Added k_thread_name_set() and enable thread name setting when declaring
static threads. This is enabled only when THREAD_MONITOR is used. System
threads get a name by default.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Fix misspellings in header file doxygen comments used to generate API
documentation, missed during regular reviews.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Enables instance 3 of the lpuart driver, adds dts fixups, and configures
pinmuxes to use bluetooth hci on the mimxrt1050_evk board. Updates board
documentation accordingly.
Tested with samples/bluetooth/peripheral_hr, with frdm_kw41z attached as
an arduino shield running the nxp hci controller application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Use the generated "_CLOCK_CONTROLLER" macro for the lpuart clock name.
This change is similar to commit
e81d9b98fe, but applied to nxp_imx.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The i2c drivers now consistently select HAS_DTS_I2C, so we no longer
need to select it at the board level.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Makes the designware and qmsi i2c drivers consistent with other i2c
drivers by selecting HAS_DTS_I2C in the driver.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Remove the inclusion of <string.h>, if CONFIG_INIT_STACKS
is defined, because it is not required anywhere in thread.c.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit improves the help text of INIT_STACKS
Kconfig option, so it indicates that the stack
initialization applies also to the interrupt stack.
Fixes#7196.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Add board support files for mimxrt1060_evk, the development board for
i.MXRT1062 (CM7) SoC.
- Add pinmux, dts, doc.
- External QSPI flash hasn't been configured yet. So code can be loaded
to SRAM for now.
- Tested samples: hello_world, philosophers, synchronization,
basic/blinky, and basic/button.
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Add mcux 2.4.0 drivers and device header files for mimxrt1061 and
mimxrt1060. Updates several drivers that were already imported for
other SoCs but also apply to mimxrt1061 and mimxrt1062.
Origins: NXP MCUxpresso SDK 2.4.0
URL: mcuxpresso.nxp.com
Maintained-by: External
Signed-off-by: Ryan QIAN <jianghao.qian@nxp.com>
Applications may require different scan windows and interval depending
on expected re-connection time or peer devices advertising parameters.
Default to GAP recommended slow values.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
The Kconfig option CONFIG_BUILD_TIMESTAMP became unused when
BUILD_VERSION was introduced, but it's option and parts of it's
implementation was not completely cleaned from the repository.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
With recent changes, sockets no longer depend on Newlib libc, so
let's have actual samples which demonstrate this. echo_client/
echo_server, which were ported from net_app samples, are converted.
The rest of socket samples are intended to be buildable on a
POSIX system (e.g. Linux), so they rather stay with more
full-fledged libc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The commit 1b80f00f56 made git describe
failure as fatal. But a failure can happens when no tag is in a
repository. And such a repository might exist for a internal build
system or some test environments.
Zephyr's build system is capable building without a commit hash.
This commit makes it non-fatal again and inform users that the build
system is failed to execute "git describe" but continues building with
KERNEL_VERSION_STRING.
Signed-off-by: Yasushi SHOJI <y-shoji@ispace-inc.com>
Added flag in log_output module to add timestamp when message is
formatted to a string. Updated existing backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Added flag in log_output module to add severity level when message is
formatted to a string. Updated existing backends.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
In order to avoid the build system complications that come from
including a timestamp, remove it by default from the version string in
HCI Vendor Extensions. Users can still include a unique identifier, be
it timestamp or not, using the CONFIG_BT_CTLR_HCI_VS_BUILD_INFO Kconfig
option.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
The following error appeared on documentation builds when enabling the
USES_TERMINAL flag:
USES_TERMINAL may not be specified without any COMMAND
This is because targets without a command should not be using the flag
at all, so remove its usage from those. Instead, use it in the
add_custom_command() that actualy invokes sphinx.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Fix 2 compile issues in RedHat/CentOS 7 for the native
ethernet driver due to a oldish glibc, which does not include
by default the needed structures.
+
Separate the native ethernet driver into its own library,
and set NO_POSIX_CHEATS for it, in case the Zephyr POSIX
library would eventually add support for any of the host functions
used in this driver.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
The Data Length Update implementation reused the flags used
by Encryption Procedure which caused invalid Encryption
Procedure sequence under conditions where Data Length Update
Procedure collide with Encryption Setup initiated by the
peer central device.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
pkt properties should be set prior to routing.
If packet routing is turned on and the packet is
forwarded to an interface, the pkt properties like
ipv6_ext_len or ip_hdr_len will not be initialized.
If a UDP packet is forwarded to an 6lo interface,
it leads to incorrect calculation of UDP header
during UDP header compression (net_udp_get_hdr).
Fixes#10204
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Adds a build system target for the west attach command, which starts a
debugging session without programming the flash.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The i2c_slave_api test was not getting executed on the nucleo_f091rc
board due to a missing supported features list.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The $(readlink -f) call in scripts/west doesn't work on macOS.
Let's just ensure compatibility on all the platforms by moving
scripts/west-launcher.py to scripts/west, making it executable on
macOS and Linux, and launching it from the Windows doskey macro.
Signed-off-by: Marti Bolivar <marti@foundries.io>
Cleanup unused leftover from shield development.
These flags are not actually useful, nor used as dts connectors
are sufficient to control board to shield binding is
operational and dtc provides meaningful error message
when this is not the case.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
This change aims at fixing 'unit_address_vs_reg' warning in
STM32 based boards.
This warning pops up when a node name is made up with an address
(node_name@xx) but does not contain a reg property.
This case was encountered for led nodes for instance,
where a reg property has no meaning.
Fix this by changing node_name@xx to node_name_xx which removes the
guilty '@xx' syntax but preserves node_name uniqueness.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
PR #10216 hit a doxygen/breathe known issue that is worked around by
adding an entry to the doxygen configuration to treat BUILD_ASSERT() as
a predefined macro.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Update to the latest west. This includes a new 'attach' command. There
are also multi-repo commands, but those won't get exposed to the user
unless they install Zephyr using "west init" + "west fetch" (and not,
say, "git clone").
Replace the launchers; they now detect whether zephyr is part of a
multi-repo installation, and run the west code in its own repository
if that is the case.
This also requires an update to:
- the flash/debug CMakeLists.txt, as the new west package is no longer
executable as a module and must have its main script run by the
interpreter instead.
- the documentation, to reflect a rename and with a hack to fix
the automodule directive in flash-debug.rst for now
Signed-off-by: Marti Bolivar <marti@foundries.io>
Unify method of enabling secure TLS sockets in samples by using TLS
overlay config file instead of standalone config files.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
Avoid having not-necessarily board specific configs in a separate file.
Instead, have a single project file with appropriate overlay configs.
Board specific configurations can be added in future if needed.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
The address of the device is also set via HCI interface when passive
scanning is used. As a result, LL does not filter out directed
advertising packets that are targeted at this device.
Signed-off-by: Kamil Piszczek <Kamil.Piszczek@nordicsemi.no>
This allows to configure desired parameters for peripheral. When set
PPCP characteristic is also added to GAP service. If disabled it is
up to application to controll connection parameters and stack will
only enforce 5 seconds delay before update.
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
This fixes a few issues with the handling of Connection Parameter
update in the Host:
- starting conn param update timer as master
- ignoring 5 seconds slave timer when calling bt_conn_le_param_update
- starting conn param update timer on every PHY update
Signed-off-by: Szymon Janc <szymon.janc@codecoup.pl>
1. All macros assert have been replaced with __ASSERT_NO_MSG.
2. Macro _Static_assert has been replaced with BUILD_ASSERT.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
Removing assert that was crashing shell in allowed scenario.
For example the Tab button is pressed when command buffer is empty.
Signed-off-by: Jakub Rzeszutko <jakub.rzeszutko@nordicsemi.no>
There is an unnamed choice for the BT link layer selection.
Giving the choice a name would allow multiple declarations of the
option and the ability to select out-of-tree LL's.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
Add ifdef guard to the z_reset_timeslice() to fix compilation
errors when CONFIG_TIMESLICING is disabled.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Remove the selection of MPU_REQUIRES_POWER_OF_TWO_ALIGNMENT
in SOC_MPS2_AN3385, as this is selected automatically by
ARM_MPU option (for ARMv7-M MCUs).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
After the recent change in `struct log_backend_api` (ie: add
of `init` function), init function can be marked as `static`
as it is only used in the scope of the file.
Signed-off-by: Olivier Martin <olivier.martin@proglove.de>
If this environment variable is missing, the user gets a rather
confusing cmake error message about "STREQUAL" "gccarmemb" from the
lines below.
Adding quotes to the check makes cmake handle it better and instead
report the problem in the later ASSERT.
Signed-off-by: Björn Stenberg <bjorn@haxx.se>
