Number of sectors is now calculated from the flash density
i.e. (Flash size)/(sector size).
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
The starting 192kB SRAM is reserved for the mcubootloader. Exclude
this region while building an application to be loaded by mcubootloader.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
FIFO_DEPTH should be in the SoC's Kconfig as this is a
configuration of SPI master controller in SoC.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This patchset introduces partitioning of flash in terms of blocks
(flash page layout) for s1000. This partitioning is currently to
be used for mcubootloader.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
This patch enables the support for FLASH_PAGE_LAYOUT and
FLASH_MAP for the generic spin nor flash driver.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Use DT_ instead of CONFIG_ for spi freq, spi bus name, flash device
name and flash base address.
Signed-off-by: Rajavardhan Gundi <rajavardhan.gundi@intel.com>
Update boards yaml file with arduino_i2c supported option
We exclude disco_l475_iot1 from the x_nucleo_iks01a1 sample since there
are duplicated sensors between the disco_l475_iot1 and shield. Until
Zephyr drivers can handle multiple sensors we need to have this exclude.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Enables instance 3 of the lpuart driver and configures pinmuxes to use
bluetooth hci on the mimxrt1060_evk board. Updates board documentation
accordingly.
Tested with samples/bluetooth/peripheral_hr, with frdm_kw41z attached as
an arduino shield running the nxp hci controller application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Enables instance 2 of the lpuart driver and configures pinmuxes to use
bluetooth hci on the mimxrt1020_evk board. Updates board documentation
accordingly.
Tested with samples/bluetooth/peripheral_hr, with frdm_kw41z attached as
an arduino shield running the nxp hci controller application.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Adds dts fixups for lpuart instance 2, which will be used for the
arduino_serial connection on the mimxrt1020_evk board.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
The mcux lpuart shim driver was updated in commit
20202902f2 to use DT_ prefix in all
defined labels not related to Kconfig, but instance 2 was missed.
Signed-off-by: Maureen Helm <maureen.helm@nxp.com>
Fix the value for Low Power Enable (LP_EN) bit mask.
(Issue described by Coverity CID #188734)
Signed-off-by: Armando Visconti <armando.visconti@st.com>
This board has headers for these buses so they should be made available
without requiring special overlays.
Also take advantage of the new Nordic auto-enable for peripherals,
which eliminates the need for special configuration.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Clean up a left over from GPIO driver factorization.
Definition of GPIO_REG_SIZE and GPIO_PORTS_BASE do not need anymore
to be spread accross SoCs.
Put these definitions directly in STM32 pinmux driver.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
If Server receives re-transmitted message then it will not
transmit corresponding publish message for it.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Added app_gpio.c & no_transition_work_handler.c to reduce
burden on main.c. It will simplify & help to understand
overall architecture.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Simplified algorithm behind states binding & target values calculation.
This has improved code readability.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This commit introduces compile definitions for nrfx, and
lets the build compile in system_nrf9160.c, when building
for nrf9160 SoCs.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
We want to run coverage on select platforms even if a few do support
that now. Specify which platforms should be enabled using the new option
--coverage-platform
By default we have the posix platform configured. Any additional
platforms can be specified using the option above.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
When coverage option is enabled, all C files will have
coverage option enabled. When we enable it for generated files
it adds extra .bss info and other related information.
Since the bss has now increased the perfect hash that was
calculated by gperf is now incorrect. Which is a problem
for userspace enabled systems.
This patch will make sure that the generated C files will be
compiled without the coverage flags. The remaining functionality
remains unchanged.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Disabled the CONFIG_COVERAGE for benchmarks and other tests.
This is needed because it interferes with normal behavior of the
test case.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Not all boards can get the coverage reports. The report generation
needs minimum of 64KB SRAM. This patch added support for mps2_an385,
qemu_cortex_m3, qemu_x86. This is just a subset. Also the previously
supported board native_posix is included in this patch.
If a board has 64KB RAM, it can generate reports by just
adding HAS_COVERAGE_SUPPORT in Kconfig.board.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This script will parse the serial console log file and create the
required gcda files.
Usage:
python3 ${ZEPHYR_BASE}/scripts/gen_gcov_files.py -i console_output.log
Add -v for verbose.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
These tests need to use stack size as a function of
CONFIG_TEST_EXTRA_STACKSIZE. These test will fail when
CONFIG_COVERAGE is enabled.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from x86 SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch adds all the required hooks needed in the kernel to
get the coverage reports from ARM SoCs.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This patch provides support for generating Code coverage reports.
The prj.conf needs to enable CONFIG_COVERAGE. Once enabled, the
code coverage data dump now comes via UART.
This data dump on the UART is triggered once the main
thread exits.
Next step is to save this data dump on file. Then run
scripts/gen_gcov_files.py with the serial console log as argument.
The last step would be be to run the gcovr. Use the following cmd
gcovr -r . --html -o gcov_report/coverage.html --html-details
Currently supported architectures are ARM and x86.
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
This is a custom Gcov implementation. Taking excerpts from gcc
gcc libgcc/libgcov.h and gcc/gcov-io.h.
Ported to zephyr by Ramakrishna Pallala <ramakrishna.pallala@intel.com>
and Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Signed-off-by: Adithya Baglody <adithya.nagaraj.baglody@intel.com>
Each time a successfully TCP connection is done, the number of dropped
TCP packets increases by 2. This is happens because when receiving an
initial SYN packet, or an ACK packet following a SYN+ACK packet,
NET_DROP is returned even if there is no error.
Fix that by replacing the two corresponding "return NET_DROP" by
"net_pkt_unref(pkt)" followed by "return 0".
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
mq_maxmsg and mq_msgsize are defined to be of
type long in POSIX standard. So use long for
variables that hold its value in mq_open().
Signed-off-by: Niranjhana N <niranjhana.n@intel.com>
Previously there was just "min_ram: 32", which took care about
suitable flash size implicitly. But now we have interesting boards
(e.g. lpcxpresso54114_m0) which tout RAM of 32K and Flash of 64K.
So, become more explicit about Flash requirement for the sample.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
This commit introduces a new Kconfig symbol to signify
that a CPU implements the Nordic-specific security
attribution unit. The symbol is meant to be selected
by Nordic SoCs that implement the System Protection
Unit (SPU) peripheral.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
This commit adds the nRF9160 fixup and the source files
for SOC and MPU boot configuration.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
