As this is a test, it's minor issue, but let's keep Coverity report
clean.
Coverity-CID: 169303
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
No need to check attr and path variables for null as they
cannot be null.
Coverity-CID: 157595
Coverity-CID: 157602
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Source had CONFIG_ETH_MCUX_PHY_DETAILED_DEBUG, while Kconfig had
CONFIG_ETH_MCUX_PHY_EXTRA_DEBUG. Use the shorter name consistently.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Added implementation to auto-update LE Data Length to max.
Tx octets supported by the local and peer controllers.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to handle an incoming Reject Ext Ind PDU in
response to a sent Length Req PDU.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
When initiating Data Length Change at the same instant the
crossover condition was not handled correctly causing the
controller to assert.
This fix will allow crossover of Data Length Update
procedure, and this collison is harmless as per Bluetooth
specification, and gracefully handled by the controller.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Return error codes for HCI Tx buffer overflow conditions are
missing which would lead to silent dropping of Tx packets if
host implementations do not follow number of completed packets
or use correct buffer counts as returned by HCI Read Buffer
Size command.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Add beeps whenever the ball hits the walls or the paddle. Requires a
piezo buzzer connected to pin 0.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Add initial draft of a pong game using the display on the micro:bit
and its two buttons. This draft only supports a solo game where the
ball bounces from the "roof" and lets the player play against himself.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Allow the caller to delay the closing of the HTTP connection
for a number of milliseconds. The purpose for this is that
the client can send still some data back to us for a short
period of time.
This is needed for example for Basic authentication so that
server is able to receive authentication values back.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
Documentation doesn't specify if this function may return 0, so add an
inexpensive check to account for this.
Jira: ZEP-2135
CID: 160954
Signed-off-by: Leandro Pereira <leandro.pereira@intel.com>
These files are no longer used and can be removed.
Change-Id: I781256ab93b5364346d99cd4aac488762c437151
Signed-off-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
With the required patch already being upstream, we can now redirect
users to the standard vanilla DTC tree.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The 0.9.1 SDK is now required to cover all architectures and to enable
tests on all plartforms supported.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This image installs sphinx 1.5.5 which is the version currently
supported by Zephyr. Newer versions seem to have issues building our
documentation.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
EEPROM read mode is a specific mode where the controller will TX a
command to the slave, and once done, will read as many bytes requested.
The gain relies in the controller generating all necessary dummy bytes
by itself to read data the from slave, it will only generate RX
interrupts. Thus reducing CPU work.
Obviously TX and RX buffers should be relevantly provided by the user.
If not supported by the controller, the driver can still work (it will
have to generate the dummy bytes) and thus -EINVAL should not be
returned for that configuration bit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
If CS is controlled over GPIO, it will be possible to keep the slave up
and running (though no transaction will be going on) using this
configuration bit.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
SPI_HOLD_ON_CS can be used to ask the SPI device to keep CS on, after
the transaction. And this undefinitely, until another config is used.
This will inhibate the gpio cs delay, if any. This might be useful when
doing consecutive calls on one slave without releasing the CS.
SPI_LOCK_ON is to be used with caution as it will keep the SPI device
locked for the current config being used after each transaction. This
can be necessary if one needs to do consecutive calls on a slave without
any olher caller to interfere.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This gives a quicke example on how to use SPI asynchronous calls with
kernel's k_poll API.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All is done through the generic spi_context driver's API as it will be
generic to all SPI drivers.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Adding a struct k_poll_signal parameter to driver's API unique
exposed function.
If not NULL, the call will be handled as asynchronous and will
return right after the transaction has started, on the contrary
of current logic where is waits for the transaction to finish
(= synchronous).
In order to save stack, let's move the device pointer to struct
spi_config. So the call is still at a maximum of 4 parameters.
Adapting spi_dw.c and spi driver sample to the change so it still
builts.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
All SPI drivers have this same way to handle synchronous call, thus
let's generalize it in struct spi_context, with a relevant API and apply
the change into SPI DW driver.
spi_context API will prove to be useful once asynchronous call will be
handled as well, through the same completion functions used now only for
synchronous call. It will be transparent for the driver.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Let's improve common SPI driver context by adding a lock and generic
function to get/release it.
It's statically initialized to save a bit of ROM.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
This application intents to test an SPI driver by looping over MISO/MOSI
line where the controller will then send data to itself.
It will test various buffer tx/rx schemes.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Introducing as well a generic driver helper for CS gpio control and
buffer management.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such API improves many aspects of the former API by reducing the number
of function, allowing more buffer flexibility etc... This leads in
better memory usag and performance as well.
However, as this will take sometime to get into use, the former API is
still present and is the one enabled by default.
Jira: ZEP-852
Jira: ZEP-287
Jira: ZEP-1725
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
One liners if/for/while statements still need {}
(and line break are cheap for clarity).
Aligning parameters properly.
Also, removing __func__ usage from SYS_LOG_* as these macros already put
it internally.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Eliminate following errors:
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
make[2]: /home/nashif/Work/sdk/xtools/outdir/x-tools//bin/-gcc: Command
not found
Also, usage of CROSS_COMPILE with a predefined toolchain is not required and
complicates things, just call CROSS_COMPILE with the full path if you
want to build with a toolchain not supported with Zephyr.
Change-Id: I93ec4ff2e04d22cee82c8e4b74b652927572b30a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removed the old PWM APIs usage and added support for the new PWM API.
JIRA: ZEP-2018
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This change moves to a project specific container with the latest SDK
which adds support for xtensa HALs.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The data fragments were stored in reversed order when the RX
data was saved into network buffers. This was caused by net_pkt
changes in commit db11fcd "net/net_pkt: Fully separate struct
net_pkt from struct net_buf".
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
