A detailed overview of Zephyr's build system. This is a
thorough view of the low level build process starting from CMake and
using Make as the build system tool. Things missing here that will be
further documented:
- west
- external modules/libraries
Signed-off-by: Flavio Ceolin <flavio.ceolin@intel.com>
STACK_CANARIES relies on random value for the canarie so
ENTROPY_GENERATOR or TEST_RANDOM_GENERATOR needs to be
selected to get sys_rand32_get included in the build.
Fixes: #20587
Signed-off-by: David Leach <david.leach@nxp.com>
Linux btusb driver do not relies on ZLP to determine the
end of a transfer. Instead the data is transmitted
continuously and the driver obtains the length of a event
from the HCI Event Packet header.
Fixes: #20250
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Fix the regression introduced as part of
commit 57d9411837 ("bluetooth: kconfig: disable some
options for openisa/RV32M1").
Also, prior to PR that introduced this regression, the Coded
PHY support selection was incorrectly depending on PHY update
support Kconfig BT_PHY_UPDATE. This was already fixed as part
the previous PR.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This command needs access to DT configuration, but can no longer
access it through BuildConfiguration since
9da1d41a12.
Import edtlib and use that instead.
Fix up some other error handling and output issues while we're here to
make the script's behavior easier to inspect and debug.
Fixes: #20545
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
We need this information in the cache now that we're not allowed to
parse generated_dts_board.conf from Python code after build time.
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
This commit fixes the settings_call_set_handler function
in a situation where the user calls settings_load_subtree_direct
with NULL as a subtree parameter.
Fixes: #20514
Signed-off-by: Radoslaw Koppel <radoslaw.koppel@nordicsemi.no>
Some architectures require more space on the stack when running samples
and tests. Use the CONFIG_TEST_EXTRA_STACKSIZE also on the philosophers
sample to deal with such cases.
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
The BT_HCI_TX_STACK_SIZE is carefully calculated from other
options. When those options change, e.g. from a menuconfig update, it
is important that the stack size is re-calculated, but it is not when
there is a prompt.
Therefore, make the prompt conditional such that the previously set
value is only used when it has been explicitly configured to be so.
Now users can still change the value through menuconfig and prj.conf,
by also enabling <option>_WITH_PROMPT, but when the value is
calculated by the defaults, it will continue to be calculated by
defaults instead of inheriting the intial value.
This is AFAIK a novel approach, but testing has shown that it gives
the users the behaviour they want, at the cost of some boilerplate of
course. This pattern can be applied to other options if it proves to
work as intended.
Alternatively one could remove the prompt, but then it would no longer
be possible to override the value through menuconfig.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When a MetaIRQ preempts a cooperative thread, that thread would be
added back to the generic run queue. When the MetaIRQ is done, the
highest priority thread will be selected to run, which may obviously
be a cooperative thread of a higher priority than the one that was
preempted.
But that's wrong, because the original thread was promised that it
would NOT be preempted until it reached a scheduling point on its own
(that's the whole point of a cooperative thread, of course).
We need to track the thread that got preempted (one per CPU) and
return to it instead of whatever else the scheduler might have found.
Fixes#20255
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
Add documentation for the possible HCI errors codes received for a
connected callback. The HCI error code received when the initiator is
canceled through the HCI create conn cancel operation is non-intuitive.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Fix for not served error code in fcb_offset_last_n()
implementation.
Issue was reported by static code analyze scan.
Looks like the function might have failed silently
if aggressive access to the fcb instance
from another thread have been occurring while the function
have been processing the fcb storage.
fixes#20512
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Add a simple block diagram detailing the SMP initialization flow. Not
pretty, but hopefully reasonable.
Signed-off-by: Andy Ross <andrew.j.ross@intel.com>
This commit modifies the struct array initialisation expression using
the "universal initialiser" to a struct single element initialisation
expression in order to prevent old GCC versions from erroneously
reporting the "missing braces around initializer" warning.
This is an infamous bug in old GCC versions; since there is no side
effect of using this alternate initialisation expression and it does
not violate the C99 standard, this problem should be addressed in the
code for the sake of portability.
Signed-off-by: Stephanos Ioannidis <root@stephanos.io>
Add support for boards that utilize the TI XDS110 like the CC3220SF,
CC3235SF, CC1352R1 and CC26x2R1 LaunchXL boards. The XDS110 can expose
multiple serial endpoints one for the uart device, but another for a
trace buffer. We assume that endpoint 0 will be the UART device.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Add setting runner type to jlink for 'J-Link' and openocd for
'STM32 STLink' when generating the hardware map.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Documentation about scheduling options was burried in the Kconfig help.
It has better visibility as part of the scheduling section of the main
kernel reference pages.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add a flag for identifing whether this object is on the trace
list. Ensure that link any object to the trace list only one time.
It will avoid the issue about lost object caused by adding a
object to trace list twice.
Fixes#19537
Signed-off-by: Shih-Wei Teng <swteng@andestech.com>
Get this commit in:
check_compliance.py: Run the dtlib/edtlib test suites on Python 3.5
Will work once
https://github.com/zephyrproject-rtos/zephyr/pull/20597 is in. CI
uses Python 3.5, so they have been skipped until now.
That PR is in now.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Commit 555936f771 ("dts/Kconfig: Remove unused HAS_DTS_SPI")
accidentally removed the wrong #endif, meaning the second part of
dts_fixup.h depended on DT_ADXL372_DEV_NAME not being defined.
Discovered through the reference to the undefined HAS_DTS_SPI symbol in
the comment after the #endif at the end of the file. Adding detection of
unused symbols in samples and tests to CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A reference to CONFIG_CAN_AUTO_BOFF_RECOVERY was added in commit
1b88658f9f ("samples: driver: Extend CAN sample"), but it's never been
defined as a Kconfig symbol.
Should have been CONFIG_CAN_AUTO_BUS_OFF_RECOVERY according to
alexanderwachter, so change it to that.
Adding detection of unused symbols in samples and tests to CI.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When Config client model send publish message, app_idx will
be need, however, currently code clear this value use `&`,
this will be generate error when app_idx not zero.
Signed-off-by: Lingao Meng <mengabc1086@gmail.com>
Corrected spellings in printk messages plus removed
unnecessary blank lines.
In case of Gen. Move client's message to Server, reduced
values of delta & transition time to improve demonstration.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
We need to fix the formato of the macros for nRF CACHE and NVMC
peripherals in soc.c, so the _S and _NS suffixes are skipped.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Since the nRF5340 DK contains the required DC/DC circuitry,
enable it by default while keeping it configurable. This
reduces power consumption in application core , network
core and high voltage use.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
This makes the misc-flasher runner usable by passing the build
directory to the underlying tool.
Fixes: #20658
Signed-off-by: Martí Bolívar <marti.bolivar@nordicsemi.no>
One shows how globals are routed for automatic memory
domains. The other illustrates control flow when making
system calls.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
The device address can only be 0x18 through 0x1F. C6 is connected to
the FXOS870 and is not exposed on a header: switch to Arduino D0.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
The i2c_msg API details do not work correctly with Nordic TWI. Switch
to the higher-level and simpler API for register read and write. Also
add a tree configuration on a Nordic-based board.
Signed-off-by: Peter Bigot <peter.bigot@nordicsemi.no>
There is possibility that endrx interrupt will be triggered in the
middle of timer interrupt responsible for UARTE timeout, this
patch handles this case.
Signed-off-by: Mieszko Mierunski <mieszko.mierunski@nordicsemi.no>
Commit 16d8ce519c introduced changes
that caused this sample to no longer behave according to documentation
and for some hardware to no longer work at all.
On nRF51 SoCs for instance, the reported number of cycles per second
is 16M, what makes the calculated max_period and min_period to be 16
and 0 microseconds, respectively, what effectively makes it impossible
for the sample to return to the initial blinking frequency. Moreover,
with such short PWM periods, the blinking is not even noticeable.
This patch partially reverts the changes mentioned above, and instead
of calculating max_period and min_period basing on the reported clock
rate, it tries to only decrease the max_period if needed, accordingly
to what the used hardware can handle.
Documentation is also updated to mention the possible change in
observed behavior of the sample on some hardware.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
LSM303AGR is a special one in terms of raw value scale among all devices
supported by lis2dh.c driver. Apply proper scale factor based on
sensitivity scale provided in LIS2DH and LSM303AGR datasheets.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Add new bindings for already supported (by lis2dh.c driver) lsm303agr
accelerometer. Using st,lsm303agr-accel compatible will allow in
subsequent commit to apply different sensitivity scale.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>