This is a start to move away from the C99 {u}int{8,16,32,64}_t types to
Zephyr defined u{8,16,32,64}_t and s{8,16,32,64}_t. This allows Zephyr
to define the sized types in a consistent manor across all the
architectures we support and not conflict with what various compilers
and libc might do with regards to the C99 types.
We introduce <zephyr/types.h> as part of this and have it include
<stdint.h> for now until we transition all the code away from the C99
types.
We go with u{8,16,32,64}_t and s{8,16,32,64}_t as there are some
existing variables defined u8 & u16 as well as to be consistent with
Zephyr naming conventions.
Jira: ZEP-2051
Change-Id: I451fed0623b029d65866622e478225dfab2c0ca8
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Fix doxygen comment typos used to generate API docs
Change-Id: I6fd5051c99bdcc731740c92001e525349c254d85
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
CONFIG_* usually come from Kconfig, rename variables that are locally
defined to avoid confusion about where they are set.
Change-Id: I83b8459913c5deb68dc1b9f5386b8934363a6d1f
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Rearming the riscv machine timer is done by first updating the
mtimecmp low value register. If the low value is updated with a
relatively small value, a timer interrupt can be generated while
updating the mtimecmp high value.
To avoid such a spurious interrupt to occur, disable the timer
interrupt while rearming the timer.
Change-Id: I50ab3f19554a9a8dfe70943b6da0d20be3de88dc
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Clear pending IRQ when starting and restore back the RTC1 state when
disabling sys_clock, to avoid issues when soft rebooting the device or
chainloading another Zephyr image (e.g. mcuboot).
Change-Id: I693d9168196ad2cfb8475ecfa2051eac043b1fbd
Signed-off-by: Ricardo Salveti <ricardo.salveti@linaro.org>
We need to account for the interrupt happening in the middle
of the calculation.
Issue: ZEP-1546
Change-Id: I193534856d7521cac7ca354d3e5b65e93b984bb1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Fixes an unlikely issue that could arise if the RTC handler in the nRF RTC
driver was blocked for more than one sys tick interval. This could lead to
_sys_clock_tick_announce() being called with more than one sys tick when the
kernel did not expect it.
Jira: ZEP-1763
Change-ID: I5608fca6f0ac97a17c1ce452c1c5c67696a49a9a
Signed-off-by: Øyvind Hovdsveen <oyvind.hovdsveen@nordicsemi.no>
The LOAPIC driver was doing this in a way susceptible to a very
nasty race condition: the CCR register could reset and be readable
before the associated interrupt could be delivered.
This resulted in a small window of time where CCR was reset, but
accumulated_cycle_count not updated, causing some calls to
k_cycle_get_32() to appear to jump backwards in time.
Just use the x86 TSC for these cycle timestamps. A divisor may be
provided in cases where the CPU clock speed is some multiple of
the bus speed. Modern x86 CPUs do not change their TSC rate even
when adjusting cpu frequency, so this should be a reliable timing
source.
Issue: ZEP-1546
Change-Id: I441bd8e32af866587a91f306e89e3fa0ece512b5
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
It's possible the timer interrupt could occur when performing the
computation, resulting in incorrect values returned.
It's still possible for bad values to be returned if the function is
called with interrupts locked, but that is only fixable with a second
timer source.
Issue: ZEP-1546
Change-Id: I16d5b04c3e32377f7249eb4fb1bf2f7c22bd0836
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is a reworked version of the previous RTC driver. The main
changed is related to the handling _timer_idle_exit() on non-RTC
wake-ups. The previous version didn't announce the elapsed time
to the kernel in _timer_idle_exit(). Additionally, the driver now
makes sure never to announce more idle ticks than the kernel asked
for, since the kernel does not handle negative deltas in its timeout
queues.
Change-Id: I312a357a7ce8f0c22adf5153731064b92870e47e
Signed-off-by: Wojciech Bober <wojciech.bober@nordicsemi.no>
Signed-off-by: Øyvind Hovdsveen <oyvind.hovdsveen@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Some arches may want to define this as an inline function, or
define in core arch code instead of timer driver code.
Unfortunately, this means we need to remove from the footprint
tests, but this is not typically a large function.
Issue: ZEP-1546
Change-Id: Ic0d7a33507da855995838f4703d872cd613a2ca2
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
On Nios II the same timer peripheral IP block can't function
as a periodic system timer and a high-resolution timestamp source.
A second timer instance with different configuration is required.
Until that is implemented, just return the accumulated cycle count.
Issue: ZEP-1546
Change-Id: If3dcebdc60334bf3aa0ab45ccd82f1b2531b6bc1
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
There are race conditions trying to coordinate the value between
the accumulated_cycle_count (updated at interrupt time) and
trying to compute the delta from the last interrupt using the
mtime registers. An unlucky call could result in the timestamp
appearing to move backwards in time.
the 'mtime' register isn't reset at every interrupt. Since we just
want a cycle counter, report its raw value.
Issue: ZEP-1546
Change-Id: I9f404b33214d6502fea47374fcf0ecbf84ef8136
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This driver was written for v1.5 before the introduction of the function
_sys_clock_final_tick_announce. At that time _sys_idle_elapsed_ticks was reset
to 0 automatically. Now that it is reset by the new function, the driver needed
to be fixed.
Change-Id: I039b4dbacb691aaf992b37e44404abd19a54a833
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
This is needed by next commit as some assembly files handling interrupts use
some options from this file.
This file is not included in next commit to separate code and build system
aptches.
Change-Id: Iff3a8019362599beb0c0058c3169480fa5183c1c
Signed-off-by: Mazen NEIFER <mazen@nestwave.com>
Enabling the riscv_machine_timer driver by default for riscv32
causes compilation issues on riscv32 boards (like zedboard_pulpino)
not supporting it.
Boards supporting the driver enable it via their respective
config file.
Change-Id: Ieb0d25fa339834fd386ae2725f40b6b7b72dc52b
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
This flag is no longer necessary and TICKLESS_IDLE will be
enabled by default if SYS_POWER_MANAGEMENT is enabled.
Jira: ZEP-1325
Change-Id: Ic6cd4b8dc0a17c6a413cabf6509b215a4558318d
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
riscv defines the machine-mode timer registers that are implemented
by the all riscv SOCs that follow the riscv privileged architecture
specification.
The timer registers implemented in riscv-qemu follow this specification.
To account for future riscv SOCs, reimplement the riscv_qemu_driver by
the riscv_machine_driver.
Change-Id: I645b03c91b4e07d0f2609908decc27ba9b8240d4
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Replace _ScbExcPrioSet with calls to NVIC_SetPriority as it handles both
interrupt and exception priorities. We don't need to shift around the
priority values for NVIC_SetPriority.
Jira: ZEP-1568
Change-Id: Iccd68733c3f7faa82b7ccb17200eef328090b6da
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Convert driver to use the CMSIS NVIC APIs rather than the internal ones
so we can remove them in the future.
Change-Id: I31c2f37bc0aa35668a441f4ef2821b768dd7b817
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Remove use of __scs structures and defines in place of CMSIS defined
ones. Also, use __ISB() instead of inline asm.
Jira: ZEP-1568
Change-Id: I8798206a12680f6c50105c7c28112632ac9dde50
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
Replace the existing Apache 2.0 boilerplate header with an SPDX tag
throughout the zephyr code tree. This patch was generated via a
script run over the master branch.
Also updated doc/porting/application.rst that had a dependency on
line numbers in a literal include.
Manually updated subsys/logging/sys_log.c that had a malformed
header in the original file. Also cleanup several cases that already
had a SPDX tag and we either got a duplicate or missed updating.
Jira: ZEP-1457
Change-Id: I6131a1d4ee0e58f5b938300c2d2fc77d2e69572c
Signed-off-by: David B. Kinder <david.b.kinder@intel.com>
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
The riscv-qemu timer driver does not implement
TICKLESS_IDLE
Change-Id: I3eeb5abb05b3f16b55ab9343c2045295b3010cfd
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
The pulpino_timer driver does not implement TICKLESS_IDLE
for the time being.
Change-Id: I0cce8c8a7e203d551a924863462e6c86af4c98ff
Signed-off-by: Jean-Paul Etienne <fractalclone@gmail.com>
Force-align all variables defined via asm .word to ensure 4-byte
alignment.
The straddled_tick_on_idle_enter variable was a bool, which resolved in
an one-byte quantity. Changing it to a 32-bit integer. It would have
occupied 4 bytes anyway with alignment.
Fixes ZEP-1549.
Change-Id: If5e0aa1a75dbc73d896b44616f059d221fe191c6
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
On the nRF5x platforms we need always need the NRF_RTC_TIMER and it
depends on the CLOCK_CONTROL_NRF5. So enable all of these always.
Fixes issues if one tries to build nRF5x platforms w/o CONFIG_BLUETOOTH.
Change-Id: I0f9af785e785f37ec289a935ddf70ee6dec08cd4
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
rename NANOKERNEL_TICKLESS_IDLE_SUPPORTED to
TICKLESS_IDLE_SUPPORTED and remove nanokernel occurances in Kconfig
files.
Make TICKLESS_IDLE depend on hardware that supports it.
Change-Id: I6a2e4fb0f7cf4b45475b48e71823ea089ee98759
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
PRINTK was conflicting, reanme to DBG.
Jira: ZEP-953
Change-Id: If5d6ef385c5ed223f6f7eae9bde887ae4a1b946a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
That module is not used anymore: it was introduced pre-Zephyr to add
some kind of awareness when debugging ARM Cortex-M3 code with GDB but
was never really used by anyone. It has bitrotted, and with the recent
move of the tTCS and tNANO data structures to common _kernel and
k_thread, it does not even compile anymore.
Jira: ZEP-1284, ZEP-951
Change-Id: Ic9afed00f4229324fe5d2aa97dc6f1c935953244
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The nRF RTC driver, which is used a system clock driver due to the lack
of SysTick hardware on the SoC, was using too much CPU time in its
_timer_idle_exit() implementation due to the use of 64-bit arithmetical
operations. This was causing the ISR wrapper to add excessive latency to
critical interrupts, causing BLE controller asserts.
This patch addresses the issue by using exclusively RTC ticks instead of
OS ticks, thus avoiding the necessity to convert during
_timer_idle_exit() calls, which are the most critical to interrupt
latency.
In addition the driver is now able to detect setting tick events in the
past due to it being interrupted by a higher priority context, and will
reschedule and trigger the ISR at the same time.
Change-id: I56a3be96b9fdd554c3650012d647af2f0415eb8a
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
When going into DEEP_SLEEP state, the ARC timer
needs to be restored.
This implements the function to restore the timer
after sleep.
As the time spent during sleep is not currently known,
the timer is expired to reschedule the application task.
Jira: ZEP-1224
Change-Id: I22a30d0fd79f177cf166b9a29dc78d68f7d7fbad
Signed-off-by: Julien Delayen <julien.delayen@intel.com>
ccflags-y += -I$(srctree)/kernel/unified/include isn't need so lets
remove it.
Change-Id: I910bbac4a189de965d844f5fc36571e8dcb5705d
Signed-off-by: Kumar Gala <kumar.gala@linaro.org>
This commit replaces the nanokernel.h include by kernel.h.
Change-Id: Ib42fbf2d9f77a73c0831f569b3dbbfb342ea2e1d
Signed-off-by: Flavio Santes <flavio.santes@intel.com>
The nRF5x series SoCs do not implement systick, hence we disable
CORTEX_M_SYSTICK.
Instead, use nRF SoC Series NRF_RTC1 for system clock interfaces.
The kernel system clock interface is implemented using the low
power real time counter NRF_RTC1. NRF_RTC0 is used by the BLE
controller.
In addition, cleanup nRF5x series defconfig to be consistent.
Jira: ZEP-742
Jira: ZEP-1308
Jira: ZEP-1315
Change-id: I0f6cc1836fe0820a65f2cbb02cf5ae7e9eb92e1d
Signed-off-by: Vinayak Chettimada <vinayak.kariappa.chettimada@nordicsemi.no>
Signed-off-by: Carles Cufi <carles.cufi@nordicsemi.no>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Make the systick feature optional that can be selected by the SoC.
Change-Id: I4a405640b84daecc17fc1882743d3cafb78ff861
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
There was a lot of duplication between architectures for the definition
of threads and the "nanokernel" guts. These have been consolidated.
Now, a common file kernel/unified/include/kernel_structs.h holds the
common definitions. Architectures provide two files to complement it:
kernel_arch_data.h and kernel_arch_func.h. The first one contains at
least the struct _thread_arch and struct _kernel_arch data structures,
as well as the struct _callee_saved and struct _caller_saved register
layouts. The second file contains anything that needs what is provided
by the common stuff in kernel_structs.h. Those two files are only meant
to be included in kernel_structs.h in very specific locations.
The thread data structure has been separated into three major parts:
common struct _thread_base and struct k_thread, and arch-specific struct
_thread_arch. The first and third ones are included in the second.
The struct s_NANO data structure has been split into two: common struct
_kernel and arch-specific struct _kernel_arch. The latter is included in
the former.
Offsets files have also changed: nano_offsets.h has been renamed
kernel_offsets.h and is still included by the arch-specific offsets.c.
Also, since the thread and kernel data structures are now made of
sub-structures, offsets have to be added to make up the full offset.
Some of these additions have been consolidated in shorter symbols,
available from kernel/unified/include/offsets_short.h, which includes an
arch-specific offsets_arch_short.h. Most of the code include
offsets_short.h now instead of offsets.h.
Change-Id: I084645cb7e6db8db69aeaaf162963fe157045d5a
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
PRIMARY, SECONDARY, NANOKERNEL, MICROKERNEL init levels are now
deprecated.
New init levels introduced: PRE_KERNEL_1, PRE_KERNEL_2, POST_KERNEL
to replace them.
Most existing code has instances of PRIMARY replaced with PRE_KERNEL_1,
SECONDARY with POST_KERNEL as SECONDARY has had a longstanding bug
where the documentation specified SECONDARY ran before the kernel started
up, but actually ran afterwards.
Change-Id: I771bc634e9caf7f17dbf214a270bc9967eed7d32
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
MVIC does not have _REG_TIMER_CFG defined because it does
not have a timer config register. Add checks for MVIC at
places where it is used.
Jira: ZEP-1015
Change-Id: I59f5c43cc2d1b17cf9e88b940631c2542e9729ab
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Interrupt stubs now just push the ISR and parameter onto the stack
and jump to the common interrupt code, never to return.
Change-Id: I82543d8148b5c7dfe116c43f41791f852614bb28
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Update the power sample and drivers with the new device driver power
management API using the existing logic
Jira: ZEP-954
Change-Id: Idd94232e458767635973e94e9fc673c01612c1e2
Signed-off-by: Amir Kaplan <amir.kaplan@intel.com>
Removed CONFIG_INT_LATENCY_BENCHMARK dead code.
CONFIG_INT_LATENCY_BENCHMARK depends on ARCH="x86", it will never
be true for ARM code.
Change-Id: Ia5779a69b1bf670ebb140c2923c9fe0af6b781d4
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
Removed unused workaround in loapic. There are no references
of usage.
Change-Id: I8700b4b7ce8efef5e7b95e6cdd2b201eae3f1f37
Signed-off-by: Javier B Perez <javier.b.perez.hernandez@intel.com>
They must provide the k_cycles_get_32() API and must not refer to
command packets: the latter do not exist on unified kernels.
Change-Id: Ia354dc060e5ad2595850f97da82d8feb590d16b7
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
DEFINE_DEVICE_PM macro was not defining device_pm_ops
as 'static'. Fixes the issue and impacted areas.
Jira: ZEP-639
Change-Id: I5e1de6af97bf7b2b690af0c81034ce167e655e43
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Originally, x86 just supported APIC. Then later support
for the Mint Valley Interrupt Controller was added. This
controller is mostly similar to the APIC with some differences,
but was integrated in a somewhat hacked-up fashion.
Now we define irq_controller.h, which is a layer of abstraction
between the core arch code and the interrupt controller
implementation.
Contents of the API:
- Controllers with a fixed irq-to-vector mapping define
_IRQ_CONTROLLER_VECTOR_MAPPING(irq) to obtain a compile-time
map between the two.
- _irq_controller_program() notifies the interrupt controller
what vector will be used for a particular IRQ along with triggering
flags
- _irq_controller_isr_vector_get() reports the vector number of
the IRQ currently being serviced
- In assembly language domain, _irq_controller_eoi implements
EOI handling.
- Since triggering options can vary, some common defines for
triggering IRQ_TRIGGER_EDGE, IRQ_TRIGGER_LEVEL, IRQ_POLARITY_HIGH,
IRQ_POLARITY_LOW introduced.
Specific changes made:
- New Kconfig X86_FIXED_IRQ_MAPPING for those interrupt controllers
that have a fixed relationship between IRQ lines and IDT vectors.
- MVIC driver rewritten per the HAS instead of the tortuous methods
used to get it to behave like LOAPIC. We are no longer writing values
to reserved registers. Additional assertions added.
- Some cleanup in the loapic_timer driver to make the MVIC differences
clearer.
- Unused APIs removed, or folded into calling code when used just once.
- MVIC doesn't bother to write a -1 to the intList priority field since
it gets ignored anyway
Issue: ZEP-48
Change-Id: I071a477ea68c36e00c3d0653ce74b3583454154d
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Defined in all SoCs, but never referenced anywhere. That definition has
been replaced by CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC.
Change-Id: I1801f72a03925717ded6fbfdef22b1993f843461
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
A previous re-work of IRQ priorities was led astray by an incorrect
comment. Priority level 1 is not a non-maskable interrupt priority.
In addition, zero latency IRQs are not implemented on ARC.
Timer driver now doesn't specify IRQ_ZERO_LATENCY (as that wouldn't be
correct) and its IRQ priority is now tunable in Kconfig. The default is 0.
IPM driver on both ARC and x86 side were being configured with hard-coded
priority of 2, which wasn't valid for ARC and caused an assertion failure.
The priority level is now tunable with Kconfig and defaults to 1 for ARC.
Issue: ZEP-693
Change-Id: If76dbfee214be7630d787be0bce4549a1ecbcb5b
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
We have already done this on x86 and ARM. The policy is as follows:
* IRQ priority levels starting at 0 all have the same semantics and
do not have special properties. The priority level is either ignored
on arches which do not support programmable priority levels, or lower
priority levels take precedence over higher ones.
* Special-case priorty levels are specified via flags, in which case
the supplied priority level is ignored.
Issue: ZEP-60
Change-Id: Ic603f49299ee1426fb9350ca29d0b8ef96a1d53a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
This is part of a change to enable device suspend/resume and
Deep Sleep support in applications. Adds suspend/resume handling
in loapic timer.
Jira: ZEP-512
Change-Id: I9da2c8419bd9109fb71ef5a6caf736de7c7de9e1
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Tickless idle is not yet supported. We program the timer period
to the desired system clock tick rate (sys_clock_hw_cycles_per_tick).
This was renamed to the same name used in the Altera Embedded IP
Peripherals Guide; used by other CPUs than Nios II.
Change-Id: Ic4fca8c16b923295b77b63f98f45cd3483c5f560
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Building microkernel for ARC causes a compiler error
due to missing declaration of _sys_idle_elapsed_ticks.
Declare this as extern.
Jira: ZEP-397
Change-Id: I83701f693fea0fcb1ae2c30e0c52abe7987de1f1
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
The timer implementation for ARC currently requires timer0 to be present.
I've added a comment that this is an assumption and to encourage developers
to build the ARC CPU with Timer0, when it is to be used with Zephyr.
There is also an optional provision for a Timer1. In future, this
code could be conditional to use either timer.
Change-Id: I4eb3aec59ba4e85f8b70d5531b21bdaab00b93bb
Signed-off-by: Chuck Jordan <cjordan@synopsys.com>
Basic build framework for Nios2. Everything is stubbed out,
we just want to have a build going so that we can start to
parallelize implementation tasks.
This patch is not intended to be functional, but should be
able to produce a binary for all the nanokernel-based
sanity checks.
Change-Id: I12dd8ca4a2273f7662bee46175822c9bbd99202a
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Changed names of Kconfig flags, variables, functions, files and
return codes consistent with names used in the RFC. Updated
relevant comments to match the changes.
Origin: Original
Change-Id: Ie7941032d7ad7af61fc02928f74538745e7966e8
Signed-off-by: Ramesh Thomas <ramesh.thomas@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: Ie1d391945cd1cfb9a5dc199783c2d224eb1b0ef3
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
ASSERT are put each time the timer0 limit register or the timer0 count register
is modified.
Change-Id: I38684d57803de285f4e26c68b449c71396e4c750
Signed-off-by: Simon Desfarges <simon.desfarges@intel.com>
When exiting from tickless idle uppon an external IRQ, the TICK timer
is set to fire at next TICK boundary. The current algorithm can lead
to a point that timer0_count register is higher than the timer0_limit
register.
In this situation the next TICK will fire after the counter has
wrapped and performed another cycle (~133 seconds).
This condition appears when the counter reaches the limit after the
Interrupt Pending flag is checked. At this point the counter is
automatically wrapped to 0, but is set just next to the limit to fire
at next TICK boundary by SW. At exit of the _timer_idle_exit function,
the timer handler is called, and sets the limit to 1 TICK. At this
point the situation is:
- limit register == 1 TICK
- count register is just below the old limit register and higher than
1 TICK
To fix this issue, at _timer_idle_exit, the limit register is always
set to 1 TICK and the count register set such as the next TICK fires
on time.
Change-Id: Ifa002809d426aa04109592e53d2b02a224f51101
Signed-off-by: Simon Desfarges <simon.desfarges@intel.com>
The timer counts from 0 to programmed_limit included.
Change-Id: Ifc8585210c319f5452fafc911d4f6d72c4b91eaa
Signed-off-by: Simon Desfarges <simon.desfarges@intel.com>
This reverts commit 0d50329105.
This breaks sanitychecks in CI. The early_sleep kernel test case is failing
randomly.
Change-Id: I015f20699c052b4089076699fc0180945c4d3d16
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Add support for task_sleep() and fiber_sleep() during the
system initialization. When CONFIG_NANO_TIMEOUTS defined,
before the k_server() starts, kernel uses nanokernel
system clock announce and task sleep functionality.
To give device drivers early sleep functionality, the system
clock has to start on SECONDARY initialization level, same
as most of the drivers.
Change-Id: I5b3cf3da4c8d8398a966e901ab211f2fcee18dd6
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
This reverts commit 3c66686a43.
That commit fixed announcing ticks before the microkernel was up, but
prevented devices initializing before the MICROKERNEL level from having
access to the hi-res part of the system clock, which they could not poll
anymore.
Change-Id: Ia1c55d482e63d295160942f97ebc8e8afd1e8315
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Modifications to timer drivers and interrupt setup, to manage
the tickless idle for the x86 architecture
Change-Id: Ie02d484b7e5636de6ea382ba2eeed57e704c8498
Signed-off-by: Sergio Rodriguez <sergio.sf.rodriguez@intel.com>
The ticker was always initialized in the NANOKERNEL init level. In a
microkernel, this can cause problems if for the some reason the
initialization of the microkernel server is delayed, such as devices
initialization in the NANOKERNEL level taking non-insignificant time to
complete. What happens in that case is the ticker ISR will start firing
and piling up events in the microkernel server stack, and quite quickly
overrun it, since it has a finite size, causing random crashes.
So, in the microkernel, initialize the ticker once the microkernel
server is available. There is no point in sending ticker event before
anyway.
Change-Id: Ie9e13184f6ad35954023faf3bbff26242284b7be
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
It's not a function and requires all its arguments to be build-time
constants. Make this more obvious to the end user to ease confusion.
Change-Id: I64107cf4d9db9f0e853026ce78e477060570fe6f
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Mostly SoC initialization and some kernel subsystems, but also some
device drivers like the interrupt controllers.
Change-Id: I8dc1844c33acd877c075b6b03558fdca6f87500b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
This is the last step before obsoleting DEVICE_DEFINE() and
DEVICE_INIT_CONFIG_DEFINE().
Change-Id: Ica4257662969048083ab9839872b4b437b8b351b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_DEFINE() so that it fits in the 'device' namespace.
Change-Id: I3af3a39cf9154359b31d22729d0db9f710cd202b
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rename it to DEVICE_INIT_CONFIG_DEFINE(), because (a) it was not fitting
in any namespace and (b) it is not used to declare, but rather define a
object.
Change-Id: I1da5822f06b85a9fb024b5b184afd0ccc01012ec
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
On NANOKERNEL level only of course. Some devices, initialized at this
level, may require to get the clock running already.
Change-Id: Id2dd830d915474aac6c080068c2cf356cf841e0c
Signed-off-by: Tomasz Bursztyka <tomasz.bursztyka@linux.intel.com>
The interrupt API has been redesigned:
- irq_connect() for dynamic interrupts renamed to irq_connect_dynamic().
It will be used in situations where the new static irq_connect()
won't work, i.e. the value of arguments can't be computed at build time
- a new API for static interrupts replaces irq_connect(). it is used
exactly the same way as its dynamic counterpart. The old static irq
macros will be removed
- Separate stub assembly files are no longer needed as the stubs are now
generated inline with irq_connect()
ReST documentation updated for the changed API. Some detail about the
IDT in ROM added, and an oblique reference to the internal-only
_irq_handler_set() API removed; we don't talk about internal APIs in
the official documentation.
Change-Id: I280519993da0e0fe671eb537a876f67de33d3cd4
Signed-off-by: Andrew Boie <andrew.p.boie@intel.com>
Change-Id: Id2ee328458c5a1be944e90c34bbc2158464be325
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add null definitions for the interrupt latency measurement API so we
can remove compile fences in C code.
Change-Id: If86eedf79afcb49002108814dd4fb864956eb667
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Removed old style file description and documnetation and apply
doxygen synatx.
Change-Id: I3ac9f06d4f574bf3c79c6f6044cec3a7e2f6e4c8
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the 'priority' parameter from the IRQ_CONFIG macro.
This parameter was not used anymore in any architecture.
The priority is handled in the IRQ_CONNECT macro.
The documentation is updated as well.
Change-Id: I24a293c5e41bd729d5e759113e0c4a8a6a61e0dd
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
The content of include/drivers/hpet.h is really private to
the driver and does not need to be exposed in public include
directory. So move the content into driver code.
Change-Id: Ica442e43c480a6b079b8d3c4e75e67adcfd0ba6b
Signed-off-by: Daniel Leung <daniel.leung@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Removes the following deprecated routines:
nano_cycle_get_32()
task_cycle_get_32()
fiber_cycle_get_32()
isr_cycle_get_32()
Those routines have all been replaced by sys_cycle_get_32().
Change-Id: I8709952633bb87c8963e88caffe1036fb9add527
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Renames _sys_clock_cycle_get() (provided by the timer driver)
to sys_cycle_get_32(). It is the preferred method to read the
hardware clock.
Change-Id: Ifea5213d8c04a8bf7b9114b048c5db0ccee61549
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Put initialization priorities as device driver Kconfig
parameter.
Initialization priority value for each platform is defined
in the platform Kconfig file.
Drivers and platform code use SYS_DEFINE_DEVICE to add
and initialization function.
Change-Id: I2f4f3c7370dac02408a1b50a0a1bade8b427a282
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The HPET reads its frequency at runtime, and thus must set all relevant
global constant values at runtime as well.
Change-Id: I965102bbdcea370297d5a2bbe14177ec0d0d3794
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Some timer devices, such as the HPET, read their frequencies at runtime.
All global constant values must be set at runtime in that case.
Change-Id: I408babce6deb857748a87691132d7e27e88f0bb8
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Do not depend on environment variables and use a kconfig variable
for defining the architecture.
In addition, remove the X86_32 variable, it just duplicates X86 for
not good reason, at least until start supporting MCUs with 64bit.
Change-Id: Ia001db81ed007e6a43f34506fed9be1345b88a4b
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
This module is based on the standard Local APIC and IO APIC source modules.
This modules combines these modules into one source module that exports the
same APIs defined by the Local APIC and IO APIC header modules. These
routine have been adapted for the Quark D2000 Interrupt Controller which has
a cutdown implementation of the Local APIC & IO APIC register sets.
Change-Id: Ic80aa78918483663d76054ebadefa08d8a3f188a
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Flags allow passing IRQ triggering option for x86 architecture.
Each platform defines flags for a particular device and then
device driver uses them when registers the interrupt handler.
The change in API means that device drivers and sample
applications need to use the new API.
IRQ triggering configuration is now handled by device drivers
by using flags passed to interrupt registering API:
IRQ_CONNECT_STATIC() or irq_connect()
Change-Id: Ibc4312ea2b4032a2efc5b913c6389f780a2a11d1
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Rename them to SYSTEM_CLOCK_DISABLE and sys_clock_disable to put
the symbols in the proper namespace and to align with the rest of
the timer APIs.
Change-Id: I341cdb1bd6cc01e5662d8526c293d4e0acd6ec24
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
In order to have a name according to the functionality of the feature.
This commit rename any text, function and variable related with the
Profiler name to Event logger.
Change-Id: I4f612cbc7c37965c35a64f06cc3ce5e3249d90e5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The \NOMANUAL tag is a remnant from days of yore and is no longer
needed or useful. Cleaning up the code references to this.
Change-Id: I1b8cc9c9560d1dbb711f05fa63fd23386789875c
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Change-Id: I2276676142deea21cf8079449ce153f2fb887a8e
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I819d13f0d7a23e3a61dcda6a3ced18810b192158
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I6e3dc44be7bb6d01a7181d8c8e90cdb72120c3db
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I6da43e41f9c6efee577b70513ec368ae3cce0144
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
In order to have drivers that are usable cross architecture the
signature for IRQ_CONFIG needs to be the same to avoid #ifdef hell in
the driver code based on architecture.
Update the macro and it usage for existing drivers
Change-Id: I22e142b21d4e984add231d1dbd97020e4823985f
Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change-Id: I8f51f861e2250c87c296b697ef5b6610ce644b34
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Change all the Intel and Wind River code license from BSD-3 to Apache 2.
Change-Id: Id8be2c1c161a06ea8a0b9f38e17660e11dbb384b
Signed-off-by: Javier B Perez Hernandez <javier.b.perez.hernandez@linux.intel.com>
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Rewrites the LOAPIC timer tickless idle implementation to cover all edge cases.
Change-Id: Ide0a235f298dfc5c75a090a45d1bf8275d81e248
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes tickless idle skew calculation as it is not particularly useful.
The actual "skew" may vary wildly depending upon whether cache is involved
or not.
Change-Id: Ie5c966eba5cdc3cff2610d4c1f3bb673c83ec8b7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes two missed replacements of
_SysIdleElapsedTicks -> _sys_idle_elapsed_ticks
in the timer drivers.
Both were previously missed due to typos.
Change-Id: If55c9624df6f3bd7188e249f74d3ee3de61a68e4
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Add the interrupt profile points for x86 and ARM arquitectures. This
gives information regarding the time when interrupts occur.
Change-Id: Ic876c0e7f9e8819d53e0578416f09146f4456d3d
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
The drivers provide _sys_clock_cycle_get(): moving the public APIs to
the drivers allow them to be aliases of it.
Change-Id: Ic5975a048f2b51f94510f0c3cd5e6ab3a8907718
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Fix the option that enables level triggered interrupts usage.
It depends on CONFIG_HPET_TIMER_LEVEL_HIGH and CONFIG_HPET_TIMER_LEVEL_LOW
configuration parameters.
Change-Id: I3529b1e57b1625e6f0f4b05d9c15eb563e9c4f83
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The initialization procedures need to be called in the
following order:
- basic hardware initialization;
- devices initialization;
- hardware clock initialization, that the kernel needs to
run the kernel server.
This way, the board initialization routines is placed
to the pure_early_init level to make sure it runs first,
all device initialization procedures run at pure_init level,
so they are initialized early enough to be used for debugging
if needed. Hardware clock initialization is placed on
nano_early_init level to make sure hardware clock is initialized
just before the kernel server starts.
Change-Id: Ieecf9f0252c47c621b7208969687dc1113fc2ad0
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
The PIT is an unsupported device. On x86 based platforms, the LOAPIC_TIMER and
HPET_TIMER are the only supported timers.
Change-Id: Ic890838c811b7eb62008aef0c8a92786f1579217
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC and IOAPIC macros from board.h as they are no longer
appropriate since Kconfig options exist to use in their stead.
Change-Id: I2ce41a7a08d1859682389f35cd5a97c0e2cd5bf7
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the LOAPIC timer macros from board.h as they are no longer required
since appropriate Kconfig options exist to use in their stead.
Change-Id: Id0b509eba7cce1839b400f95b989bf886322e1a8
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Creating the LOAPIC timer Kconfig options permits future commits to remove
those settings from the relevant board.h files.
NOTE: No defconfig files have been modified as the LOAPIC_TIMER configuration
option is not enabled in any of them.
Change-Id: I7d97ed089cd4b734566b698183be95d3a166d71f
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Fixes a copy-paste error that inadvertently had the LOAPIC timer being
referred to as the PIT.
Change-Id: I4760d150cd6feb76b7d7384845898c6276bace83
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removes the HPET timer macros from board.h and uses the HPET timer Kconfig
options in their stead.
Change-Id: Ia0b3cd87716277ac25f12deb31d5c5934f355050
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds additional Kconfig options to the HPET timer for setting its base address,
IRQ, IRQ priority and condition for triggering an interrupt.
Change-Id: I80349c60237380129da9ef41ccf6850c6b874c3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
All driver Makefiles are adding the same cflags and they
have been done inconsistenly, make all drivers inherit
from the top level Makefile and remove unused includes.
Change-Id: Ie66d0ba7a418ac26f7eb709f50c887dc682e935c
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The name of the device is SYSTICK. The device name should be part of the
file name, like all other timer drivers we support. The name
'cortex_m_timer' said nothing about which device the driver is for, since
it's way too generic: it could be for any timer present on any Cortex-M
board.
Change-Id: I39b4f79c32516ec9aff82c55c0ca639fad1b52bb
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Removes references to obsolete BSP terminology. Where appropriate, replaces it
with platform terminology.
Change-Id: Ifb17f98bc12d3a28198810351629a109abdc18a5
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Qemu implements HPET so that it is connected to IRQ 2, which makes
necessary to use it in legacy emulation mode.
Add legacy emulation mode to HPET driver.
Change the way the HPET driver is initialized. QEMU requires that
the mode (one shot or periodic) gets set prior loading comparator
value.
Add debugging mode to HPET driver to ease the next port.
Change-Id: I668325d5968451585519a08b6c41863cf6e37f88
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Fixes the SYS_CLOCK_HW_CYCLES_PER_SEC Kconfig option dependencies such that
it can be overridden by a modified platform configuration file. This is
particularly important for the LOAPIC timer driver as
SYS_CLOCK_HW_CYCLES_PER_SEC is dependent upon the target's CPU/bus frequency.
Change-Id: I0fb49b4c540888cb1988c76e2a711a85e756f82c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates the timer driver dependencies to simplify the selection of a timer
driver. The timer driver menu only lists those drivers that are compatible
with the previously selected interrupt controller.
Change-Id: I5deea315f7c373c6660bacc411c6374e7b0ae84d
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The LOAPIC_TIMER_FREQ Kconfig option is not used.
Change-Id: I919fd2128f667e0b91467cb542041449738dd992
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Update microkernel systems to use the new driver initialization model on the
timer driver.
Change-Id: Ida9ef2a395d0dddf4104d490d78b13b11ea3c347
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Update nanokernel systems to use the new driver initialization model on the
timer driver.
Change-Id: I22d8619f56052f094482d73ab34c9d610492d8c0
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Prepares the _sys_clock_driver_init() routine to interface with the new driver
model. To this end, it must accept a pointer to a device structure and return
an integer.
Change-Id: I3c600ce1efb49c0864aae7b09663ca40d6289372
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The revised name conforms to Zephyr OS naming conventions.
Change-Id: I5bcdaf1df7da9d8ce5787a08b29ead91dd8f24ce
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Removing the parameter to timer_driver() as it is not used.
Change-Id: I09275287eeb541be0dd315056b4f2bc6cbc2573c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Remove function name from comment and add @brief instead.
Also capitilize first letter.
Change-Id: Ib708b49bf02e5bc89b0066637a55874e659637e0
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Previous comment style used RETRURNS:, use @return to comply
with javadoc style.
Change-Id: Ib1dffd92da1d97d60063ec5309b08049828f6661
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
The change replaces multiple asterisks to ** at
the beginning of comments and adds a space before
the asterisks at the beginning of lines.
Change-Id: I7656bde3bf4d9a31e38941e43b580520432dabc1
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Moves the Cortex-M timer driver so that it resides with the other timer
drivers.
Change-Id: I3324c53356efd9f5fd88752a98e4ae301ea38d47
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Adds the Kconfig option for selecting the Cortex-M systick timer. This helps
pave the way for moving the Cortex-M systick timer into the drivers/ directory.
Change-Id: Iee040083a425c9c1dbc5973991b89239e0a72eee
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
Updates references to CONFIG_BSP_DIR to CONFIG_PLATFORM as part of the
BSP -> platform clean up.
Note that despite the renaming, the usage of the config option remains
unchanged.
Change-Id: I2846c3f761cf09871019c0855bf1824ae03e6b3c
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
The revised name better reflects the fact that the file defines
macros in addition to declaring variables. In addition, most of
these APIs use the "sys_clock_" prefix, which aligns well with
the new file name.
Change-Id: Ib33517d4b19ec2455303b87200c677e87640fcbc
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Make device drivers use static interrupt registration procedure.
DYNAMIC_INT_STUBS configuration parameter was used only by device
drivers to switch between static and dynamic interrupt registration
procedures. Now it is obsolete and is removed.
uart_int_connect() function is removed. If UART device driver still
needs to register interrupt dynamically, it should use
irq_connect(uart_irq_get()).
Change-Id: I80c695f337456e9b0c1b0fd56716e35794f7bdb7
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to provide the same irq_connect() on all platforms
on x86, irq_connect() now uses a static array of interrupt
stubs. Device driver does not need to provide interrupt stub
to irq_connect() function.
Add NUM_DYNAMIC_STUBS configuration parameter, the number
of interrupt stubs used for dynamic interrupt registration.
Modify tests for unified interrupt register API
Tests that deal with interrupts are modified to work
with the new interrupt registration API.
Add CONFIG_NUM_DYNAMIC_STUBS option to dynamic interrupt projects
Projects that use dynamic interrupt handler registration on x86
have to include CONFIG_NUM_DYNAMIC_STUBS parameter in the
configuration.
Change-Id: Ic90c726485521a57cf695fd3edc8cac85d0b827d
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
In order to simplify x86 interrupt stub creation, each interrupt
controller implements an interrupt stub definition macro.
Add IRQ_CONNECT_STATIC() for static interrupt registration, and
construct the interrupt stubs name from device and interrupt
handler names.
Add IRQ_CONFIG() macro for the interrupt controller configuration.
On x86 platform it programs APIC to associate an IRQ number with
the interupt vector.
Add HPET_TIMER0_INT_PRI parameter to Quark platform header to
make it build correctly.
Change-Id: I24ad25e1aa807ffa63733a27ad882877fcad72af
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Since the system generator pre-registers K_ticker as the handler
for the system tick event, there is no need for the timer driver
to re-register it at run time.
Change-Id: I7f20c19e5c6ccc7dfb6117aa2d2647b9dec0e549
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Eliminates references to the obsolete OS name. In most cases the
name is simply removed, as it isn't necessary.
Change-Id: I32f9e7390e436aec008a9454b72657e129d65152
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of places where there is no need to include these files
at all, or places where these files are being indirectly included
due to the inclusion of nanokernel.h.
Change-Id: I7b58148af454b977830c00a6b519a78d0595603b
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Gets rid of single-line comments required by a previous set of
coding conventions. These comments provide no value to readers
and just clutter things up.
Change-Id: I2a08b12cf5026253de56979efdfc510e7e68defe
Signed-off-by: Allan Stephens <allan.stephens@windriver.com>
Closing comments to two CONFIG_MICROKERNEL ifdef blocks incorrectly identified
the ifdef block as NOT belonging to the microkernel.
Change-Id: Iee415e33d7f8a88c41009c5783b37da3a431461b
Signed-off-by: Peter Mitsis <peter.mitsis@windriver.com>
According to section 3.7 of Documentation/kbuild/makefiles.txt, using
EXTRA_CFLAGS in Makefiles is "still supported but their usage is
deprecated." However, using make EXTRA_CFLAGS="-DSOMETHING" results in
EXTRA_CFLAGS from Makefiles being overwritten, obviously breaking the
build. This patch converts to them to the newer ccflags-y which also
fixes the problem.
Change-Id: I6309439599d4c9cc184f9ecd941bde841982ef07
Signed-off-by: Anas Nashif <anas.nashif@intel.com>
Renaming the directory include/nanokernel to be include/arch, which
better reflects the real nature of the directory and the contents
inside.
Change-Id: I2bc33ebc6715e2f0403227a558279fdf52398ade
Signed-off-by: Dan Kalowsky <daniel.kalowsky@intel.com>
This commit standardize the Kconfig inclusion.
Selective sourcing of Kconfig files create conflict when merging
different configuration files (.config files).
Instead, now each kconfig symbols is dependant of its specific
DRV_* driver ksymbol.
Change-Id: I3d20d108a83f00d34067dc334758fd57e51feecf
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit add license headers to Kconfig files.
Change-Id: I79e60263b8c7b696463ecc84b8ad411af5415117
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
This commit fixes an issue with the inclusion path for the
board.h file for the pentium BSP.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I28172f8071b907aa61660ec8b8009e83cb2aa5ea
This commit adds the Makefiles that describe the object-bundles
for the drivers directory and every subdirectory below.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: Id77cff9cf0ab51827acc2aef32cbed3ec3ad586b
This commit adds the Kconfig files that describe the CONFIG
symbols that belongs to the drivers directory and subdirectories.
Signed-off-by: Juan Manuel Cruz <juan.m.cruz.alcaraz@linux.intel.com>
Change-Id: I924835ece11a3d597e77a55ace21d724dd5ddbe5
Replace duplicate code and will allow for further cleanup by possibly
consolidating micro/nano code that is currently guarded by preprocessor
conditionals.
Change-Id: I9aa9966c581244646b6ea317ef8b51fef9054dd4
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
The correct call is nano_isr_lifo_put, but they are aliases of each
other, so that never caused an issue at runtime.
Change-Id: Ibec8e6d3377133e5e67589c5a3ad1b8fb3cc652c
Signed-off-by: Benjamin Walsh <benjamin.walsh@windriver.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ib426dad55e318bb8176c4e7660711db1484cc245
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I6098649b507dae09d4d0f19e712bc0fe3686dfc0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ie0770bd9ff872a9ed2b567baca1514d15fe6c90a
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I1f95ae3c2fd44ae3bd366cd33208551cf5ea6d10
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5681dc0c33cc42ee48270eab418c99cc923f96b1
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Id7391e40bb709f03c58f552d6b783cad834bbdcc
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I28cbf0d02600d31548393870e712e6da062048da
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Ic28658f68d473b3a163fe5d97f611bfd572f140e
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
The prefix underscore is removed due to it's a local variable.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I31e267c1479dfaeeb0fba8c6ba0da45a3c011c0f
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating local variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" -o -name "*.arch" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I80ccb884f1ffd8f3740cd9298787462485b08024
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
In order to have a better compiler support consolidate
inline assembler code in a set of header files.
If another compiler is used, that supports a different
inline assembler format, asm_inline_<compiler name>.h
heder files have to be provided.
Change-Id: Iecc7d96419efd767a8463933badd4db4a557de5b
Signed-off-by: Dmitriy Korovkin <dmitriy.korovkin@windriver.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I4e5c9419fe0ccbc4b2990b96fc95c697decc18e0
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I5e249e34ee9666666e31db6b9f71fe2abcc22400
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: I2e501394b7fa4264d9854659e2dd008e5c94b540
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>
Updating global variable's name to follow a consistent naming convention.
Change accomplished with the following script:
#!/bin/bash
echo "Searching for ${1} to replace with ${2}"
find ./ \( -name "*.[chs]" -o -name "sysgen.py" -o -name "*.kconf" \) \
! -path "./host/src/genIdt/*" \
! -path "*/outdir/*" | xargs sed -i 's/\b'${1}'\b/'${2}'/g';
Change-Id: Iebefec0e02cbb838564dd71fd4424c1adbff31f5
Signed-off-by: Yonattan Louise <yonattan.a.louise.mendoza@intel.com>