This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit should fix the concern about uninitialized memory of main
thread that was raised in https://gerrit.zephyrproject.org/r/#/c/12920/
The issue is more general, if it happens that the content of the
CPENABLE flag of any thread is set then any other thread using the CP
may cause a memory corruption.
I'd prefer to avoid the issue by initializing the CP descriptor to 0.
The descriptor itself is few words. We set them to 0 up to CP_ASA, which
is set to a real value.
As the dummy thread instantiated at the kernel startup does not use CP,
there is no CP area in its thread memory buffer. However it is mandatory
that it have the CP descriptor and that cpEnable in that descripot is
set to null. This is ensured by adding XT_CP_DESCR_SIZE to
_K_THREAD_NO_FLOAT_SIZEOF.
Change-Id: I6a36b5b363600ea1e6d98ab679981182b2b5a236
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Move linker/common-rom.ld between .rodata sections so that it's together
with other immutable data.
Move linker/common-ram.ld before the .bss section, so that .bss does not
appear between data sections, which had two consequences:
- there's a .bss-sized gap in the ELF image, and
- PHDR segment that covers .bss overlaps the segment that covers .data,
resulting in the following xt-run warning:
( [ sample_controller ] load_bfd ) *WARNING* Executable segment
[ 60004d60, 600079a7 ] overlaps an existing executable segment
Change-Id: I2db46f4656e240016fe60883057cc000b6377180
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
__stack is defined as a C language attribute for on-stack arrays. Don't
define it outside C source code.
This definition conflicts with __stack symbol defined in xtensa linker.ld
files.
Change-Id: I59fe34603bc2bb5732ed45c7974de5f8b25d77ed
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
This patch adds an actual dts target for builds. This required moving the
rules from Kbuild to Makefile and adding the correct dependencies to targets
requiring the dts files.
JIRA: ZEP-1979
Change-Id: I6ad568e2a821630911623cb227aa303fbf388515
Signed-off-by: Andy Gross <andy.gross@linaro.org>
This patch fixes the dependencies for the outputexports. The
.config has to be created for the outputexports to work properly.
JIRA: ZEP-1979
Change-Id: I9b4fab44c10545c57f7b613074c3ddebded0d423
Signed-off-by: Andy Gross <andy.gross@linaro.org>
If there are many connections there may be some delay before an ATT
PDU really gets transmitted over the air. Use the TX callback to
start the response timer so that it doesn't expire too soon.
Change-Id: Ibdd5bc1029ae4034caf329bf03892ac2093a0c67
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
In order to not overload the TX buffer pool and potentially run out of
them, enforce flow control for outgoing ATT packets so that the send
functions block until the PDU has actually been transmitted over the
air.
Change-Id: Ic065bb88aec8c2d0ac2def8ef62131a427f7051f
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This CONTAINER_OF() worked by chance, but was actually wrong, since it
makes it look like bt_l2cap_le_chan is the parent container of bt_att.
Instead bt_l2cap_le_chan is simply a member of bt_att, i.e. we can
dereference it directly.
Change-Id: I7307517bae823e54b45db31f75462655ce6eb50d
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
There is no command that should take more than a couple of seconds. If
it does there's something severely wrong with the system. Catch such
situations with a clear assert rather than silently blocking the
sending thread.
Change-Id: Ie981fddcc27059df3e4df586e86ceac2e348f509
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This sensor is supported already with many features, using it to test
SPI and I2C is an overkill. For both basic I2C and SPI samples we have
the FRAM samples supporting both IOs.
Change-Id: I794e584bd540d5fe6353fa3370aac0f1d6d105dc
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
According to the SMP specification the pairing is only to be
considered complete once the last SMP PDU has been transmitted over
the air. Take advantage of the new TX callback to notify completion
only once the packet has really been transmitted.
Change-Id: Ic87e598cd0e040d99f38344b98e476f67e4d9762
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
It's not valid for a peer to send another request before getting the
response to a previous one, or to send another indication without
getting the confirmation to a previous one. Take advantage of the
recently introduced TX callback to track when it's ok to accept these
ATT PDUs again.
The HCI USB transport has a potential issue here since a race
condition can occur between the ACL data and HCI event endpoints,
leading to dropping data when in fact both peers were behaving
correctly. To avoid hitting this issue, disable the flow enforcement
by default on the qemu targets that commonly use a USB-based
controller on the host OS.
Change-Id: I2791aaec6f6c0f8fd78a9a809a25e3ce129106c7
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Protocols/profiles may want to know when exactly their PDU has been
transmitted over the air. To make this possible, introduce support for
a callback that will get called when the controller reports that a
packet has been transmitted (through the Number of Completed Packets
HCI event).
Change-Id: Ia3a19b93c5b2111f144bfabe5861187c41525f30
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
When the ECC code was last time refactored hci_raw.c was forgotten
about. This fixes the issue so that ECC works again with hci_raw.
Change-Id: I1b1df66f1b2a311db611b9936ec074c88caf4143
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
This reduces the pressure on TX pool which may constantly block in case
of heavy traffic causing the RX thread to block as well.
Change-Id: Icfdde32031715e882085b7fa371191f157954156
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This adds net_buf_reset which can be used to reset the state of a buffer.
Change-Id: I4b7c89dfd1a23a2ec8dfa3c99d5b02b9bcbceef3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
This makes the code attempt to allocate from the original buffer pool
before relying on le_data_pool which shall only be used as last resort
as it is configure with minimal possible buffers (1 per connection).
Change-Id: I85b581627f5c3b1bf1ee7c5fa69099c5aca13d4a
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
TCP requires buffers to be acked thus it retain a reference, but L2
driver actually consumes the buffer so it needs a context pool to store
to original ones.
Change-Id: Ie9083ab361d3674c33080f9e7e6c7248aaf7abc3
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Added support in the Controller for increased feature set
bit fields in Bluetooth 5.0. Cached feature set in the
connection context is increased to a uint32_t value to
accommodate 17 feature bits.
Change-id: I9ae15d6d90fa7a3de186905d3c68088ee22d2911
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
With the introduction of event mask implementation in the
Controller, it is discovered that peer centrals
initiating LE connection parameter requests timed out as
the Host did not get/enable the HCI LE connection parameter
request event in the set LE event mask command.
Fix by adding the LE connection parameter request event bit
mask while creating set LE event mask command.
Jira: ZEP-2027
Change-id: Ida7750f375addc8a91036fffc47325518a3d2ec0
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
To avoid having to define a BIT64() macro in a public namespace, use
instead masks directly instead of bits, and also refactor the host code
so that it uses those instead of the earlier byte array with hardcoded
indices and masks.
Change-id: Ief03db616a96df65349d24289b62566a268ffdd0
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add definitions for Bluetooth 5.0 FeatureSet field's bit
mapping. Refer to Bluetooth Specification Version 5.0,
Vol.6, Part B, Section 4.6, Table 4.4.
Change-id: I5069421bf07a31ed9524fbdd02eb44079b1255cb
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Rename symbol names with channel/chnl to chan.
Change-id: I196ffea79e7e10b0253363949051fdf82be62cb4
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Because of the way we build we can't expect relative paths back into the
Zephyr code base to work properlly. This just happens to work on some
systems because of the various -I that exist and one hits the right
number of subdirs between it and where the "at.h" lives. Lets instead
add the Zephyr root as a include path and explicit do a relative path
from the root to get the header.
We end up with a build failure with newlib enabled on galileo because it
ends up not having an include path that gets us to the proper spot with
the various ../../.. ...
Change-Id: I48b4dc2dffb76314f380efbcbbe25957ff5e9e07
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Since the type of int, uint32_t, etc change with newlib we get the
following error:
subsys/bluetooth/host/at.c: In function ‘cme_handle’:
subsys/bluetooth/host/at.c:272:25: error: passing argument 2 of ‘at_get_number’ from incompatible pointer type [-Werror=incompatible-pointer-types]
if (!at_get_number(at, &val) && val <= CME_ERROR_NETWORK_NOT_ALLOWED) {
^
subsys/bluetooth/host/at.c:46:5: note: expected ‘uint32_t * {aka long unsigned int *}’ but argument is of type ‘int *’
int at_get_number(struct at_client *at, uint32_t *val)
^~~~~~~~~~~~~
We we can easily address by making val a uint32_t.
Change-Id: Ie6988368bd862afd4075baede7cb0a66c1628c18
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
If we use newlib the isdigit (and other similar functions) return an
error as char can possibly be viewed as signed:
usr/include/ctype.h:57:54: error: array subscript has type ‘char’ [-Werror=char-subscripts]
#define __ctype_lookup(__c) ((__ctype_ptr__+sizeof(""[__c]))[(int)(__c)])
Being explicit about the char being unsigned char deals with this.
Change-Id: I348189e1df11a1fcc58e5810b010b602fd2df33e
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
For consistency, "chan" and "param" are used wherever "channel" and
"parameters" are the words in the specification.
Change-Id: I778a8501ae6af991618c14cc6e395d765a9ae102
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add definitions for all LE commands and events added in the Bluetooth
5.0 specification.
Change-Id: Ia6d134a1ada67e98c803bb6a1708c3f4361c3bfb
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix doxygen comment typos used to generate API docs
Change-Id: I3efff6f5fa26f87d1e658d6336fef01ce45f5bb0
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I94df2e3a2bda248824ed2aeff3dd0eb743f0bf3e
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I248d53000d8e57b902b9a18fdcfc9e995142a8b3
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Fix doxygen comment typos used to generate API docs
Change-Id: I6fd5051c99bdcc731740c92001e525349c254d85
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
This reverts commit 7b9dc107a8.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: I1d9d797fee47ca266867ae65656c150f8fe2adb2
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit da8bff6b20.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: Ibb1fae7500bddb4772b8830d497a0e5f78b44bcc
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This reverts commit e60af3be66.
We revert this as we intent to move away from {u}int{8,16,32,64}_t types
to our own internal types for sized variables so we shouldn't need the
PRI macros anymore.
Change-Id: I4a57eb2c23cb1b137112224f604602d40c7cce4f
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Scanning for typos in comments and strings.
Change-Id: I3d4db89e0824959252c79c19baa50028354247bd
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
