
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
The sample applications for task profiling requires a default
project configuration file that can be used as reference for
any other board.
Quark SE dev board has some optional optimizations that can
be added using the prj_quark_se_devboard.conf file.
Some redundant symbols were removed to simplify the reading
of the configuration.
Jira: ZEP-698
Change-Id: I71d584d4454392e740f8b7a2c2f47206b76c3abf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
This patch adds the micro support for the shell application
Change-Id: I4499a8660323f1fa61ff3bbf6e7a3026a7dba77a
Signed-off-by: Yong Li <sdliyong@gmail.com>
This commit removes deprecated APIs and replaces them with routines
that provide similar functionality without the flexibility originally
offered by the deprecated APIs.
Removing deprecated routines will help us to be prepared once the
new IP stack is ready (ZEP-793). Furthermore, this commit will also
help us to move our current DNS Client implementation to the lib/iot
directory, as specified by ZEP-847.
This commit removes the netz library from the DNS client sample
application. UDP functionality is replaced by primitive routines.
Specifically, the following changes are applied by this patch:
- Remove netz routines
- Remove app_buf data structure
- Introduce primitive data types in the DNS client code
- Introduce primitive network routines
- Add a header file containing configurable parameters
Jira: ZEP-793
Jira: ZEP-847
Change-Id: I0302133da77308f0cdd9ace2c0265e6b77673ff0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This is only meant for Contiki based IP stack.
Change-Id: I53cbcb7da0bd13ad87243fd70974cec0bd31072e
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adding these tests allows to find issue with QMSI update.
Change-Id: Ib247bee6a5dbdd60aed759b4908e9ae7751d5f78
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Change tags to reflect the type of samples, in this case it is all
about sensors.
Change-Id: I9f87e8683dd52fd757cd07ba5aa9fad99d17ab38
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Remove this app, since the sensor is not on the
board any more.
Jira: ZEP-763
Change-Id: I931acfe9f01b817bc0b24a4e0745bf759e53da90
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Don't try to detect the UART device manually, the list is missing a
bunch of boards (the Quark SE sensor subsystem variant, and both
Arduino 101 halves). There's a config variable for that.
Change-Id: I903e52dcb6025e5da824faadb5e4bc59221fa210
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This output is going to a terminal device, not a Unix tty descriptor
which will cook the output for us. Newline moves the cursor down.
Carriage return moves it to the start of a line. We need both.
Change-Id: If93d1a85d16cea93b4788fa55e694a7b77055bfe
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
- Set default board to Quark SE Debvboard
Jira: ZEP-690, ZEP-760, ZEP-782
Change-Id: I7f7cc45b527a116f88cf45796e46b429ae6f0060
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
HID over GATT Profile Specification states:
'The HID Device shall use LE Security Mode 1 and either Security Level
2 or 3.'
Change-Id: I2cfc1d9df76b4e8a8b2be7e87d18a7a5f3a19ea8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a sample that implements HID Service peripheral, the current
descriptor map is for a generic mouse so when connecting to a Linux box
it will create a input device like in the following output:
input: Test HoG mouse as /devices/virtual/misc/uhid/0005:1D6B:0246.0035/input/input98
hid-generic 0005:1D6B:0246.0035: input,hidraw2: BLUETOOTH HID v5.29 Mouse [Test HoG mouse] on XX:XX:XX:XX:XX:XX
Change-Id: Iccf07926ecc7363f4f47e1aa9df506a722e7e2d3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HoG service sample which can be shared with application
samples.
Change-Id: I6893ff409b254d0a616b2ba558fd629ce9edf1d4
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a timeout to switch from configuration mode to beacon mode
following the recommended behavior from the spec:
The connectable timeout should be at the very least 30 seconds to let
enough time to user to start a configuration application.
Change-Id: I8f262c447ed1622e377fd7a05dde78c7b6b0560d
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Treat the sensor subsystem as an independent board that can send
messages to UART and disable IPM and the messaging interface. IPM
can be enabled by applications that require such interface.
Fix all samples that are affected by this change to make sanitycheck
pass.
Jira: ZEP-451
Change-Id: I3df6af16adefaefec02b97778d6c68ffc920ac35
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed tests that will fail when using ISSM toolchain because
there is no g++ inside.
Example:
export ZEPHYR_GCC_VARIANT=issm
export ISSM_INSTALLATION_PATH=<ISSM PATH>
sanitycheck -p arduino_101 -p arduino_101_sss -p quark_d2000_crb \
-p quark_se_devboard -p quark_se_sss_devboard
Change-Id: I532d4f0e0095472cbf3428cb8355167a320a10a0
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Casual building in the tree leads to regular messups where I forget to
clean up the outdir first when switching platforms and the build fails
in strange ways.
Put a $(BOARD) subdirectory under outdir, and use that at $(O) when
the user does not provide an output directory.
Note that "make pristine" continues to remove the entire outdir,
including other architecutres (so as to make the tree pristine).
Also update a few spots where outdir was mentioned in documentation to
clarify the new scheme.
Change-Id: I365eec06ea440f17380b9f9ace5f5d34b9bed4dc
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Change the api argument format following the API
argument definition change in the driver. Some
definitions of CONSTANTs were changed accordingly.
Correct some comment error.
Jira: ZEP-642
Change-Id: I1b34640aa70f1597076e035e2b3b576d8337129a
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
The KNOWN_ISSUES file describes issues and workarounds for the NATS
and DNS sample applications.
Change-Id: I9a33a82073707dbdd4109e0740108b99c42ad772
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Excluded Quark D2000, Nucleo F103RB, Olimexino STM32 for the
sample test_15_4. Boards doesn't have support for 15.4 neither
enough space.
JIRA: ZEP-738
Change-Id: I963509a77cdf6a8ff2efee2f2d4a498e3c07f9b5
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Kconfig allows selecting NETWORKING_WITH_15_4_TI_CC2520 even if the
current board doesn't support it, and also selects it by default. This
breaks building the 15.4 sample with qemu_x86. Add a config option for
having CC2520 support and enable the choise only if it is available.
In addition, remove unused function from iee802154 code, as it now
fails the tests.
Jira: ZEP-697
Change-Id: Ib082f82acdd0f86d3306bbd3bb827f61b0fd0be1
Signed-off-by: Jaakko Hannikainen <jaakko.hannikainen@intel.com>
According to last comments posted in ZEP-632, the unref routine must
be called only when net_send reports an error.
Jira: ZEP-632
Change-Id: I11553edf2c7d686c3e58617c2e05b6f18962955e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Incase of slip or ethenet use, if these is too much incoming data
current buffer count is not sufficient. Noticed with TCP client
and server example. So increasing it to avoid not enough Rx buffers
issue.
Change-Id: I6eef51c28c7c4751955aa4403122bf17d55ce12c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The app has updated the text it prints (which we were looking for) so
this was causing a false negative.
Change-Id: I3223a0dec8e44b0f89caf73626ffff82d74ab24d
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
README files are updated to include information about the
warnings displayed by the compiler.
Applications affected: DNS, NATS and MQTT.
Jira: ZEP-681
Change-Id: I482c3bbf37c5d9af3bb43b7ef5e58957bac2852a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
NET_TESTING_USE_RFC3849_ADDRESSES not defined as a Kconfig option.
Enable this in Makefile like this
ccflags-y +=-DNET_TESTING_USE_RFC3849_ADDRESSES=1 incase if you need
it.
Change-Id: I96b05d069cf5baa56cc27489b3c38b84412eec97
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The event logger nanokernel sample application spawns
application fibers and system fibers. This commit reduce
the application's fiber stacks to reduce the global
application RAM footprint and allow it to run on smaller
platforms like Quark D2000.
Jira: ZEP-526
Change-Id: I98f899892e5c5d8ce84f97f6768444cf67277a1a
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@intel.com>
Zephyr's MQTT does not implement a client's message queue.
So, a race-condition may be present when multiple messages are
received and processed.
We remove the pinreq function call to allow the mqtt_read function
to handle all the incoming messages.
CONFIG_IP_BUF_RX_SIZE is also updated to allow more messages to be
queued by the IP stack.
Jira: ZEP-669
Change-Id: Ie3ef55b17020e04c6540adf975a66fb004933914
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Use the goto statement to create a common exit point.
Remove redundant code when possible.
Change-Id: I2e22483c6fca4cb501b401164faf97d585ecec3c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The previous version of the pingreq handler function leaves
the semaphore blocked if an error condition is detected.
This patch solves the above described situation.
Change-Id: I4897609fae3f6523244892ae38ffdc5ae85f852d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The previous version of the DNS Client sample code assumes a
little-endian machine as a target. In this patch we use the byteorder.h
functions to handle the cpu to network order conversions.
Theoretically, this code must run on little and big endian machines.
Cosmetic changes are also applied to other files.
Change-Id: I2b47f6252fa070e0a0253666fde1785530d6aebf
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
README_API file is added in this patch.
Inline code documentation is improved. More test domains are added.
The README file is also updated to reflect these changes.
Change-Id: Ie670a6559611c6a8d216470e245dbea48369696f
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
MQTT unsubscribe message was not included previously. See ZEP-623.
So, this commit adds the handling functions for the MQTT UNSUBSCRIBE
message.
MQTT high-level API return codes are now unified to only return:
- 0 on success
- -EINVAL when invalid parameters are received
- -EIO on network error
API documentation is also updated to reflect the previous changes.
Jira: ZEP-623
Change-Id: I04d65c303762ce2ecaca73a4f222f0b77fe70503
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The UNSUBSCRIBE and UNSUBACK functions are added. These functions allow
to create the UNSUBSCRIBE message and to read the UNSUBACK message,
repectively.
Another function to create the PINGRESP message was also added.
Jira: ZEP-623
Change-Id: Ic055e5762051cc9fb5d59a19c6eb974e34014d7e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
README file now has a Troubleshooting section. It could be useful during
tests.
Change-Id: I925812b9bd62ac00a2f404939c1c0b7d9cf4dfd2
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch demonstrates how to use the MQTT UNSUBSCRIBE message.
The publisher application is updated to fix a typo.
Jira: ZEP-623
Change-Id: I2c302c9f9320687fc39f36726394417db89f06d8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The zero bytes hack to connect was deprecated by last
commits, so now we send 1 byte initialized to 0 :).
Jira: ZEP-612
Change-Id: I372964bbb102811d33509ad9386d9b360032a180
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The zero bytes hack to connect was deprecated by last
commits, so now we send 1 byte initialized to 0 :).
Jira: ZEP-612
Change-Id: Ie9e65fad3945d0babc4287e287be3aa57d68ed5a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch adds a README file describing the known-limitations of our
implementation.
Change-Id: I174db79783861f145ae224eca86f3fe4968e0205
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch standardizes the return codes:
- 0 on success
- -EIO on network error
- -EINVAL if an invalid parameter was passed as argument or
received from the server
API documentation is also updated to reflect those changes.
Change-Id: I076d195fde7c6b32b4a52454f312fb8cd8ce2332
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove generic PRINT macros from button samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Iae35d69a6a8473afdc1003ed629a21447a6f9a4a
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from aio samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: If50d8de2256f38902b5a4b68c57553cb5e8b8a94
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from pci samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I5a556637c441b1a4117eb75463d66f7127355a59
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from flash samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I2a9b69e9eb82bbdb03af563bdc49c7ed51681580
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from spi samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Ie377c7bba8b3cf2de05976cef5c4d814fa62b647
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from power samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I65a1caf2e3c2bd78f37d6443f180d674e9562af3
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from hello world samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I15224913179cdb4832f8185c4dfa85623ada6109
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from synchronization samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I1f0a9d66db136c41c29a75b3e02e414b822f881c
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from usb samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: Id90c657b05c3b3b9e326f3c1e08d8e8fb113714c
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from sensor samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I474efcd1daf8e621acd50d88b3a9662b8cd2b516
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Remove generic PRINT macros from net samples and replace
with SYS_LOG module.
Jira: ZEP-240
Change-Id: I4bec179c99056cce41e1f3495c162f25c3cd2364
Signed-off-by: Juan Manuel Cruz Alcaraz <juan.m.cruz.alcaraz@intel.com>
Fix several issues which are causing the BMI160 app hang.
For SPI duplex transfer, QMSI only supports equal length.
For SPI freq, divider is used. Actual freq is no longer used.
Jira: ZEP-461
Change-Id: I1a1bcc12c6514c3797686dfdad1ce1b852f7dc78
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add testcase.ini file for qemu_x86.
We detected an unexpected behavior in sanitycheck before submitting
this patch:
In testcase.ini, if platform_whitelist contains more than one
platform only the last platform will work. So, here we just use
qemu_x86.
However, we believe this situation is caused by the structure of
this sample. See mylib/Makefile.
Jira: ZEP-621
Change-Id: I656c1b9a69b93fd9f7b0d98a69f49b9641918a93
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Current code tests treats "" (quotes included) as an empty value for that
varible (as coming from Kconfig). However, that file also used to
integrate with build systems for 3rd-party components, e.g. as examplified
by samples/static_lib, and in that case it will be just an empty string.
So, first strip surrounding quotes, then test for empty string.
samples/static_lib: Update for recent Makefile.toolchain.zephyr changes.
Makefile.toolchain.zephyr is 2-pass now, so needs to be included twice.
ARCH needs to be defined *before* including it. Otherwise, just used
CROSS_COMPILE and TOOLCHAIN_CFLAGS set by it.
Change-Id: I56e963d0d107c77390395682d60400cf6ca62337
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add helper function for printing sensor_value to char buffer.
Change-Id: I46329675d9a69376ea74c4f7dfcb270ca2078c72
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add TCP/IPv4 routines to this sample.
This MQTT sample code demonstrates how to implement an MQTT subscriber
application.
To build this sample, the Paho's MQTT Packet Library is required. See
the README file.
For network application development, see:
* samples/net/echo_server
* samples/net/echo_client
Change-Id: Ibeb175ee2c4594b8961c60f2a0d25296c238401c
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Demonstrates the use of flash storage media for file system. This
uses the on-board SPI flash on Arduino 101 board.
Jira: ZEP-447
Change-Id: Ia571cff743f338d57922df68172e94c3f18a802d
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
Demonstrates the Zephyr file system APIs. This currently
runs on FAT FS using RAM emulation of disk.
Origin: Original
Jira: ZEP-285 ZEP-228 ZEP-481 ZEP-446
Change-Id: If459b8c2f819a2a38c8c4d805ec3f689dfcdef17
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
USB DFU sample application is now using new system log macros and
updated the .conf file.
JIRA: ZEP-311
Change-Id: Ifa5ede70c06a5fe18dde865fa7e97f469364ddb8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
ieee802154 driver is now using new system log macros, update the
Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: I640e973d880c3a222cd7c13a72d35edf49ada3a8
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
- Add TCP/IPv4 routines to this sample.
- Add a testcase.ini file.
This NATS sample code demonstrates how to implement a NATS subscriber
application.
Change-Id: I25a7465b7163a09a0163859076a97b1e258a06f1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
- Add TCP/IPv4 routines to this sample.
- Add a testcase.ini file.
This NATS sample code demonstrates how to implement a NATS publisher
application.
Change-Id: Ifeac3bf03b7febafcee927b1d2ec256685885fd8
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample code shows how to write a DNS client application.
Only client functionality is implemented in this sample.
The code is self-documented. Read the README file for more information
about the network setup.
See https://tools.ietf.org/html/rfc1035 for more information about the
DNS protocol.
Origin: Original
Jira: ZEP-500
Jira: ZEP-501
Change-Id: Ibcfa4e392143fdc2258971304d5296d70c1c9423
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add TCP/IPv4 routines to this sample.
This MQTT sample code demonstrates how to implement an MQTT publisher
application.
For network application development, see:
* samples/net/echo_server
* samples/net/echo_client
Change-Id: I13ac5ca1da2cd4d984fb595b599c3eab4edc5bf0
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
DesignWare USB driver is now using new system log macros, updated
the Kconfig variable to be a level rather than a bool and the .conf
files at samples.
JIRA: ZEP-311
Change-Id: Ief46cadd954ca4b30a3a1cf2eba6e44ccbc9bc9f
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
USB stack is now using new system log macros, updated the Kconfig
variable to be a level rather than a bool and the .conf files at
samples.
JIRA: ZEP-311
Change-Id: I873ee0f12b81a364307cdac27a2e058a43d4c9ea
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
DMA sample application is now using new system log macros and updated
the .conf file.
JIRA: ZEP-311
Change-Id: I11dbd5c58205297751696e483fc049c1c4b7654c
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
This is a client that uses shared keys to execute a TLS handshake and read
info from the server, information on how to run the test is in the README
file.
Jira: ZEP-327
Jira: ZEP-340
Jira: ZEP-495
Origin: https://tls.mbed.org/download/start/mbedtls-2.3.0-apache.tgz
Change-Id: I10f31f3635f346936807b7c8470b3d6ffb3af283
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
Debian and Ubuntu distributions come with an old version of the
mosquitto server that does not support MQTT 3.1.1.
So, the MQTT applications' README file is updated with this
information.
Change-Id: I1c76c757b5a15aa2bdd192bd912835a417cb0031
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample code demonstrates how to write a NATS subscriber
application. Code is self-documented and a README file is also
included.
This sample code uses the netz API.
The NATS protocol specification is available at:
http://nats.io/documentation/internals/nats-protocol/
Origin: Original
Jira: ZEP-415
Jira: ZEP-573
Jira: ZEP-597
Change-Id: I4b7e56bb6c2a934012b33039ea5b313b14f3b4c5
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample code demonstrates how to write a NATS publisher
application. Code is self-documented and a README file is also
included.
This sample code uses the netz API.
The NATS protocol specification is available at:
http://nats.io/documentation/internals/nats-protocol/
Origin: Original
Jira: ZEP-415
Jira: ZEP-573
Jira: ZEP-596
Change-Id: Ieb6e6e5f9bd48f34246b6d8c1bd9af3bbbe016bb
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample demostrates how to write a subscriber application that is
able to receive messages with different Quality of Service values.
The code is self-documented. Read the README file for more information
about the network setup.
This sample code uses the Network for Zephyr API (netz).
More details about MQTT can be found in the official documentation:
http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/mqtt-v3.1.1.html
Jira: ZEP-416
Jira: ZEP-568
Jira: ZEP-573
Jira: ZEP-594
Change-Id: Ia660313439c0c61c2210abbf8ce09ff278d11a1a
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This sample demostrates how to write a publisher application that is
able to send messages with different Quality of Service values.
The code is self-documented. Read the README file for more information
about the network setup.
This sample code uses the Network for Zephyr API (netz).
Old mqtt applications (paho_mqtt_client and paho_mqtt_shell) are now
deprecated.
More details about MQTT can be found in the official documentation:
http://docs.oasis-open.org/mqtt/mqtt/v3.1.1/mqtt-v3.1.1.html
Jira: ZEP-416
Jira: ZEP-568
Jira: ZEP-593
Jira: ZEP-573
Change-Id: I31f8a01e143e5d446f2fb4055c1cacb9d7174517
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch extends samples/power/quark_se application so it supports
'sleep' and 'deep sleep' power states.
According to spec, in these states, the core voltage rail is turned
off. In order to be able to continue the program execution from the
point it was before entering in Sleep states, we have to save the
execution context and restore it during system startup. The current
version of QMSI doesn't provide that feature so we implement it in
the sample application. In future, QMSI will provide this functionality
and we will remove it from application code.
Even though the _sys_soc_resume hook could be easily implemented in C,
it was implemented in assembly. During Zephyr initialization, _sys_soc_
resume hook is called before the C-runtime is initialized so implementing
this function in C doesn't look appropriate. It may pass the wrong idea
that we have the C-runtime properly initialized, which is not true.
Change-Id: Id60edeb3d33c490527b94ac0f435b7f91242dd81
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This reverts commit a3c0b2c00f.
The status of the 'netz' library is still under
consideration.
Change-Id: Ifde93465da306d86aec8a71d02a16653eb7cef9c
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The sample prj.conf file was using CONFIG_BMI160_DRV_NAME which doesn't
exist. Use CONFIG_BMI160_NAME instead.
Change-Id: I6eb29bf7772055a7b1fd62461fabe8e358dd10ec
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The prj.conf files set CONFIG_NS16550=n. The symbol should be
CONFIG_UART_NS16550. However, its not necessary to set this at all as
CONFIG_SERIAL=n will guard the UART driver symbol.
Change-Id: If7c40b649a94c869b13e009f67703b48e66e764f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add a sample app to read MAX44009 light sensor via i2c
of quark se sensor system.
Origin: Original
Change-Id: I7078b3383021cdc81ff7b59fd1958e6bf86fe988
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Add a sample app to show and test how the DMA memory
to memory transfer work.
Origin: Original
Change-Id: I0ff6790d9ba3e188cd2ad93d4c9a9c2405a84ac8
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Fix comment that had CONFIG_MICROKERNE should be CONFIG_MICROKERNEL
Change-Id: Ic7ad63350abe92e9f1b84f4de0d6d3bb1b43dc77
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This sample code demostrates how to use the netz API. A basic
IPv4/TCP/UDP client application is provided.
The README file describes the basic setup.
Origin: Original
Jira: ZEP-567
Change-Id: I1c7d2454336dc00747044c5fc330f9ab6457ecf1
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Code in samples does not follow an standarized format for reporting
success or operation failure -- thus we use markup (in file sample.tc)
to specify what shall be found in the console to consider execution a
success.
There is a few functional code modifications that add/extend console
messages so verification is possible or easier:
- hello_world, synchronization: extend the success message to also
print which core is running the testcase
- pci_enum: print message on success.
Change-Id: Idb6cea03adebe97d97854603f963f4e3d4cb856a
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
When running independent testcases that can run on any core, in
certain platforms using the Quark SE SOC, a stub is needed in the x86
to bring up the ARC core and pass along serial port messages. This
allows the indepent testcase to be ran in the ARC core without
modifications (the same way it runs on any other core).
There is a solution planned for the future that will allow this
workaround to be removed (without need to support backwards
compatibility).
Change-Id: I2a9b7e8797d03a5a2469d7b18a3025b79226f389
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Follow up to TSC decission for further discussion in the networking
WIG.
Change-Id: I148b484dfe308661573e47ed3e60cceed673bddf
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Added changes to enhance device suspend/resume involving
core devices used by OS and app. Updated with Deep Sleep
power policy usage example. Moved the arch/soc dependent
code to soc/arch dependent areas in Zephyr in a separate
patch. This app now uses api that abstracts the soc/arch
details in handling power states.
Jira: ZEP-511
Change-Id: I3b4eb0be973027dbf9bd046e16836f7863eee46e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
If the UART FIFO is already full at the start of the irq tests (e.g.
because the data from the previous polled mode test is still being
transmitted), then uart_fifo_fill() may not not be able to add the
requested character to the FIFO and so return zero.
Fix this issue by repeating retrying uart_fifo_fill() until success.
Change-Id: I055ca1d4c91d81488b89f2a9b00031b9f2b8b222
Signed-off-by: Jon Medhurst <tixy@linaro.org>
This patch adds a reference Power Management Application (PMA) for
Quark SE based platforms.
This application demostrates how to interact with the PM subsystem
and how to put the SoC in different power states. The application
"modus operandi" is very simple. The application keeps transiting
between all power states supported by Quark SE SoC. For now, C1,
C2 and C2LP CPU states are implemented. Upcoming patches will
add support for the remaining states (LPS and Sleep states).
Change-Id: Id81aadb8bf170fbb2ecfd9483ae250c786619e43
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
Signed-off-by: Iván Briano <ivan.briano@intel.com>
This print showing when the profiler is flusing data to the
UART is annoying, especially when shell is used
Change-Id: I62c4466bd7f599ff995027ee19aea539d6679ec0
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Both sys_tick_get_32() and sys_cycle_get_32() declared as return uint32_t,
so print them as such.
Change-Id: Iab12696f6cc466dc11fb41402e2e671e74e61a89
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This lets the callback take advantage of the powerful net_buf API for
parsing the advertising data content.
Change-Id: Id65e6e83efd60c0f36c47bc5446a2e8ec2833d7c
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This adds a sample which implement Eddystone Configuration Service
following the spefication bellow:
https://github.com/google/eddystone/tree/master/configuration-service
Change-Id: Ia3e74d068de03ae20191534e61b2752dd2d70211
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add short description of each sample app to the README.
Change-Id: I830e48aad226b5bf08985fbb6c218e3b5fe72b15
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
net_core.h is the ground brick of the IP stack, and thus should not
include other headers that might include net_core.h also: this would
create circular dependencies.
Change-Id: I70c17b736788528e4e0b4b5b2c478098b049c9b1
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Makes it possible to test things between qemu and host when
using slip.
Change-Id: I27e17de9f0d8c2c8406f0afdd66c295e827f87a0
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Use 192.0.2.0/24 address space specified in RFC 5737.
Change-Id: Iff2545f5b0f4817c99813c986d57801e166967a3
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Check if we have received IPv4 packet and call a handler
function to process it.
Change-Id: I9f9e5f0888d2c3b91401c98f4925647ddce09962
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This echo-server does not yet do anything useful.
Change-Id: I317051b3a2bfb0a80584ad385c2f308978a243cd
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Change CDC example to read and echo all the received data
before waiting for a new read interrupt.
Change-Id: I21e1646fb20a2c4f7aea2b396b633a4e0ae429fc
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Tags should be separated with spaces no with comma.
Change-Id: I5381200bcd0caf59f3601ec849d698966c734a28
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
This sample shows how to integrate a static libray into a Zephyr
application. A hello_world application and a small library are
included.
Origin: Original
Jira: ZEP-366
Change-Id: Idab38402b47042c3f9369b3a8e433d07d5fa4535
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
There was no need for arch-specific configs for this test
case. We now use the x86 config with CONFIG_TICKLESS_IDLE
removed.
The test case has been re-enabled on Nios II.
Change-Id: Idd206cb3ca55f2336685a416df18f5848dee09c3
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There is no reason to enable tickless idle or system power management
to test the kernel event logger, and it breaks systems which do not
implement tickless idle (like Nios II which lacks a powersave
instruction).
Sleep events are logged on all arches in nano_cpu_idle() or
nano_cpu_atomic_idle() so we get sleep events even without these
configs turned on.
Change-Id: I6db811478686d8b2cd9e12a65b118349e825b22f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
I see that the x86 version of the prj.conf file changed.
Merging those changes into the ARC one.
Change-Id: Ifd59d3b7ed71a4e6613bb3d164b901eb1ad7ad55
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Move LOW_BYTE and HIGH_BYTE macros from usb_common.h to
samples code.
Change-Id: I26296bde8c5b3991b3bfab71272c861b5360ce97
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Add support for alternate settings in order to access additional flash areas.
The DFU example uses the alternate settings as an offset into flash.
Change-Id: I636042c7f71a5d2a2778ec7dd5301a622720107d
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
CDC ACM sample class driver implements a virtual UART port.
SET_LINE_CODING, GET_LINE_CODING and SET_CONTROL_LINE_STATE
class requests are supported.
DFU class example does not perform an actual firmware upgrade,
instead it allows the user to upload a file at a predetermined flash
address or to download the content from that flash address.
Change-Id: I702e6727db15ef360d110a70a979c1e4bd4ee1bb
Signed-off-by: Adrian Bradianu <adrian.bradianu@windriver.com>
Signed-off-by: Jesus Sanchez-Palencia <jesus.sanchez-palencia@intel.com>
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Periodically reads temperature and prints it on console
Change-Id: I293a7aad88bce245d6c1149fd19fcb7c7e770e54
Signed-off-by: Mariusz Ryndzionek <mariusz.ryndzionek@firmwave.com>
$srctree for the application might not be set to be $ZEPHYR_BASE, use
$ZEPHYR_BASE instead to be more explicit in the build.
Change-Id: Iefa5ff59f246b584949329044f7a6531adc6ed62
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Updated tags to sensors in testcase.ini inside current_sensing sample.
Change-Id: Id2d5bfcbb1299ed6b1e386f774de46714669bf14
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
This adds flags parameter to write callback which can be used to indicate
that data only need to be prepared with use of BT_GATT_WRITE_FLAG_PREPARE
fixing qualification tests that needs to check authorization or other
errors that cannot be verified with just the permissions.
Change-Id: I3d662b2027718ffb52a280e3bbc9750be14f89ae
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
When profiler is started from shell, platform information is
transmitted over uart by calling uart_poll_out(uart_dev)
directly in the shell fiber context which is executed when
the command is entered ('prof start')
Problem is that 'uart_dev' global variable is set to the UART
console device when prof_flush() first call is done.
Depending on when this call happens (application dependent,
especially in nano-apps which have to call prof_flush in
their main loop), 'prof start' may happen before 'uart_dev'
variable is actually set, which drives to shell fiber crash.
This patches moves sending platform information from shell
fiber to prof_flush function to avoid using non initialized
'uart_dev' variable.
Change-Id: Ie64f4418a745affa3fbd731db6bf9bb998b7c2f9
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
ADC driver sample is now using system log.
Change-Id: I44f5189b3beb09a14d87842c5968127460eda710
Signed-off-by: Genaro Saucedo Tejada <genaro.saucedo.tejada@intel.com>
JIRA: ZEP-311
Setting CONFIG_ARC_INIT=n in prj.conf make it possible to use same
config for both QEMU and Arduino 101 targets.
Change-Id: Ie4f549d5721f2b87077fba8787f5b1e2a8f07680
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Add more specifications or qualify some to the sanity check test cases
for them to be ran in real hardware:
- kernel types (micro vs nano)
- platforms / arches to exclude / include
- one that is removed (for the PCI sample) as it cannot be ran
without extra information
Change-Id: Id14dc15eb89358c3656d2814ea41bb6fec051278
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
This removes the section explaining how to test the IPSP from the general
README moving it ipsp specific README which can be expanded to include
other specific details related to 6LoWPAN, etc.
Change-Id: I80210cacb6b0042b3b0dc570dbdf7d38f92b3031
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
ip_buf_appdatalen is not set while sending buffer.
Fixes: RTOS-1562
Change-Id: Id423ba5898b9b405d0ca027a74a06a19708841fe
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
It is no longer necessary to implement flush callback for long
descriptors since the stack can queue prepare writes this callback
will never be called which makes BT_GATT_LONG_DESCRIPTOR obsolete
as well.
Change-Id: Idca31ba8e4404d2acba760c420394d5adee0a508
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This is similar to previous patch which makes the API much more simple
when handling long writes.
Change-Id: Ibd3856863a43927195e23936872a160d5ff94648
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a buffer for incoming prepare writes which can be
tunned using BLUETOOTH_ATT_PREPARE_COUNT, these buffers are then used in
execute write to commit the data thus making flush callback obsolete:
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 50
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x16 len 34
[bt] [DBG] att_prepare_write_req: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] prep_write_cb: (0x001159c0)handle 0x0022 offset 45
[bt] [DBG] bt_att_recv: (0x001159c0)Received ATT code 0x18 len 2
[bt] [DBG] att_exec_write_req: (0x001159c0)flags 0x01
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 0
[bt] [DBG] write_cb: (0x001159c0)handle 0x0022 offset 45
Change-Id: Iae071d7b4b5b042285952da57e3f7a853cf58afb
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Update the prj.conf file, as the driver and Kconfig options for the BMP280
sensor were renamed to BME280 the following commit:
310ed1e sensor: add support for BME280
Change-Id: If3d81d90c269883aa51ff04a12f8fd1aa444a592
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add support for using the MyNewt Bluetooth firmware with the
environmental sensing sample.
Change-Id: I7e5050bc9d1f0edb0df007dd3db4f7e6abd60136
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This add CONFIG_BLUETOOTH_DEBUG_LOG which depends on SYS_LOG since the
later can actually use either CONFIG_PRINTK or CONFIG_STDOUT_CONSOLE.
Change-Id: Ib2974d1331f6c91d119a218ec95e8bf01069377b
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove erroneous initialization of 'data' via memset.
Set keep alive interval to 0.
Change-Id: I5da4649985efd39b37bbbdc6ae21a856f9e40b13
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Add a MQTT interactive shell that can connect, disconnect, subscribe,
publish, read published messages and ping to the MQTT gateway.
Origin: Original
Jira: ZEP-364
Change-Id: Ie85e7b8b9290cb8e80548886aea74a8427b2323b
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Set CONFIG_IP_BUF_RX_SIZE and CONFIG_IP_BUF_TX_SIZE to 4.
Modify mqtt_publish_read to retrieve topic name and message as strings.
Change printf for printk.
Change-Id: I6746846cb3359096d87dfbb3134d6a3a95bf087e
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This patch fixes long writes handling. Attribute length error and
invalid offset error for prepare write should be sent in a response
to execute write request.
Change-Id: I9b4cbe0df198df9d685dbd2b328009290ebdc567
Signed-off-by: Grzegorz Kolodziejczyk <grzegorz.kolodziejczyk@tieto.com>
The flag BT_LE_AD_NO_BREDR shall be set which makes BT_DATA_FLAGS
mandatory.
Change-Id: Id933a4d73bc9fdcdc53c197041bb488d45ba149a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Display text strings on parallel interfacing HD44780 based
generic LCD controller using GPIO pins to interface with
Arduino Due(SAM3). HD44780 is a popular controller and an
example can help using gpio pins in parallel with it. I
have tested it on JHD20x4 LCD panel for 4Bits & 8Bits
configuration. The code has been made generic so that user
can modify quite a few options.
Datasheets:
http://lcd-linux.sourceforge.net/pdfdocs/hd44780.pdf
Signed-off-by: Milind Deore <tomdeore@gmail.com>
Change-Id: If2809222466b462fa2f4c42b14a514828530f082
This sample shows how to integrate Paho's MQTT Packet Library to create
a MQTT publisher and subscriber application with Zephyr.
Change-Id: I1cb4124386752eef6187a56ccc9f6fd7fe7175a3
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Provide pcap support for echo-apps with PCAP=<filename> option.
For pcap support:
make server NET_IFACE=qemu PCAP=sample.pcap.
without pcap support:
make server NET_IFACE=qemu
Change-Id: Iad90064e0c32134f9c2fda7b28e2cbca1e4e931c
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
The echo-server should work just fine even if the multicast
context cannot be get. By default there are only two contexts
so the multicast would fail always anyway and the program
would not run properly.
Change-Id: Ia9737cbda4a933a208aae020f055f0b6062b4f47
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Microkernel on ARC works fine, was missing some declarations in the
linker file.
Also enable testing of microkernel with ARC and disable tests where
ARC is not supported yet.
Jira: ZEP-396
Change-Id: I2ac7b8dc0bea22f5d2e24832d9e3afad8df9f580
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
I2C_MSG_RESTART is not used in QMSI driver. What is really needed
here is I2C_MSG_STOP; Missing this flag is causing the issue.
JIRA: ZEP-398
Change-Id: I8fbfe15890c886ede4cce3d2cc68f53758a41e75
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
Demonstrated sequence of flash API calls to show write and erase
operations with the use of flash_write_protection_set API.
Jira: ZEP-383
Change-Id: I36e5b94519dbdf424dcfbcf7f38e5cf6437da7b8
Signed-off-by: Kuo-Lang Tseng <kuo-lang.tseng@intel.com>
On galileo, UART_0 IRQ is incorrectly mapped to IRQ 0
UART_0 IRQ should be mapped to IRQ 17 (same as UART_1 IRQ)
but NS16550 driver doesn't support mapping same IRQ for
different devices.
This is creating crashes when dumping profiler data on UART
CONSOLE (UART_1) with UART console enabled (UART in interrupt
mode)
This patch is disabling UART_0 in sample apps and adding a note
in the README file
This problem appeared due to following commit:
e643cede3a uart: add ISR callback mechanism for UART drivers
Since that commit, UART driver is setting the ISR for all
UART device instances when interrupt mode is enabled
Change-Id: Ic9d0207e5e5c7e3d8e8a8bf90f3132801bc6c2b1
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
On Quark SE, using system timer as event timestamp creates
inconsistencies since the timer is handled by software in
timer_int_handler and tickless_idle_exit. So timestamp does not
reflect timing of certain events like timer IRQ.
This patch introduces the usage of RTC or AON counter as kernel
event logger timestamp
Change-Id: I070254446dd98dd448e119892c34abf12efca719
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Many test configs are the same, remove complexity and duplication by
using just one kernel config where applicable.
This removes the usage of ARCH which is a remnant from the days where
we had to specify the architecture of the board, the architecture is now
part of Kconfig and determined basded on the board configuration.
This will also make it easy adding new architectures to test cases without
having to add an architecture specific config file when it is actually not
needed, for example now that we will enable micro-kernel support on ARC.
Jira: ZEP-238
Change-Id: I143fa3c4629c58329cfeb0c761c7a896fc1ef63a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This enable checking for errors and automatically print help string:
btshell> connect
connect <address: XX:XX:XX:XX:XX:XX> <address type: (public)>
Change-Id: Ie097ecddb72ab15bf6192e310d0bd839bfd251d5
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Remove the CONFIG_SENSOR_DEBUG as it is no longer needed since switching
to SYS_LOG_* in the sensor susbsystem.
Also, use __ASSERT where CONFIG_SENSOR_DEBUG was used to validate
function parameters.
Change-Id: I80ed7209abfb92220fa229d246c5b3a43b887e32
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
This removes optional write permission to the ES Trigger Setting
Descriptor. These setting can be set by application.
Change-Id: Ic62ebd909c10601955e67b38303b8c852971203e
Signed-off-by: Mariusz Skamra <mariusz.skamra@tieto.com>
This patches includes
- a profiler file/Makefile that can be added to an application to enable
kernel event logger flush over UART
- a nanokernel and a microkernel sample application permitting to
exercise the profiler
- scripts permitting to get kernel event profiler data over UART
console and post-process this data
Origin: Original
Change-Id: Icacf4354c526c7f780b11371e9c28c87e6461eb8
Signed-off-by: Fabrice Olivero <fabrice.olivero@intel.com>
Update the zperf app in order to support ipv6.
Change-Id: I137af07bbd739cf4bfe60bd13bdb06cf939c6c55
Signed-off-by: Sebastien Griffoul <sebastien.griffoul@intel.com>
This patch adds the TCP server capability
to zPerf tool.
Change-Id: I8e4d92b10079a7c4b4bddab8d78655031ca6125c
Signed-off-by: jgarcia <jeremie.garcia@intel.com>
* Rename BMP280 to BME280 which is a superset for the former.
* Autodetect device based on chip ID.
* Implement humidity fetching and reading for BME280
* Rename sample BMP280 to BME280
Change-Id: I565c769a7011e7496c9f1cad861d5ee311839b4f
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
By calling the microkernel entry point 'main' there's no need to have
extra hacks to share the same c-file with both nano and micro
configurations.
Change-Id: I6623855a87ef8624b2bddb75b95079521e0eab8b
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
The echo-client can now initiate a TCP connection.
Change-Id: I8223ef377127319dd1791497675a4abe8b382365
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If the active connection to another TCP host fails, then
quit as it is no point continuing.
Change-Id: I21317d7062d4ac93c342834a2503139fe27076e7
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-client application opens
a TCP socket and starts to send data to server. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side.
Change-Id: I35306b8ecd6794365086a23bf6a17f5103d7ac80
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Add two helper functions to simplify the use case.
Add comments to clarify the use of the networking API.
Change-Id: I60c58296b77d724b7094b90e153b50dfc0b58135
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Remove the symbolic link.
Update the Makefile.
Rename README as README.rst and restructure its content.
Change-Id: Ic74e91749fc0bbf728e528b49e99a87188f84e6d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
Using ARCH variable to select different configurations for the different
architectures is misleading and conflicts with the variable ARCH being used by
the build system. The variable is not needed, it is application specific and
an application can be built without the need to specify ARCH on the command
line.
This is yet another item specific to samples and test cases that
wrongfully being used and documented for every application. We need to use
another variable and just make it clear it is specific to samples and how they
are written. One possible solution is to have a script that gets the
architecture based on the board being used. Attachments
Jira: ZEP-238
Change-Id: Ieccbc087a41858fb96fb361c0aaa04705e968a4e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use the same Kconfig infrastructure and options for all SPI drivers.
Jira: ZEP-294
Change-Id: I7097bf3d2e1040fcec166761a9342bff707de4dd
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This is no longer needed since commit:
7834061d12
Change-Id: If6436204b886d31be20c27e4f3d74a5c5a979e8c
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes sure LE SC are always enabled regardles of controller used.
Change-Id: I015213eb95f97793d1a1962a1cb392c652489568
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
It is useful to have the shell emit the zephyr version number.
Output looks like this:
Zephyr version 1.3.0
shell>
Change-Id: I2608272564a5d2fe39f263c420a897d845457a98
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
The old 'config_whitelist' directive in testcase.ini has been removed.
We use the new expr_parser module to parse a 'filter' directive which
is a boolean expression. This gives a great deal more flexibility
in how tests can be filtered.
To keep the tree bisectable, use of config_whitelist in testcase.ini
converted to the new expression language.
Change-Id: I0617319818c5559c0f0569d2fa73d09b681cac51
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
The application tests polling mode and trigger mode (both data ready and
anymotion triggers).
Origin: Original
Change-Id: Ic0f9400758aaf56ef95f0f3c68c872d1bfd51176
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Instead of requiring application to provide both advertising type
and address type used just require app to provide info if advertising
is connectable or not. Advertising type is set based on provided
SCAN_RSP and local privacy support.
When local privacy is enabled it is no longer possible to advertise
using identity address. If such feature is to be required later on
advertising options can be extended.
This gives BT stack full control over what type of address is used
for advertising and is a preparation for random address rotation
and OOB support.
Change-Id: I90e9a683ef3794f155707343c874f75585439325
Signed-off-by: Szymon Janc <ext.szymon.janc@tieto.com>
Callback errors should contain ATT error code not posix errors.
Change-Id: I698fac086ab8b2dca3487ab99ee974b4318d16f7
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This also enables GPIO on ATMEL SAM3 when GPIO is set.
Change-Id: I4125af4910d57bed98b0ee4967fb696e3f345e67
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The driver and port used are already configured per port, no need
to hardcode the sample to a specific driver.
Change-Id: I8056e35db1e0970ec4ad56ce14fe5654fac9cf3e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This reverts commit 7eb9c884bc.
This change causes failures on arduino 101.
Change-Id: I6f8620b629516a6a81c2b417aa3736752ba40873
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
- CONFIG_GPIO_DW_0_BITS is not longer available
- Use default printk
- Do not enable debug
- remove useless whitelist in testcase.ini, we already whitelist
boards
Change-Id: If21795d544e268c26a757b697ce3c9f2e56db65f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
None of the configuration directives for any of the arches were
actually needed.
Change-Id: Id0bf7393b8e2c7e0f5188c50c13d7666cdfcd114
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fix typos and wrap text to 80 characters.
Change-Id: I25228c1d63ad391c734be601ed1503f42b4f2468
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Rename sensor_value_type enums from SENSOR_TYPE_* to more concludent
name SENSOR_VALUE_TYPE_*. This change is required if we want to
introduce SENSOR_TYPE_* (SENSOR_TYPE_ACCEL - if the sensor/driver
supports accelerometer, SENSOR_TYPE_MAGN - etc.) in the future.
Also it is more clear with this notation what these enums are referring
to.
Change-Id: Ic58e29288669e10c0695e0f86f59b0e57f7ac38c
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
Use string literal concatenation to break the sample text.
Change-Id: I0729b113e80d3efec909603fbb143d1bc515f165
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
This will allow this sample to run on systems with less than 8K SRAM.
Change-Id: Id3a1c826cfade09f91bc3b0dba3c98e386f5ab06
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Other IOs use this format, so lets be consistent and use
I2C_0 instead of I2C0 and I2C_1 an instead of I2C1.
Change-Id: I591ab08e14bd533ef0fac38e596559da783863b8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
gpio_set_callback is meant to be deprecated and thus modifying the
sample to use the new GPIO callback API.
Change-Id: I822cd1c81575834d40926c56cd61b87884230594
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Set the IPv4 address, netmask and default router addresses
that are used for automatic testing.
Change-Id: Iebddc42c56dceeb089af7878102f8a73c30f0b74
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The IPv4 address is set properly for testing purposes.
Change-Id: I996e7435276f65dbb642aa9ab99c37cd842d4b39
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
If TCP is activated, then the echo-server application starts
to listen TCP socket and reply data to caller. For TCP
connections, the application data is not reversed because
it would make it difficult to verify the data in the sender
side. The TCP packets might be split into smaller chunks by
echo-client so client would have some unnecessary difficult
to verify the data it sent if we reverse it.
Change-Id: Ic146dfc75825bc8057968c581bfe9d3285e0d7b4
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
User can enable TCP server (listening socket) support in the
IP stack. This commit does not yet have TCP client (connecting
socket) support.
Change-Id: I75dd02a81addc1d1e026463b53631d56378157df
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Adapting GPIO samples to use the new callback format.
Change-Id: I944dce4faeeee30117edbd7a065e40caa0b7ed66
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
To show possible usage of the device_busy_xxx() APIs.
Meant to show how drivers and power policy manager can use them.
Change-Id: I49d1dedd9a7b8d6bf09080c6c7243f0666330941
Signed-off-by: Jithu Joseph <jithu.joseph@intel.com>
Fix naming and use a global driver name for instance.
Change-Id: I30a54cb9c20773e1b6fdc57b934aa564612a6c45
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Use same string for driver name used for binding and fix
sample app to work with multiple drivers, not only DW driver.
Change-Id: I4d40aa9d4e83fcf16dc883bb74c3f0e3e30e3502
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also, lower the clock for the SPI bus in order not to hit the DW
controller CS issue.
Change-Id: I69c4211bfa6efb85117185e2ae813dd7c4915a7a
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
This app is needed for Arduino101 only, or boards using the Curie
module.
BMI160 interrupt pin is connected to AON GPIO controller. The driver
handling the AON GPIO controller runs on x86 core. Even though, the AON
GPIO controller is accesible to ARC core too, the current implementation
for Designware controller driver does not allow it. Hence, this app will
register a gpio callback and signal the ARC core through IPM.
Other boards that use a gpio pin on the regular GPIO controllers don't
need this app.
Origin: Original
Change-Id: I225ca60735e39c7a47693dc53237f48cd9ac2680
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
The movement is needed because on some boards, like Arduino101, the
current GPIO driver implementation does not allow for receiving
interrupts from AON GPIO controller directly on ARC core. Hence, IPM is
needed to relay the interrupts from x86 to arc.
However, other boards that can use a regular GPIO intterupt or users
that connect a BMI160 chip separately, can still use the ARC application
as is.
Change-Id: I58dd77edd45ea2b071db5b99073eb15722847bfe
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@intel.com>
Those samples are confusing test suites by not generating
the expected zephyr.bin binary.
Change-Id: I4fb81782bacafb4f259e088df4b2518faa6f47cf
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This prepares for adding other debug types besides the printf-style
logging to the console.
Change-Id: Ic2ed305192491734da991c4f61fdaace03fd60f2
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add config files to be used on Arduino 101 (or any Curie-based) board
with the MyNewt nimble stack running on the nRF51 and exposing HCI
over UART. These configs contain a stripped-down set of features so
that the resulting image fits e.g. on the Arduino 101.
Change-Id: I7300e9ca4205de6f52aa6ca1bfe4e0b011b6dcbe
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
zperf is a network traffic generator for Zephyr.
Same application is able to work dynamically in client or server mode.
It allows to assess network bandwidth.
zperf is compliant with iperf_2.0.5.
zperf can be run in micro or nano kernel.
Change-Id: Icbd69e1ad56ad29c678b098e7a2e07c44f90e48e
Signed-off-by: jgarcia <jeremie.garcia@intel.com>
Some sample applications are using file naming .config which are
inconsistent from others. Changed them to .conf.
Change-Id: I2ea3944f3809671d4c6f4782dbf77fe9c2a22864
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
It will not build without it. Generalize it then.
Change-Id: I334586f629de1f057e654a13a1c705cd559b44d8
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Demonstrate the use of SPI flash driver API on Arduino 101 board.
This is a re-submit of a previous merged patch which was reverted
because merge sequence was incorrect (the test app got merged
before the driver).
Origin: Original
Change-Id: I3fce61488ed7d48f400c12448f1c7a01c555661c
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
SDK version 0.7.5 has fixed ZEP-62. It is no longer necessary to use
-O0 in order to get correct readings from sensors.
Change-Id: Ia8ac2f55453b7dfdda71fe2f41863cbd0b366739
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
The ARC application collects temperature, humidity and pressure data from
a set of sensors connected to the Arduino 101 and sends it to the x86 core
through IPM. The collected data is also displayed on a Grove LCD.
The x86 application exposes the received sensor data as a simple Bluetooth
Environmental Sensing Service.
This version of the sample does not offer notifications when the sensor data
values change.
Change-Id: Iee456d5d2455c7ccb7c5923ef3c94ecb20b5cecb
Signed-off-by: Bogdan Davidoaia <bogdan.m.davidoaia@intel.com>
Add initial support for the Privacy Feature, including the ability to
manage a local IRK and to use Resolvable Random Addresses.
Change-Id: I1c70aea67078dd2a5d07f3b797c37746ebe9ab61
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
CONFIG_BLUETOOTH_DEBUG_DRIVER provides too low level information to be
useful for samples. Remove it from default settings.
Change-Id: I9d99f9953d4e6b839eeb51ed393e4aed1eeeb01b
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Exclude STM32F103RB based platforms from the test. The SRAM is overflown
by 14kB.
Change-Id: I37c2905ed2706a89d9a199bc49518937659ac997
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Take advantage of shell_init() accepting const commands array.
Change-Id: Ie8c023de62cda75f7057184555806401f0381a1a
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
This extends the pwm_dw sample app to build for
FRDM_K64F board also. Because of this, pwm_dw
has been renamed to pwm.
This allows us to put it through sanity test
to catch build breakage.
Change-Id: Ie4d7442af43ede58f4cec0ec28643384a685321a
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This adds the necessary tags to enable building the grove_lcd and
i2c_fujitsu_fram sample apps, so that the Atmel SAM3 I2C driver
will be built to test for build breakage.
Change-Id: I4adfb6336e82a6d407bbd5e9888c27d5f6bc5be1
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use SPI_0 by default or SPI_1 if configured differently.
Change-Id: I63f39f63a4b70fded3a7af8061058ba4779e573e
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There are two major issues with the kconfig:
() Some of the config options have incorrect dependencies inside help
under menuconfig. For example, CONFIG_GPIO depends on BOARD_GALILEO.
() Since the SoC and board specific kconfig files are parsed first,
the help screen would say, for example, CONFIG_SPI is defined at
arch/arm/soc/fsl_frdm_k64f/Kconfig. This is incorrect because
the actual config is defined in drivers/spi/Kconfig.
These cause great confusion to users of menuconfig/xconfig.
To fix these, the SoC and board defaults are now to be parsed last.
Note that the position swapping of defaults in this patch is due to
the fact the the default parsed last will be used.
And, spi_test is broken due to the fact that it requires
CONFIG_SPI_INTEL_PORT_1, but never enables it anywhere. This is
bypassed for now.
Origin: refactored and edited from existing files
Change-Id: I2a4b1ae5be4d27e68c960aa47d91ef350f2d500f
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This is a temperature and atmospheric pressure chip. The datasheet is
available at:
https://www.adafruit.com/datasheets/BST-BMP280-DS001-11.pdf
Change-Id: I3406eb6c2c4da564757b8315323d0681d648b541
Signed-off-by: Vlad Dogaru <vlad.dogaru@intel.com>
Added device power management hook infrastructure. Added
DEVICE_INIT_PM and SYS_INIT_PM macros that creates device
structures with the supplied device_ops structure containing
the hooks.
Added example support in gpio_dw driver. Updated the sample
app and tested using LPS and Device Suspend Only policies.
Change-Id: I2fe347f8d8fd1041d8318e02738990deb8c5d68e
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Also enable GPIO and add expected output to the README
Change-Id: I2117d53dc6f90394394c6a8dd9f308a01a110634
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Counter API and drivers were merged without fixing the new returning
error convention (errno.h codes). This patch fixes all occurrences of
DEV_* codes so -E* codes are used instead.
Change-Id: I85007e8565686b52121410badea547ed904460a0
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This adds a CTS service sample which can be shared with application
samples.
Change-Id: I38889f71f6ce8fc7b784d0d04af6c97408e2d662
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a BAS service sample which can be shared with application
samples.
Change-Id: I1f484dadf63b41632992454a40edd91077bb78fa
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a DIS service sample which can be shared with application
samples.
Change-Id: I66f7a725139c8fa381275c3bda5e7c79fa3f09c8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds a HRS service sample which can be shared with application
samples.
Change-Id: I1d2022ee7a6dfa46e2cae2d7c9d7924140d4fe37
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This reduces the amount of duplicated code across sample applications.
Change-Id: I20cf2e9f948f1420f234a58beb7f72ad74696cf8
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Move re-enabling logic to the NBLE stack.
Change-Id: I1b895aa952a241dc41e2fc9faa2794a8c2c2d2db
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Add generic sample that continuosly read magnetometer data from
the first device that finds available within a predefined list.
Change-Id: Ia9b5fd434f462fb4704896852415f90eb633e1eb
Signed-off-by: Murtaza Alexandru <alexandru.murtaza@intel.com>
This moves both the Bluetooth HCI and NBLE drivers under
"Bluetooth Drivers" category. This also adds a selection for
choosing Bluetooth stacks as the bulk of both HCI and NBLE stacks
cannot be compiled together.
Note that this does not move the source files. That should be
done in a separate change.
Change-Id: I32fa7097ada0fdc52bcc745adb78c7273f4023c6
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
An example of button driver.
Change-Id: I8af860058166d7ca5653f50ff585bc9784008f78
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Add a sample program for blinking with GPIO connected LEDs. The sample
program by assumes the use of Nucleo-64 F103RB development board as the
target and will need to be updated for other platforms. The intention is
that the code will serve as an example of how to use GPIOs in one's
code.
Change-Id: Ia190a7ad5b07181731c9f502d87bd0ef0ba1abde
Origin: Original
Signed-off-by: Maciej Borzecki <maciek.borzecki@gmail.com>
Test application to test quark Always-on counter and timer.
This app requires QMSI lib which is not in the repo yet.
See the instruction in readme.txt.
Origin: Original
Change-Id: If75b2714f9b609abc6f7b51c1c0d99d15152399f
Signed-off-by: Baohong Liu <baohong.liu@intel.com>
This patch replaces all occurences of the macro DEV_FAIL by -EIO
at the driver level. So this patch touch the files under drivers/,
include/ and samples/drivers/ when applicable.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I0594ab5dbe667e074c250129e7c13ce512ac940f
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch replaces all occurences of the macro DEV_OK by the actual
value 0 at the driver level. So this patch touch the files under
drivers/, include/ and samples/drivers/.
This patch is part of the effort to transition from DEV_* codes to
errno.h codes.
Change-Id: I69980ecb9755f2fb026de5668ae9c21a4ae62d1e
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This patch introduces the i2c_stts751 sample application which
illustrates how to use the I2C APIs from Zephyr. The slave device
is the STTS751 sensor which is present in Quark SE devboard. So
no wiring instructions are required in order to get this sample
working.
The application reads the temperature register from STTS751 sensor
and prints the temperature value. This sample is specific to Quark
SE Devboard, but it can be easily extended to support any other
board with the STTS751 sensor.
Change-Id: I9b56aa73645d4741942fc793f1450c6a1c7beb29
Signed-off-by: Andre Guedes <andre.guedes@intel.com>
This adds support for building and testing peripheral_esp using NBLE
driver.
Change-Id: I962238d526101f8f423491d3023079684ec7d59f
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Makefile.ipstack is more generic to net applications which
communicate through slip or between two qemus. So net apps
common folder is right place for it.
Change-Id: I57ca1eeaff28b853609daf92772361406131aa7e
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>
Add prj_qemu.conf files for dtls_server and dtls_client. Now
it can be tested between two qemus running 802.15.4 dummy driver.
Change-Id: Id94492f90539025854063662c2f0750a0b9ca845
Signed-off-by: Ravi kumar Veeramally <ravikumar.veeramally@linux.intel.com>