Add flash and SRAM to the Microsemi MiV device tree.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Add bindings for SiFive Data Tightly-Integrated Memory.
Signed-off-by: Filip Kokosinski <fkokosinski@internships.antmicro.com>
Signed-off-by: Mateusz Holenko <mholenko@antmicro.com>
Synchronising the init procedure to initialise the mesh
state only after the settings have been loaded.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
After receiving Generic Level Move set/set_unack message, generic
level state should move towards positive or negative extreme end
(which is depend upon sign of delta value) till it not get interruped.
This commit has introduced this feature.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
If Node Lightness is in downward transition & received Generic
onoff message to set state equal to 1 then Node transaction get
stopped in between. Ideally it should reach to default lightness
value if it is non-zero. This commit has solved this bug.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
This commit upgrade the implementation to reduce complexity in
algorithm. Previously there was different timers for lightness
as well as temperature transitions. But at time only single
transition is remain activated & hence there is no need
of multiple timer for each entiity.
Signed-off-by: Vikrant More <vikrant8051@gmail.com>
Create a new dedicated section for west installation that details
some of the finer aspects of the process and steps involved.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Add a completion command that dumps the contents of a shell
completion file present in the zephyr repository.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This file was previously located in the west repository, under scripts/.
Since it now includes knowledge about specific behavior ef zephyr
extension commands, we move it here after overhauling it completely.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
sntp_simple() function queries the server (passed as "addr[:port]"
string). It wraps calls to a number of other functions, and may be
useful to write simple, concise apps needing the absolute time.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Two utils to manipulate addresses in format "addr[:port]". I.e.,
network address (domain name or numeric), optionally followed by
port number:
* net_addr_str_find_port(), to return pointer to port number
substring (or NULL if not present).
* net_getaddrinfo_addr_str(), which is effectively getaddrinfo()
wrapper taking a "addr[:port]" string as a parameter.
The header file is named socketutils.h to emphasize that these
utility functions are implemented on top of BSD Sockets API
(and other POSIX/ANSI C functions), and thus portable to other
POSIX systems (e.g., Linux), so can be used in apps testing
POSIX compatibility. More utility functions (beyond address
manipulation) can be added later.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Not in POSIX. Linux man getnameinfo says about it:
"In order to assist the programmer in choosing reasonable sizes for
the supplied buffers, <netdb.h> defines the constants
#define NI_MAXHOST 1025
#define NI_MAXSERV 32
Since glibc 2.8, these definitions are exposed only if suitable
feature test macros are defined, namely: _GNU_SOURCE, _DEFAULT_SOURCE
(since glibc 2.19), or (in glibc versions up to and including 2.19)
_BSD_SOURCE or _SVID_SOURCE."
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Bits are actually shifted by filter number instead of bank number.
This results in wrong mode and filter_index calculation.
Fix shifting of mode bits by using bank_number instead of filter_number.
Signed-off-by: Alexander Wachter <alexander.wachter@student.tugraz.at>
Calling functions like `net_if_start_dad`, `join_mcast_nodes` or
`net_if_start_rs` lead to L2 API function calls, which is not correct
for offloaded interfaces and leads to a crash. This is especially
problematic, as they are called in the default configuration.
Avoid calling these functions while an offloaded interface is brought up
by adding extra jump label.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
In case socket offloading is used, one might want to disable native IP
stack, both IPv4 and IPv6, to save memory. Currently it is not possible
due to preprocessor check. Prevent that by adding additional exception
for socket offloading.
Signed-off-by: Robert Lubos <robert.lubos@nordicsemi.no>
add usbd1 definition to rt dts file,
set EHCI controller config default value in rt1050 default config file,
add EHCI controller driver MACROs to dts_fixup.h,
initialize EHCI clock in rt soc.c
add HAS_MCUX_USB_EHCI for supported soc in Kconfig.soc
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
usb_dc_mcux_ehci driver is one shim of the NXP SDK ehci driver.
select NOCACHE_MEMORY if HAS_MCUX_CACHE
Signed-off-by: Mark Wang <yichang.wang@nxp.com>
Interface Association descriptor has to be used with Windows 7.
Add CONFIG_CDC_ACM_IAD option to force its usage, disabled by default.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Added .inf driver file for Windows.
CDC examples will now work on Windows.
Note:
This .inf is not signed and may cause problems during installation.
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
Unique PID is required for each sample in order
to be recognized by host.
When creating a new sample:
- Add USB_PID_<SAMPLE_NAME>_SAMPLE
in samples/subsys/usb/usb_pid.Kconfig
- Create Kconfig file in your sample's subdirectory, containing:
config USB_DEVICE_PID
default USB_PID_<SAMPLE_NAME>_SAMPLE
source "Kconfig.zephyr"
Signed-off-by: Marcin Szymczyk <Marcin.Szymczyk@nordicsemi.no>
This commit enables internal SoC DC-DC converter on efr32_slwstk6061a
board.
RF components on efr32_slwstk6061a board are connected to the internal
SoC DC-DC converter. Upon startup the DC-DC converter is configured in
the bypass mode. Such configuration provides enough power for the SoC to
boot and perform basic operation. It is not enough however to operate
the radio subsystem. Without this patch enabling radio in Rx or Tx mode
causes voltage drop and triggers brown out detector reset.
Signed-off-by: Piotr Mienkowski <piotr.mienkowski@gmail.com>
- Add examples for the latter.
- Point at each other and highlight how independent they are from each
other.
- State their inputs and outputs in plain English.
- Fix "git describe" error message giving the wrong impression that
everyone cares about BUILD_VERSION. Only the boot banner cares now.
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Hex firmware file is convenient in some scenarios, like
generating signed firmware with `west sign`. So, enable
generating hex file.
Signed-off-by: Jun Li <jun.r.li@intel.com>
In non-secure Trustzone application dedicated flash non-secure
partition are used instead of regular one, which become secure
partition in Trustzone collaboration model.
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
The two branches of the compile-time conditional are identical, so
they are consolidated and the conditional removed.
Just hygiene again. No functional change.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
This is just hygiene. Some preprocessor logic is optimized, eliminating
a temporary (_NON_OPTIMIZED_TICKS_PER_SEC) in the process.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Macros and enums are included for supporting pin configuration
settings.
Entries to the dts_fixup were also included in order
to configure port level settings.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Adds a new xec gpio driver that can be used with the
XEC MCUs. This driver modifies the PCR1 register in order
to configure gpio settings. Interrupts are triggered by the EC
interrupt aggregator block.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Dts Nodes for all the GPIO portswere defined. In addition,
a new binding file was created for the gpio driver.
Signed-off-by: Francisco Munoz <francisco.munoz.ruiz@intel.com>
Expose MEC1501 5 I2C/SMB controllers
Add Microchip specific I2C device tree properties
Signed-off-by: Jose Alberto Meza <jose.a.meza.arellano@intel.com>
Hook up SERCOM1 to I2C, it is connected to the EXT3 header and
the EDBG embedded debugging interface.
Signed-off-by: Benjamin Valentin <benpicco@googlemail.com>
The only use of the BOOTLOADER_UNKNOWN config option is on x86, where
it controls whether a multiboot header is embedded in the output.
This patch renames the option to be more descriptive, and makes it
an x86-specific option, rather than a Zephyr top-level option.
This also enables X86_MULTIBOOT by default, since the header only
occupies 12-16 bytes of memory and is (almost always) harmless.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Commit 11295c1 added Kconfig options for interrupt mode, but then hard
coded the interrupt mode. This commit uses the Kconfig option to set
the interrupt mode.
Applications expecting the interrupt mode to be something other than
the default will need to be updated.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The default case of the switch statement jumps over the unlocking of the
trigger mutex. This has been fixed with more granular locking which has
the added benefit of being more explicit about what is being protected.
Signed-off-by: Brett Witherspoon <spoonb@cdspooner.com>
The upper limit of the timeout should not be 0.
tests/drivers/watchdog/wdt_basic_api checks for this and fails as the
driver currently only checks that the timout does not exceed the upper
bound.
This also makes it check the lower bound, so that the test passes.
Signed-off-by: Benjamin Valentin <benjamin.valentin@ml-pa.com>
* KERNEL_ELF was easily confused with KERNEL_ELF_NAME and KERNEL_NAME.
* kernel_elf as the name of the binary indicates it somehow only
contains the kernel, which is not correct.
Rename to zephyr_final as this is the reality: Zephyr elf has been
linked again (a number of times) due to generated kernel files.
Signed-off-by: Mark Ruvald Pedersen <mped@oticon.com>
Fix an issue wherein local or remote initiated Connection
Parameter Request procedure would stall without generation
of LE Connection Update Complete HCI event because a local
or remote initiated PHY Update procedure has overwritten the
currently active Link Layer Control Procedure type.
Signed-off-by: Alexander Svensen <alsv@nordicsemi.no>
