clear RXNE flag in fifo_read, remove TEACK and REACK
check when uart_stm32_init because stm32f2 doesn't
has those flags.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
This adds the HAL code needed for the SoC for the stm32f2 series.
Origin: ST Microelectronics
License: BSD-3-Clause
URL: http://www.st.com/en/embedded-software/stm32cubef2.html
Commit: 1.7.0
Purpose: HAL layer for stm32f2
Maintained-by: External
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
The DMA API provides dma_slot field as a method to configure at
runtime which peripheral DMA_request the DMA controller should
select.
This method allows to specify different selections for different stm32
DMA streams. So, all the Kconfig definitions, which by the way where
fixing the same selection for all DMA streams, have been deleted.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
The Transfer Complete (TC) interrupt as well as the Memory
Increment (MINC) bits were not enabled for Periperal To
Memory (and Memory to Peripheral) case.
Signed-off-by: Armando Visconti <armando.visconti@st.com>
usb_dc_ep_write may be executed in an ISR context and should therefore
not take a semaphore with a timeout. The semaphore was initially
introduced to prevent USB buffer overwrite when writing to an endpoint
in a loop. This is not requested anymore since there is an existing USB
transfer API available.
Signed-off-by: Johannes Hutter <johannes@proglove.de>
DMA channel linked list items (LLIs) are allocated when the channel is
configured.
The LLIs should not be freed until the channel is de-configured
Hence, k_free of LLI memory is removed from stop handler.
Also, added code to disable the channel in stop handler.
Signed-off-by: Sathish Kuttan <sathish.k.kuttan@intel.com>
After PR #8608 every driver should call ethernet_init(), fixes missing
chunks of that PR.
Fixes: #8752
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
"Getting Started" does not clearly state how to use a custom cross
compiler. This patch adds a new section "Using Custom Cross
Compilers" to it.
To support users without SDK, we have the section "Building without
the Zephyr SDK". But the section is all about prebuilt tools in the
SDK but not build process. This patch adds two pointers "Using 3rd
Party Cross Compilers" and "Using Custom Cross Compilers" pointing to
the actual building process, and let those section describe
ZEPHYR_TOOLCHAIN_VARIANT, which is cross compilers dependent variable.
The patch also clarify what a 3rd party cross compiler is and what a
custom compiler is.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
The code did not check if the icmpv4 header struct is already
pointing to net_buf or not. This meant that the code did not
set the ICMPv4 options and types correctly.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The net_addr_pton() did not check the number of ":" characters properly.
For example with following net-shell input
net ping fe80::210:2030:9b:d48efe80::210:2030:9b:d48e
the kernel panics.
Signed-off-by: Walter Xie <41377148@qq.com>
Change #ifndef to #ifdef in the entries that enable the PWM driver
and particular hardware instances so that the enabling is done
properly.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
When the PWM_NRFX Kconfig option is enabled, add the nrfx driver
to the build automatically by selecting the NRFX_PWM option (it is
a hidden one, so the user cannot do it manually via menuconfig).
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Allow gPTP code to be run as a linux process and communicate
with gPTP daemon running in linux host.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
The return value from the k_mem_slab_alloc was not read. Hence
adding code to make use of this return value.
Fixes: GH-6681
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This commit adds a possibility to use Qav (credit-based shaping) in the
ethernet drivers.
There are two parameters exposed through the mgmt api: deltaBandwidth
and idleSlope.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
There is no point in sending Announces with GM chosen in BMCA if it is
expired and InfoIS is changed to MINE.
Check where does the GM info come from and fill the Announce packet
accordingly.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The problem is that net_if_call_timestamp_cb only checked if the
callback was registered for the PORT which invoked the whole action.
There is a possibility, that the callback will be registered, and packet
A will be passed to eth driver. Before the driver is finished with
packet A, network layer will start handling another packet (B) - so it
will unregister the callback for packet A and register it for B. After
that the network driver will finish processing packet A and invoke the
timestamp callback. The mechanism would then only check if a callback is
registered for the port of the driver and invoke the callback for the
packet that was registered earlier (so A instead of B).
This commit fixes that by storing info not only about the port but about
the packet too.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
Previously the newer one got dropped.
The older ones will be dropped in a way that the follow up messages for
them will not be sent.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The gptp port number starts from 1, so the check was incorrect.
Use the proper define values before printing stats.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The shell did not check if the gptp port (command argument) is numeric.
Add that check before executing the port info functions.
Signed-off-by: Tomasz Gorochowik <tgorochowik@antmicro.com>
The current test expects particular order of cap_webusb and cap_msosv2
structures, create alternative structure for comparison.
Fixes: #8732
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Removed redundancy from state binding & make it simplified.
Avoid partial state binding in case of state_binding() function
get called with invalid or IGNORE arguments.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Changes buffer length for all GET handlers as per patter of
< 2 + parameters length (in bytes) + 4 >
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This patched improved architecture of already implemented Vendor
Model. Now there are 4 separate opcodes for Vendor viz;
get, set, set_unack & status. This helps to setup
<command + response> mechanism.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Updated ztest_mock.c to support multiple calls to same mock function
within a single function under test. This allows sequencing mock
return values for improved decision coverage in a test, or simply
when a given function under test calls the same function more than
once with different parameters, or different return values.
Signed-off-by: Morten Priess <mtpr@oticon.com>
