Allow user to set the socket priority using setsockopt() call.
The priority value is used to order the networking queues so
that packets with a higher priority may be processed first.
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
We are not interested in whether the close() call succeeds or
not when the connection is terminated.
Coverity-CID: 198878
Fixes#16569
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
When CONFIG_X2APIC is enabled, twiddle the appropriate MSR during
initialization to enable x2APIC mode.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
More clearly differentiate MVIC vs. APIC timer code, and use new APIC
accessors in include/drivers/loapic.h. Remove extraneous comments, and
other light cleanup work.
This driver is in need of a serious overhaul -- despite appearing to
have support for TICKLESS_KERNEL and DEVICE_POWER_MANAGEMENT, bitrot
has taken its toll and the driver will not build with these enabled.
These should be removed or made to work... but not in this patch.
Old x2APIC-related accessors in kernel_arch_func.h are eliminated.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Use new x2APIC-aware accessor functions in loapic.h instead of
locally-defined ones. Remove bitrot #defines (no longer used)
and extraneous comments with information from old data sheets.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
MSRs related to x2APIC will never be accessed directly by name, but
rather via an offset from a base MSR, so the definitions are removed
from msr.h.
New local APIC accessor functions, which are sensitive to xAPIC vs
x2APIC mode (CONFIG_X2APIC), are added to include/drivers/loapic.h.
These accessors use the MSR definitions as modified above.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Simple renaming and Kconfig reorganization. Choice of local APIC
access method isn't specific to the Jailhouse hypervisor.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
The real-mode startup code is trivially changed to refer to MSR
definitions in include/arch/x86/msr.h, rather than its ad-hoc ones.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
Light reorganization. All MSR definitions and manipulation functions
are consolidated into one header. The names are changed to use an
X86_* prefix instead of IA32_* which is misleading/incorrect.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
drivers/interrupt_controller/i8259.c is not a driver; it exists
solely to disable the i8259s when the configuration calls for it.
The six-byte sequence to mask the controllers is moved to crt0.S
and the pseudo-driver is removed.
Signed-off-by: Charles E. Youse <charles.youse@intel.com>
It is possible that UDP header cannot be accessed so we need
to check that we do not do null pointer dereference.
Coverity-CID: 198866
Fixes#16581
Signed-off-by: Jukka Rissanen <jukka.rissanen@linux.intel.com>
This is the generic symbol to select or otherwise test for when 64-bit
compilation is desired. Two trivial usages of this symbol are also
included.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
This had numerous problems, but should now be working
end-to-end and produce correct reports with gcovr 4.1.
Use of sanitycheck is now much clearer.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This tool is cited in our documentation for producing coverage
reports, add it to the list of packages pulled in by pip during
workstation setup.
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Casting a pointer to an int produces warnings with 64-bit targets.
Furthermore, an int is not always the optimal memory element that
can be copied in that case.
Let's use uintptr_t to cast pointers to integers for alignment
determination purposes, and mem_word_t to denote the optimal memory
"word" that can be copied on the platform.
The mem_word_t definition is equivalent to uintptr_t by default.
However, some 32-bit targets such as ARM platforms with the LDRD/STRD
instructions could benefit from word_t being an uint64_t.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
Add support for reading the onboard potentiometer (ADC0 channel
12) and thermistor (ADC0 channels 0 and 1).
Signed-off-by: Henrik Brix Andersen <hebad@vestas.com>
We've never propertly generated any pinmux info, so remove generation
from the binding yaml files for pinmux properties.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
load_config() and write_config() now return a message to print. This
message also says whether the configuration was loaded (replace=True) or
merged (replace=False), and whether the new .config is different from
the old (for write_config()).
Print the returned messages and remove some old print()s.
Also switch to an improved warning control API (the old one is still
supported, but might as well).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
A recent Kconfiglib change turns
config A
bool
prompt "foo" if C && D
default A if B && C && D
depends on C && D
into
config A
bool "foo"
default A if B
depends on C && D
Where e.g. D might be from a surrounding menu/if.
Update the note at the end of symbol pages to clarify that only the
'depends on' includes propagated dependencies.
Piggyback some minor cleanup.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Update kconfiglib, menuconfig, and guiconfig to upstream revision
5c904f4549 to get various improvements and fixes in:
- Marc Herbert found an issue involving symlinks, absolute paths,
and rsource that could lead to files not being found. The root cause
was relpath() assuming that symlink/../bar is the same as bar/, which
isn't guaranteed.
Fix it by handling paths in a simpler, more textual way.
- Propagated dependencies from 'depends on' are now stripped from
properties when symbols are printed (e.g. in information dialogs and
generated documentation).
The printed representation now also uses shorthands.
Before:
config A
bool
prompt "foo" if C && D
default A if B && C && D
depends on C && D
After:
config A
bool "foo"
default A if B
depends on C && D
- Before writing a configuration file or header, Kconfiglib now
compares the previous contents of the file against the new contents,
and skips the write if there's no change. This avoids updating the
modification time, and can save work.
A message like "No change to '.config'" is shown when there's no
change.
- .config now has '# end of <menu>' comments to make it easier to see
where a menu ends. This was taken from a change to the C tools.
- load_config() and write_(min_)config() now return a message that can
be printed with print(kconf.load_config()). This allows messages to
be reused in e.g. the configuration interfaces (nice now that there's
also a "No change to..." string).
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
If argument for log_strdup is from ro memory then there is
no point to duplicate it. This may happen if function logs
variables coming from outside, e.g. function argument.
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Issue was caused by pointer arithmetic.
This commit cast pointer of struct data to u8_t pointer
and makes arithmetic explicitly by adding the exact value.
fixes#16572
Signed-off-by: Andrzej Puzdrowski <andrzej.puzdrowski@nordicsemi.no>
Convert all board_set_xxer(foo) calls to board_set_xxer_ifndef(foo),
which allows the user to make their own decision at CMake time.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
This helps by letting us add checks for when the runner has already
been set. There is documentation saying you can set
-DBOARD_DEBUG_RUNNER at the command line and have it take effect,
which turns out not to be true for a large number of boards.
A status message helps the user debug.
(We'll address the existing in-tree boards in the next patch.)
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Change removes tracing hooks before threads are initialized
and thread switched out hook for ARM before first time switching
to main thread.
Signed-off-by: Marek Pieta <Marek.Pieta@nordicsemi.no>
The structure of the va_list type is architecture-dependent, and it
doesn't seem possible to initialize va_list variables in a portable way
(except by using va_start()). In particular, the x86_64 ABI defines the
type like this:
typedef struct {
unsigned int gp_offset;
unsigned int fp_offset;
void *overflow_arg_area;
void *reg_save_area;
} va_list[1];
Fortunately, the va_start() macro expects an uninitialized va_list
variable, so we can simply remove the initializers to make the code
portable.
Signed-off-by: Jakob Olesen <jolesen@fb.com>
This adds code to each page needed for gathering google analytics
tracking data to the LF-provided Global site tag.
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Given that the section name and boundary simbols can be inferred from
the struct object name, it makes sense to create an iterator that
abstracts away the access details and reduce the possibility for
mistakes.
Signed-off-by: Nicolas Pitre <npitre@baylibre.com>
