These features are available only for SPIM3 and when they are enabled
but this instance is not, the compilation fails. So they cannot be
enabled by default (as currently), but only when it is actually needed
(and possible).
Update the module revision to fix the issue in nrfx_config_nrf52840.h.
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
This commit introduces separate "compatible" strings for DTS nodes
representing different types of Nordic SPI peripherals. Previously
"nordic,nrf-spi" was used for both SPI and SPIM. SPIS was already
handled separately.
Quite a few files need to be touched by this commit but the changes can
be divided into groups of related or very similar ones, distinguishable
by the initial part of the path to the modified file:
* dts/bindings/spi/
new binding for "nordic,nrf-spim" is added and common fields for all
3 types of Nordic SPI peripherals are extracted to a shared file
* dts/arm/nordic/
"compatible" properties in spiX nodes are updated (when there is no
choice as only one type of SPI peripheral is available) or replaced
with a comment pointing out that the proper type of peripheral needs
to be picked at some upper layer
* drivers/spi/
spi_nrfx_spim driver is updated with the new form of macros generated
from dts
* boards/
all spiX nodes in dts files for boards equipped with an nRF chip are
updated with the proper "compatible" property, according to the type
of SPI peripheral that is currently selected for the board by the
corresponding Kconfig choice option (SPI_x_NRF_SPI*)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
This commit introduces separate "compatible" strings for dts nodes
representing different types of Nordic TWI peripherals. Previously
"nordic,nrf-i2c" was used for both TWI and TWIM, and TWIS was not
supported.
Quite a few files need to be touched by this commit but the changes can
be divided into groups of related or very similar ones, distinguishable
by the initial part of the path to the modified file:
* dts/bindings/i2c/
new bindings for "nordic,nrf-twim" and "nordic,nrf-twis" are added
and the one for "nordic,nrf-i2s" is renamed to "nordic,nrf-twi",
common fields for all these bindings are extracted to a shared file
* dts/arm/nordic/
"compatible" properties in i2cX nodes are updated (when there is no
choice as only one type of TWI peripheral is available) or replaced
with a comment pointing out that the proper type of peripheral needs
to be picked at some upper layer
* drivers/i2c/
both flavors of i2c_nrfx drivers are updated with the new names of
macros generated from dts
* boards/
all i2cX nodes in dts files for boards equipped with an nRF chip are
updated with the proper "compatible" property, according to the type
of TWI peripheral that is currently selected for the board by the
corresponding Kconfig choice option (I2C_x_NRF_TWI*)
Signed-off-by: Andrzej Głąbek <andrzej.glabek@nordicsemi.no>
For CMSIS compilation, we define __PROGRAM_START
to avoid compiling the bss/data initialization
routines provided by CMSIS.
Signed-off-by: Ioannis Glaropoulos <Ioannis.Glaropoulos@nordicsemi.no>
Use the new 'compatible:' and 'include:' syntaxes, and clean it up like
for other bindings.
Shorten the description, because it appears in the output as a comment
above the generated macros, and it looks neater. I asked Mateusz what
kind of device it is.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Stop linking interface libraries against zephyr_interface. This is
cargo cult code that in practice does nothing.
Signed-off-by: Sebastian Bøe <sebastian.boe@nordicsemi.no>
The start timestamp was supposed to signify the starting point of the
clear procedure. The code was incorrectly initializing it to the *end*
point of the procedure.
Fixes#19263
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
'Specifier' is devicetree specalese for data associated with interrupts,
GPIOs, etc., e.g. <1 2> and <3 4> in
pwms = <&ctrl-1 1 2 &ctrl-2 3 4>;
It's probably unnecessarily confusing to call it that. Call it 'data'
instead, which is a bit more straightforward.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
edtlib.Device is just a devicetree node augmented with binding
information and some interpretation of properties. Rename it to
edtlib.Node to make that clearer. That also avoids calling things like
flash partition nodes "devices", which is a bit confusing.
I called it edtlib.Device instead of edtlib.Node originally to avoid
confusion with dtlib.Node, but in retrospect it probably makes it more
confusing on the whole. Something like edtlib.ENode might work too, but
it's probably overkill. Clients of edtlib.py only interact with
edtlib.Node, so the only potential for confusion is within edtlib.py
itself, and it doesn't get too bad there either.
Piggyback some documentation nits, and consistently write it
"devicetree" instead of "device tree", to match the spec.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
Do not check size of REQUEST_BUFFER for Data stage IN
transactions. The check can not be done effectively because
the pointer (usb_dev.data_buf) can be changed and the actual
size of the buffer used is unknown at this point.
Signed-off-by: Johann Fischer <j.fischer@phytec.de>
Various C and Assembly modules
make function calls to z_sys_trace_*. These merely call
corresponding functions sys_trace_*. This commit
is to simplify these by making direct function calls
to the sys_trace_* functions from these modules.
Subsequently, the z_sys_trace_* functions are removed.
Signed-off-by: Mrinal Sen <msen@oticon.com>
Enable CMSDK GPIO driver on v2m_musca_b1 SoC/Board. Add LEDs that are
on the board and init the pinmux for those LEDs to work.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Utilize CONFIG_TRUSTED_EXECUTION_NONSECURE to decide if we do pinmux.
This Kconfig option is more useful since we only set the _SECURE
version isn't set if we are ignoring the security mode feature.
Move the LED pinmux setup into the not NONSECURE case.
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Use the new 'compatible:', 'include:', and 'required:' keys, and clean
it up like other bindings.
Shorten the 'description:' text, because it appears in the output as a
comment above the generated macros, and it looks neater.
Fixes: #19385
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
PR #18780 introduces a way to decouple pthread support from the general
CONFIG_POSIX_API global switch. This commit modifies the build of
SimpleLink components to take advantage of it, since SimpleLink
libraries only require pthread, sem, clock, and sleep support, not
entire POSIX API.
This fixes the build errors in the http_get sample introduced
by the merge of #18736. As such, this patch also removes
cc3220sf_launchxl exclude from sample.yaml of that sample.
Signed-off-by: Vincent Wan <vincent.wan@linaro.org>
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Newlib has it defined in sys/timespec.h, and thus per the established
conventions, everything else relies on it being there. Specifically,
minimal libc acquires sys/timespec.h with a similar definition, and
POSIX headers rely on that header. Still with a workaround for old
Newlib version as used by Xtensa (but all infrastructure for that is
already there; actually, this patch removes duplicate similar-infra,
which apparently didn't work as expected by now, so now we have a
single workaround, not 2 different once).
To emphasize a point, now there 2 headers:
sys/_timespec.h, defining struct timespec, and
sys/timespec.h, defining struct itimerspec
That's how Newlib has it, and what we faithfully embrace and follow,
because otherwise, there will be header conflicts depending on
various libc and POSIX subsys options.
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
As it stands, this option leads to conflict between Newlib and POSIX
headers. (Which needs to be resolved separately.)
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
Allow to enable individual POSIX components, like Pthreads.
CONFIG_POSIX_API now just enables all of individual POSIX components,
and sets up environment suitable to easily port POSIX applications to
Zephyr.
Fixes: #12965
Signed-off-by: Paul Sokolovsky <paul.sokolovsky@linaro.org>
To catch more potential issues with PRs, build common kernel tests
in addition to the synchronization sample which does not run any tests.
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for up-and-down counter mode, which aligns the center of
each channel's pulses instead of their initial edges. This is enabled
on a PWM periphral by adding the "center-aligned" property to the
device tree, e.g.:
&pwm0 {
status = "okay";
center-aligned;
ch0-pin = <15>;
ch1-pin = <17>;
ch1-inverted;
};
Signed-off-by: Jim Paris <jim@jtan.com>
MAX() and MIN() were evaluating arguments twice. If arguments are
functions they were called twice which resulted in bigger code
and potential misbehavior.
Added alternative macros (Z_MAX, Z_MIN) which can be used instead.
Macros have usage limitations thus they are not replacements. They
are also relying on GCC extension thus placed in gcc.h
Signed-off-by: Krzysztof Chruscinski <krzysztof.chruscinski@nordicsemi.no>
Some modules use snprintk to format the settings keys. Unfortunately
snprintk is tied with printk which is very large for some embedded
systems.
To be able to have settings enabled without also enabling printk
support, change creation of settings key strings to use bin2hex, strlen
and strcpy instead.
A utility function to make decimal presentation of a byte value is
added as u8_to_dec in lib/os/dec.c
Add new Kconfig setting BT_SETTINGS_USE_PRINTK
Signed-off-by: Kim Sekkelund <ksek@oticon.com>
The ESP tool is being executed directly in the esp32 runner,
assuming the tool is executable by itself. However, it would
fail under Windows as subprocess.check_call() cannot execute
Python scripts directly. The fix is to execute the Python
interpreter and passing the script path as a command line
parameter.
Fixes#19098
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Use the device tree to assign the correct peripheral clock to each
UART/USART/LEUART. Previously, the clock identifier was determined
through the sequence number of the instantiated UART. This meant
configuring all UARTs when only one of the later UARTs was required.
Signed-off-by: Oane Kingma <o.kingma@interay.com>
Should be --bindings-dirs, not --bindings-dir, but the 'argparse' module
supports shortening flags, so it worked anyway.
Broke my grepping though.
Signed-off-by: Ulf Magnusson <Ulf.Magnusson@nordicsemi.no>
When not using ticker compatibility mode in legacy
controller, ticker job should not be disabled inside radio
events.
Ticker compatibility mode was introduced in
commit 3a9173afe1 ("bluetooth: controller: Revised ticker
for improved conflict resolution").
Signed-off-by: Vinayak Kariappa Chettimada <vich@nordicsemi.no>
