mps2_an385 is enabled for networking -> default networking is SLIP ->
SLIP selects UART_PIPE -> UART_PIPE requires UART_PIPE_ON_DEV defined
-> undefined leads to error on building some samples.
Fix all of these issues.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Add overlays for commonly used socket samples: big_http_download and
dumb_http_server. Can be used with:
make BOARD=mps2_an385 CONF_FILE="prj.conf overlay-smsc911x.conf"
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Board can be emulated in QEMU, so select QEMU_TARGET as required for
various bits of "make run" magic to work.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As emulated by QEMU. SMSC9118 is compatible with SMSC9220 as used in
ARM MPS2 board, as well as SMSC9115/6/7/etc. devices.
Portions of the code are based on mbedOS code from its
targets/TARGET_ARM_SSG/TARGET_CM3DS_MPS2/device/drivers/smsc9220_eth.c
eth_smsc9220_priv.h originally comes from Arm mbedOS file:
targets/TARGET_ARM_SSG/TARGET_CM3DS_MPS2/device/drivers/smsc9220_eth.h
augmented with struct & defines from:
targets/TARGET_ARM_SSG/TARGET_CM3DS_MPS2/device/CM3DS.h
and renamed as eth_smsc911x_priv.h to follow Zephyr conventions.
Then, following changes applied:
Changes to build under Zephyr, changes to use symbolic constants
and field access helpers, typo fixes, etc.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
The board has SMSC LAN9220 (actually as an "IP core" in an
FPGA-emulated SoC). The patch includes DTS bindings for this device.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
There is an effort underway to make most of the Zephyr build script's
reentrant. Meaning, the build scripts can be executed multiple times
during the same CMake invocation.
Reentrancy enables several use-cases, the motivating one is the
ability to build several Zephyr executables, or images, for instance a
bootloader and an application.
For build scripts to be reentrant they cannot be directly referencing
global variables, like target names, but must instead reference
variables, which can vary from entry to entry.
Therefore, in this patch, we replace global targets with variables.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The eswifi controller is capable of acting as an Access Point.
Implement ap_enable/ap_disable methods.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Create eswifi_at_cmd and eswifi_at_cmd_rsp helpers, allowing to send an
at command and parse the at response. These methods return success if
the response contains the OK* string. The eswifi_at_cmd_rsp method
extracts response content/size (DATA) on success.
*Response format is:
\r\n[DATA]\r\nOK\r\n>
Where DATA can be arbitrary (ASCII or not).
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Split out the boards that utilize the FRDM-KW41Z as a seperate test
where we explicitly set the shield as an extra_args instead of having to
do it in the CMakeLists.txt file.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Incoming updates to the nRF clock driver require some extra enum
definitions from the nRFx HAL which were not available in HW
model versions before 1.4 => update it.
Also as the nrf52_bsim does not yet support DTS, include a define
for the clock IRQ interrupt number (as the new clock driver will
be using the DTS macro instead of the nRF MDK value.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Add information about image size recommendations, and add some more
details about other reST features such as tables. Also added a flow
picture to the documentation generation doc.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Prolong by 1 second the BT encrypted connection test, to ensure
there is enough time for the link itself to be encrypted.
Before this change the key was exchanged, but the 1st notification
(pass condition) was received before the link itself was encrypted.
With this change we wait for 1 notification more (1 second more),
and during that extra second the link is actually encrypted.
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
board.h does not exist for any of the (official) Nordic nRF
boards. This commit corrects the information about the source
ofthe button and LED definitions.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove redundant inclusion of nrf.h (included by nrfx.h).
Group the logging/log.h inclusion together with the other
inclusions in this file (make inclusions' list look as in
nrf9160/soc.c).
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove the locally-defined macros which define the base
addresses for XICR, Peripheral space and PPB. The macros
are not used.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Remove all references in the documentation and Kconfig options
to the legacy shell to avoid confusing users and developers
Signed-off-by: Alberto Escolar Piedras <alpi@oticon.com>
Rather than specifying SHIELD via Kconfig, we move it to being
specified via the command line, similar to board.
So we can do:
-DSHIELD=x_nucleo_iks01a1
or, for multiple shields:
-DSHIELD="x_nucleo_iks01a1 frdm_kw41z"
Following cmake change, update x_nucleo_iks01a1 sample in order
not to enable CONFIG option anymore but set SHIELD cmake option.
Last, update documentation to reflect this change.
Signed-off-by: Erwan Gouriou <erwan.gouriou@linaro.org>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
printk is supposed to be very lean, but should at least not
print garbage values. Now when a 64-bit integral value is
passed in to be printed, 'ERR' will be reported if it doesn't
fit in 32-bits instead of truncating it.
The printk documentation was slightly out of date, this has been
updated.
Fixes: #7179
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Add a configuration structure to sht3xd that holds instance-specific
parameters, implemented in a immutable statically allocated object
initialized with material from device tree binding aliases.
Signed-off-by: Peter A. Bigot <pab@pabigot.com>
Fails sporadically on this platform and causing CI blockage.
Filed bug #12478. Should be reverted once bug is fixed.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
