Change binding for ST sensors property 'irq-gpios' to optional for the
cases of in which its obvious from the driver that the property is
optional (there's an ifdef based on the #define
DT_INST_0_ST_LIS2DH_IRQ_GPIOS_*).
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix a bug where in tx data PDU enqueued, while a ctrl PDU is
deferred due to Encryption setup being in progress, is
leaked causing HCI Tx Buffer Overflow crash.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix check in start encryption to disallow new encryption
setup while there is one already in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix MIC failure on re-encryption procedure when responding
at the same time to peer initiated feature request.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix control tx queue handling to correctly pause control PDU
responses during encryption setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Added implementation to cache Data Length Procedure when
another control procedure is in progress.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Workaround, defer peer initiated encryption while local
initiated procedure with instant is not complete. Peer
master has sent CONN_UPDATE_IND in response to
CONN_PARAM_REQ, and also has initiated a Encryption Setup
thereafter. In this case, avoid corruption of the connection
update context by deferring the Encryption Setup.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
Fix implementation to correctly cache the control procedures
initiatable by local and peer. And, fix feature exchange and
version information procedures from being disallowed by
having then as cached requests to the controller.
Relates to #15256.
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
All compiler flag checks are cached for build-time performance reasons
except for the test that tests the toolchain itself.
It is believed that this test was left uncached because at the time,
there was not enough trust in the caching mechanism. But time has
shown that the caching mechanism is safe. So cache this test as well.
This improves build-time performance and also reduces noise in the
logs.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
When guessing the build folder, the current path might not exist at all,
leading to an uncaught exception when trying to list its folders. Fix
this by making sure the path exists at all first.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This adds a simple infinite loop when double exception is raised.
Without this, if double exception occurs, it would execute
arbitrary code.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This provides an implemention for z_soc_irq_is_enabled()
as it is needed for multi-level interrupts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
This follows the z_arch_irq_en-/dis-able() so that the SoC
definitions are responsible for functions related to multi-level
interrupts.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
There is an API to query if any IRQ is enabled but there is
none to query individual IRQ line. So add one.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
The log from CMake invocation's are now dominated by west
modules. This noise can hide important warnings.
To fix this we drop the logging.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A recent developer experience study has pointed out that it's very
common for people to miss that the minimum cmake version required by
zephyr is higher than that which is commonly packaged by Linux
distributions.
Since this is a serious usability issue, it's worth adding extra
checking from zcmake.py to make sure that west commands which run
cmake always print a sensible error message if the cmake version used
is too old. Make that happen.
Signed-off-by: Marti Bolivar <marti.bolivar@nordicsemi.no>
Currently, the interrupt service code manually raises the CPU task
priority to the priority level of the vector being serviced to defer
any lower-priority interrupts. This is unnecessary; the local APIC
is aware that an interrupt is in-service and accounts for its priority
when deciding whether to issue an overriding interrupt to the CPU.
Signed-off-by: Charles E. Youse <charles@gnuless.org>
Error-out when 'project' is invoked before boilerplate.cmake is
included. This is not supported and causes obscure errors.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
A lot of the Kconfig stuff gets copied around, so encourage a clean
compact style:
- Reduce license header spam
- Fix some broken indentation
- Turn a meaningless 'menuconfig' into a 'config'
- Remove a redundant QMSI menu
- Unscrunch comments: #Foo -> # Foo
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Move the inclusion of the littefs Kconfig options inside the
'if FILESYSTEM' block so we don't leak Kconfig symbols if FILESYSTEM
support isn't enabled.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Drop the old deprecation warning about
ZEPHYR_TOOLCHAIN_CAPABILITY_CACHE. Sufficient time has passed to allow
users to migrate.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
This fixes some typos. Also fix the meaning of a struct field
where the confusion caused by copy-and-paste from another
field.
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Correctly set the separator as a semicolon on Windows when
constructing the PYTHONPATH environment variable so that CMake
doesn't intepret it and swallow it.
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This is required to get the watchdog test and sample working since the
required wdt device name macro is generic there.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Such watchdog timer is found on mec1501.
It comes with a support of dbg stall feature and interrupt support.
It does not support multistaging.
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Get things started for Zephyr 2.1 release notes.
Individual PRs will update their appropriate sections.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
When running run_ci.sh locally with:
./scripts/ci/run_ci.sh -l -b master -R upstream/master..
we export BSIM_OUT_PATH unconditionally which causes sanitycheck to fail
on nrf52_bsim (it depends on BSIM_OUT_PATH variable).
Check if the path defined in BSIM_OUT_PATH is available and unset env.
variable if it is not.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add iterator function to iterate over all connection objects.
Make type a bitmap so that it can be used as a bitmask to select which
conns to receive foreach callback.
Use foreach function internally where possible.
Signed-off-by: Joakim Andersson <joakim.andersson@nordicsemi.no>
Allows the user to pass a provisioning input complete callback to the
provisioning module, letting the application stop displaying its output
OOB value when the other party finishes their OOB input.
Signed-off-by: Trond Einar Snekvik <Trond.Einar.Snekvik@nordicsemi.no>
Made BT_HCI_TX_STACK_SIZE configurable and added BT_HCI_ECC_STACK_SIZE.
These changes are necessary to allow vendors to adjust for other
achitectures.
Signed-off-by: Morten Priess <mtpr@oticon.com>
Rework the BT_ASSERT infrastructure with the following changes:
- Transition from LOG() macros to printk()
- Allow the BT_ASSERT() macro to map directly to stancard __ASSERT()
- Allow printing of the assert reason to be disabled
- Switch from k_oops() to k_panic() configurable
There are 2 reasons for using printk() instead of LOG():
- BT_ERR uses deferred logging by default, which is problematic with
ASSERTs
- The __ASSERT() macro in Zephyr uses printk()
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
